lkml.org 
[lkml]   [2014]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/10] mfd: Add TI LMU driver
> TI LMU (Lighting Management Unit) driver supports lighting devices such like
> LM3532, LM3631, LM3633, LM3695 and LM3697.
>
> LMU devices has common features as below.
> - I2C interface for accessing device registers
> - Hardware enable pin control
> - Backlight brightness control
> - Light effect driver for backlight and LED patterns
>
> It contains backlight, light effect, LED and regulator driver.
>
> Backlight
> ---------
> It's handled by TI LMU backlight common driver and chip dependent driver.
> Please refer to separate patches for ti-lmu-backlight.
>
> Light effect
> ------------
> LMU effect driver is used for setting any light effects.
> Each device has specific time value and register map.
> Backlight and LED driver can use consitent APIs for light effects.
>
> There are two lists for effect management. LMU effect list and pending list.
> Light effect list is added when ti-lmu-effect driver is loaded by referencing
> platform resource data.
> However, it can be a problem because some LMU device requests the effect
> in advance of loading ti-lmu-effect driver.
>
> For example, LM3532 backlight driver requests light ramp effects before
> ti-lmu-effect is loaded.
> Then, requested effect can not be handled because it doesn't exist in the list.
> To solve this situation, pending request list is used.
> If requested effect is not in the list, just insert it into the pending list.
> And then pending request is handled as soon as the effect is added.
>
> LED indicator
> -------------
> LM3633 has 6 indicator LEDs. Programmable pattern is supported.
>
> Regulator
> ---------
> LM3631 has 5 regulators for the display bias.
>
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Milo Kim <milo.kim@ti.com>
> ---
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ti-lmu-effect.c | 328 +++++++++++++++++++++++++
> drivers/mfd/ti-lmu.c | 464 +++++++++++++++++++++++++++++++++++
> include/linux/mfd/ti-lmu-effect.h | 109 ++++++++
> include/linux/mfd/ti-lmu-register.h | 269 ++++++++++++++++++++
> include/linux/mfd/ti-lmu.h | 150 +++++++++++
> 7 files changed, 1333 insertions(+)
> create mode 100644 drivers/mfd/ti-lmu-effect.c
> create mode 100644 drivers/mfd/ti-lmu.c
> create mode 100644 include/linux/mfd/ti-lmu-effect.h
> create mode 100644 include/linux/mfd/ti-lmu-register.h
> create mode 100644 include/linux/mfd/ti-lmu.h

<snip>

> +static u8 ti_lmu_effect_get_ramp_index(struct ti_lmu_effect *lmu_effect,
> + int msec)
> +{
> + const int *table = NULL;
> + int size = 0;
> + int index = 0;
> + int i;
> +
> + switch (lmu_effect->lmu->id) {
> + case LM3532:
> + table = lm3532_ramp_table;
> + size = ARRAY_SIZE(lm3532_ramp_table);
> + break;
> + case LM3631:
> + table = lm3631_ramp_table;
> + size = ARRAY_SIZE(lm3631_ramp_table);
> + break;
> + case LM3633:
> + case LM3697: /* LM3697 has same ramp table as LM3633 */
> + table = lm3633_ramp_table;
> + size = ARRAY_SIZE(lm3633_ramp_table);
> + break;
> + default:
> + break;
> + }
> +
> + if (msec <= table[0]) {
> + index = 0;
> + goto out;

Just:
return 0;

> + }
> +
> + if (msec >= table[size-1]) {
> + index = size - 1;
> + goto out;

Just:
return index;

> + }
> +
> + /* Find appropriate register index from the table */
> + for (i = 1; i < size; i++) {
> + if (msec >= table[i-1] && msec < table[i]) {
> + index = i - 1;
> + goto out;

Same here.

> + }
> + }
> +
> + return 0;
> +out:
> + return index;

Remove this.

> +}
> +
> +static u8 ti_lmu_effect_get_time_index(struct ti_lmu_effect *lmu_effect,
> + int msec)
> +{
> + u8 idx, offset;
> +
> + /*
> + * Find appropriate register index around input time value
> + *
> + * 0 <= time <= 1000 : 16ms step
> + * 1000 < time <= 9700 : 131ms step, base index is 61
> + */
> +
> + msec = min_t(int, msec, LMU_EFFECT_MAX_TIME_PERIOD);
> +
> + if (msec >= 0 && msec <= 1000) {
> + idx = msec / 16;
> + if (idx > 1)
> + idx--;
> + offset = 0;
> + } else {
> + idx = (msec - 1000) / 131;
> + offset = 61;

What are 131 and 61? Sounds like magic, require #defines or at least a
comment.

<snip>

> + if (lmu_effect) {
> + cbfunc(lmu_effect, req_id, data);
> + goto out;

This doesn't do anything. Just return from here.

> + }

<snip>

> +out:
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ti_lmu_effect_request);

<snip>

> diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c
> new file mode 100644
> index 0000000..e97d686
> --- /dev/null
> +++ b/drivers/mfd/ti-lmu.c
> @@ -0,0 +1,464 @@
> +/*
> + * TI LMU(Lighting Management Unit) Core Driver
> + *
> + * Copyright 2014 Texas Instruments
> + *
> + * Author: Milo Kim <milo.kim@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.

Move this to the bottom of the header.

> + * LMU MFD supports LM3532, LM3631, LM3633, LM3695 and LM3697.
> + *
> + * LM3532: backlight + light effect
> + * LM3631: backlight + light effect + regulators
> + * LM3633: backlight + light effect + LED indicators
> + * LM3695: backlight
> + * LM3697: backlight + light effect
> + *
> + * Those devices have common features as below.
> + *
> + * - I2C interface for accessing device registers
> + * - Hardware enable pin control
> + * - Backlight brightness control with current settings
> + * - Light effect driver for backlight and LED patterns
> + */

kernel.h?
module.h?

> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/ti-lmu.h>
> +#include <linux/mfd/ti-lmu-effect.h>
> +#include <linux/mfd/ti-lmu-register.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/slab.h>
> +
> +#define LMU_IMAX_OFFSET 6
> +

<snip>

> +static const struct resource lm3633_effect_resources[] = {
> + {
> + .name = LM3633_EFFECT_BL0_RAMPUP,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(BL0_RAMPUP),
> + },
> + {
> + .name = LM3633_EFFECT_BL0_RAMPDOWN,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(BL0_RAMPDN),
> + },
> + {
> + .name = LM3633_EFFECT_BL1_RAMPUP,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(BL1_RAMPUP),
> + },
> + {
> + .name = LM3633_EFFECT_BL1_RAMPDOWN,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(BL1_RAMPDN),
> + },
> + {
> + .name = LM3633_EFFECT_PTN_DELAY,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(DELAY),
> + },
> + {
> + .name = LM3633_EFFECT_PTN_HIGHTIME,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(HIGHTIME),
> + },
> + {
> + .name = LM3633_EFFECT_PTN_LOWTIME,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(LOWTIME),
> + },
> + {
> + .name = LM3633_EFFECT_PTN0_RAMPUP,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(PTN0_RAMPUP),
> + },
> + {
> + .name = LM3633_EFFECT_PTN0_RAMPDOWN,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(PTN0_RAMPDN),
> + },
> + {
> + .name = LM3633_EFFECT_PTN1_RAMPUP,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(PTN1_RAMPUP),
> + },
> + {
> + .name = LM3633_EFFECT_PTN1_RAMPDOWN,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(PTN1_RAMPDN),
> + },
> + {
> + .name = LM3633_EFFECT_PTN_LOWBRT,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(LOWBRT),
> + },
> + {
> + .name = LM3633_EFFECT_PTN_HIGHBRT,
> + .flags = IORESOURCE_REG,
> + .start = LM3633_EFFECT_REGISTER(HIGHBRT),
> + },
> +};

Can you define a MACRO to do all of these as one liners?

<snip>

> +static int ti_lmu_parse_dt(struct device *dev, struct ti_lmu *lmu)
> +{

<snip>

> + pdata->en_gpio = of_get_named_gpio(node, "ti,enable-gpio", 0);

There is a global DT property for this already.

> +static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> +{

<snip>

> + lmu->id = id->driver_data;
> + switch (lmu->id) {
> + case LM3532:
> + lmu_regmap_config.max_register = LM3532_MAX_REGISTERS;
> + break;
> + case LM3631:
> + lmu_regmap_config.max_register = LM3631_MAX_REGISTERS;
> + break;
> + case LM3633:
> + lmu_regmap_config.max_register = LM3633_MAX_REGISTERS;
> + break;
> + case LM3695:
> + lmu_regmap_config.max_register = LM3695_MAX_REGISTERS;
> + break;
> + case LM3697:
> + lmu_regmap_config.max_register = LM3697_MAX_REGISTERS;
> + break;
> + default:
> + break;
> + }

As there are so many of these, it might be nicer to pull these out
into a seperate function.

<snip>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-17 11:21    [W:1.463 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site