lkml.org 
[lkml]   [2014]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device
From
Hi Laurent,

On Mon, Feb 17, 2014 at 3:18 AM, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> Hi Thomas,
>
> On Saturday 15 February 2014 13:46:54 Thomas Gleixner wrote:
>> On Fri, 14 Feb 2014, Laurent Pinchart wrote:
>> > CMT hardware devices can support multiple channels, with global
>> > registers and per-channel registers. The sh_cmt driver currently models
>> > the hardware with one Linux device per channel. This model makes it
>> > difficult to handle global registers in a clean way.
>> >
>> > Add support for a new model that uses one Linux device per timer with
>> > multiple channels per device. This requires changes to platform data,
>> > add new channel configuration fields.
>> >
>> > Support for the legacy model is kept and will be removed after all
>> > platforms switch to the new model.
>> >
>> > Signed-off-by: Laurent Pinchart
>> > <laurent.pinchart+renesas@ideasonboard.com>
>> > ---
>> >
>> > drivers/clocksource/sh_cmt.c | 299 +++++++++++++++++++++++++++++---------
>> > include/linux/sh_timer.h | 9 ++
>> > 2 files changed, 239 insertions(+), 69 deletions(-)
>> >
>> > diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
>> > index 5280231..8390f0f 100644
>> > --- a/drivers/clocksource/sh_cmt.c
>> > +++ b/drivers/clocksource/sh_cmt.c
>> > @@ -53,7 +53,16 @@ struct sh_cmt_device;
>> >
>> > * channel registers block. All other versions have a shared start/stop
>> > register * located in the global space.
>> > *
>> >
>> > - * Note that CMT0 on r8a73a4, r8a7790 and r8a7791, while implementing
>> > 32-bit + * Channels are indexed from 0 to N-1 in the documentation. The
>> > channel index + * infers the start/stop bit position in the control
>> > register and the channel + * registers block address. Some CMT instances
>> > have a subset of channels + * available, in which case the index in the
>> > documentation doesn't match the + * "real" index as implemented in
>> > hardware. This is for instance the case with + * CMT0 on r8a7740, which
>> > is a 32-bit variant with a single channel numbered 0 + * in the
>> > documentation but using start/stop bit 5 and having its registers + *
>> > block at 0x60.
>> > + *
>> > + * Similarly CMT0 on r8a73a4, r8a7790 and r8a7791, while implementing
>> > 32-bit>
>> > * channels only, is a 48-bit gen2 CMT with the 48-bit channels
>> > unavailable.
>> > */
>> >
>> > @@ -85,11 +94,15 @@ struct sh_cmt_info {
>> >
>> > struct sh_cmt_channel {
>> >
>> > struct sh_cmt_device *cmt;
>> >
>> > - unsigned int index;
>> >
>> > - void __iomem *base;
>> > + unsigned int index; /* Index in the documentation */
>> > + unsigned int hwidx; /* Real hardware index */
>> > +
>> > + void __iomem *iostart;
>> > + void __iomem *ioctrl;
>> >
>> > struct irqaction irqaction;
>>
>> While you are at it, can you please get rid of that irqaction and use
>> request_irq() ?
>
> The driver claims it can't use request_irq() because the function is not
> available for early platform devices. If the situation has changed I'd gladly
> get rid of irqaction.

With the risk of stating the obvious, this depends on how early the
early platform device stuff is being run. The actual location may not
be the same on SH and ARM for instance.

On ARM we are doing all we can to initialize these devices as late as
ever possible in the MULTIPLAFORM (DT reference) case. Once we manage
to remove the legacy ARM case then there is one less user of early
platform timers.

One perhaps reasonable way forward could be to use request_irq() in
case of DT and leave the legacy platform data case to rely on
irqaction.

Cheers,

/ magnus


\
 
 \ /
  Last update: 2014-02-17 03:21    [W:0.112 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site