lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH -tip v3 00/11] perf-probe: Updates for handling local functions correctly and distro debuginfo
Ping? :)

(2014/02/06 14:32), Masami Hiramatsu wrote:
> Hi,
>
> Here is the 3rd version of the series for handling local
> functions correctly with perf-probe. This version also
> includes distro debuginfo-file support (a small
> enhancement, based on existing feature).
>
> In this version, I used ref_reloc_sym based probe point
> instead of absolute address/"_stext", because kASLR
> changes the address offset randomly and the debuginfo
> doesn't know that offset. Recently perftools supports
> kASLR by introducing ref_reloc_sym (which is usually
> "_text" or "_stext"). Since we already ensured that
> the kmap->ref_reloc_sym symbol exists in the kernel,
> it is safe to reuse it for the reference point of
> probe points.
>
> Note that this series requires a bugfix patch:
> perf-probe: Do not add offset to uprobe address
> https://lkml.org/lkml/2014/2/5/7
>
>
> Issue 1)
> Current perf-probe can't handle probe-points for kprobes,
> since it uses symbol-based probe definition. The symbol
> based definition is easy to read and robust for differnt
> kernel and modules. However, when user gives a local
> function name which has several different instances,
> it may put probes on wrong (or unexpected) address.
> On the other hand, since uprobe events are based on the
> actual address, it can avoid this issue.
>
> E.g.
> In the case to probe t_show local functions (which has
> 4 different instances.
> ----
> # grep " t_show\$" /proc/kallsyms
> ffffffff810d9720 t t_show
> ffffffff810e2e40 t t_show
> ffffffff810ece30 t t_show
> ffffffff810f4ad0 t t_show
> # ./perf probe -fa "t_show \$vars"
> Added new events:
> probe:t_show (on t_show with $vars)
> probe:t_show_1 (on t_show with $vars)
> probe:t_show_2 (on t_show with $vars)
> probe:t_show_3 (on t_show with $vars)
>
> You can now use it in all perf tools, such as:
>
> perf record -e probe:t_show_3 -aR sleep 1
> ----
> OK, we have 4 different t_show()s. All functions have
> different arguments as below;
> ----
> # cat /sys/kernel/debug/tracing/kprobe_events
> p:probe/t_show t_show m=%di:u64 v=%si:u64
> p:probe/t_show_1 t_show m=%di:u64 v=%si:u64 t=%si:u64
> p:probe/t_show_2 t_show m=%di:u64 v=%si:u64 fmt=%si:u64
> p:probe/t_show_3 t_show m=%di:u64 v=%si:u64 file=%si:u64
> ----
> However, all of them have been put on the *same* address.
> ----
> # cat /sys/kernel/debug/kprobes/list
> ffffffff810d9720 k t_show+0x0 [DISABLED]
> ffffffff810d9720 k t_show+0x0 [DISABLED]
> ffffffff810d9720 k t_show+0x0 [DISABLED]
> ffffffff810d9720 k t_show+0x0 [DISABLED]
> ----
> oops...
>
> Issue 2)
> With the debuginfo, issue 1 can be solved by using
> _stext-based probe definition instead of local symbol-based.
> However, without debuginfo, perf-probe can only use
> symbol-map in the binary (or kallsyms). The map provides
> symbol find methods, but it returns only the first matched
> symbol. To put probes on all functions which have given
> symbol, we need a symbol-list iterator for the map.
>
> E.g. (built perf with NO_DWARF=1)
> In the case to probe t_show and identity__map_ip in perf.
> ----
> # ./perf probe -a t_show
> Added new event:
> probe:t_show (on t_show)
>
> You can now use it in all perf tools, such as:
>
> perf record -e probe:t_show -aR sleep 1
>
> # ./perf probe -x perf -a identity__map_ip
> no symbols found in /kbuild/ksrc/linux-3/tools/perf/perf, maybe install a debug package?
> Failed to load map.
> Error: Failed to add events. (-22)
> ----
> oops.....
>
>
> Solutions)
> To solve the issue 1, this series changes perf probe to
> use _stext-based probe definition. This means that we
> also need to fix the --list options to analyze actual
> probe address from _stext address. (and that has been
> done in this series).
>
> E.g. with this series;
> ----
> # ./perf probe -a "t_show \$vars"
> Added new events:
> probe:t_show (on t_show with $vars)
> probe:t_show_1 (on t_show with $vars)
> probe:t_show_2 (on t_show with $vars)
> probe:t_show_3 (on t_show with $vars)
>
> You can now use it in all perf tools, such as:
>
> perf record -e probe:t_show_3 -aR sleep 1
>
> # cat /sys/kernel/debug/tracing/kprobe_events
> p:probe/t_show _stext+889880 m=%di:u64 v=%si:u64
> p:probe/t_show_1 _stext+928568 m=%di:u64 v=%si:u64 t=%si:u64
> p:probe/t_show_2 _stext+969512 m=%di:u64 v=%si:u64 fmt=%si:u64
> p:probe/t_show_3 _stext+1001416 m=%di:u64 v=%si:u64 file=%si:u64
>
> # cat /sys/kernel/debug/kprobes/list
> ffffffffb50d95e0 k t_show+0x0 [DISABLED]
> ffffffffb50e2d00 k t_show+0x0 [DISABLED]
> ffffffffb50f4990 k t_show+0x0 [DISABLED]
> ffffffffb50eccf0 k t_show+0x0 [DISABLED]
> ----
> This time we can see the events are set in different
> addresses.
>
> And for the issue 2, the last patch introduces symbol
> iterators for map, dso and symbols (since the symbol
> list is the symbols and it is included in dso, and perf
> probe accesses dso via map).
>
> E.g. with this series (built perf with NO_DWARF=1);
> ----
> # ./perf probe -a t_show
> Added new events:
> probe:t_show (on t_show)
> probe:t_show_1 (on t_show)
> probe:t_show_2 (on t_show)
> probe:t_show_3 (on t_show)
>
> You can now use it in all perf tools, such as:
>
> perf record -e probe:t_show_3 -aR sleep 1
>
> # ./perf probe -x perf -a identity__map_ip
> Added new events:
> probe_perf:identity__map_ip (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf)
> probe_perf:identity__map_ip_1 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf)
> probe_perf:identity__map_ip_2 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf)
> probe_perf:identity__map_ip_3 (on identity__map_ip in /kbuild/ksrc/linux-3/tools/perf/perf)
>
> You can now use it in all perf tools, such as:
>
> perf record -e probe_perf:identity__map_ip_3 -aR sleep 1
> ----
> Now, even without the debuginfo, both the kprobe and
> uprobe are set 4 different places correctly.
>
> BTW, while testing above, I've found some bugs and
> another minor issue; perf-probe doesn't show the
> modules and binaries in which probes are set.
> I've also fixed it in this series as below.
>
> Without the fix;
>
> # ./perf probe -m drm drm_av_sync_delay
> # ./perf probe -x perf dso__load_vmlinux
>
> # ./perf probe -l
> probe:drm_av_sync_delay (on drm_av_sync_delay)
> probe_perf:dso__load_vmlinux (on 0x000000000006d110)
>
> With this fix;
>
> # ./perf probe -l
> probe:drm_av_sync_delay (on drm_av_sync_delay in drm)
> probe_perf:dso__load_vmlinux (on 0x000000000006d110 in /kbuild/ksrc/linux-3/tools/perf/perf)
>
> Changes from v2:
> - Use ref_reloc_sym instead of "_stext" for reference point.
> (Thanks for Namhyung Kim!)
> - Add 2 cleanup patches for reducing the redundant features.
> - Add distro-style debuginfo support.
>
> TODO:
> - Support local functions in modules. This requires kernel
> side enhancement to allow setting probes by the relative
> addresses in modules too.
> - Uprobe-event MUST traces the change of given binary even
> when the event is disabled. I've found that user can replace
> the target binary after setting events and the events can be
> enabled on the different instructions...
>
> ---
>
> Masami Hiramatsu (11):
> [BUGFIX] perf-probe: Fix to do exit call for symbol maps
> [CLEANUP] perf-probe: Remove incorrect symbol check for --list
> [CLEANUP] perf-probe: Replace line_list with intlist
> [CLEANUP] perf-probe: Unify show_available_functions for uprobes/kprobes
> perf-probe: Show in what binaries/modules probes are set
> perf-probe: Use ref_reloc_sym based address instead of the symbol name
> perf-probe: Find given address from offline dwarf
> perf-probe: Show appropriate symbol for ref_reloc_sym based kprobes
> perf-probe: Show source-level or symbol-level info for uprobes
> perf-probe: Allow to add events on the local functions
> perf probe: Support distro-style debuginfo for uprobe
>
>
> tools/perf/builtin-probe.c | 12 -
> tools/perf/util/dso.h | 10
> tools/perf/util/map.h | 10
> tools/perf/util/probe-event.c | 863 ++++++++++++++++++++++------------------
> tools/perf/util/probe-event.h | 12 -
> tools/perf/util/probe-finder.c | 198 ++-------
> tools/perf/util/probe-finder.h | 5
> tools/perf/util/symbol.h | 11 +
> 8 files changed, 566 insertions(+), 555 deletions(-)
>


--
Masami HIRAMATSU
IT Management Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com




\
 
 \ /
  Last update: 2014-02-14 07:42    [W:0.228 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site