lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 2/4] Documentation: devicetree: bindings for APM X-Gene SoC QMTM
Date
This patch adds devicetree bindings documentation for APM X-Gene SoC Queue
Manager/Traffic Manager.

Signed-off-by: Ravi Patel <rapatel@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
---
.../devicetree/bindings/mailbox/apm-xgene-qmtm.txt | 53 ++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/apm-xgene-qmtm.txt

diff --git a/Documentation/devicetree/bindings/mailbox/apm-xgene-qmtm.txt b/Documentation/devicetree/bindings/mailbox/apm-xgene-qmtm.txt
new file mode 100644
index 0000000..cb17d5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/apm-xgene-qmtm.txt
@@ -0,0 +1,53 @@
+* APM X-Gene SoC Queue Manager/Traffic Manager mailbox nodes
+
+Mailbox nodes are defined to describe on-chip Queue Managers in APM X-Gene SoC.
+APM X-Gene SoC Ethernet, PktDMA (XOR Engine), and Security Engine subsystems
+communicate with a central Queue Manager using messages which include
+information about the work to be performed and the location of the associated
+data buffers. There are multiple instances of QMTM. Each QMTM instance has its
+own node. Its corresponding clock nodes are shown below.
+
+Required properties:
+- compatible : Shall be "apm,xgene-qmtm"
+- reg : First memory resource shall be the QMTM register
+ memory resource.
+ Second memory resource shall be the QMTM IO-Fabric
+ memory resource.
+- #mailbox-cells : Shall be 4 as it expects following arguments
+ First cell for 64-bit mailbox bus address MSB.
+ Second cell for 64-bit mailbox bus address LSB.
+ Third cell for 32-bit mailbox size.
+ Fourth cell for 32-bit mailbox signal/id value.
+- interrupts : First interrupt resource shall be the QMTM Error
+ interrupt.
+ Remaining interrupt resources shall be the Ingress
+ work message interrupt mapping for receiver,
+ receiving work messages for the QMTM.
+- clocks : Reference to the clock entry.
+
+Optional properties:
+- status : Shall be "ok" if enabled or "disabled" if disabled.
+ Default is "ok".
+
+Example:
+ qmlclk: qmlclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clock-names = "socplldiv2";
+ status = "ok";
+ csr-offset = <0x0>;
+ csr-mask = <0x3>;
+ enable-offset = <0x8>;
+ enable-mask = <0x3>;
+ };
+
+ qmlite: mailbox@17030000 {
+ compatible = "apm,xgene-qmtm";
+ #mailbox-cells = <4>;
+ status = "ok";
+ reg = <0x0 0x17030000 0x0 0x10000>,
+ <0x0 0x10000000 0x0 0x400000>;
+ interrupts = <0x0 0x40 0x4>,
+ <0x0 0x3c 0x4>;
+ clocks = <&qmlclk 0>;
+ };
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-15 04:01    [W:0.100 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site