lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RFC 1/3] video: move fbdev to drivers/video/fbdev
From
On Fri, Feb 14, 2014 at 6:18 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> The drivers/video directory is a mess. It contains generic video related
> files, directories for backlight, console, linux logo, lots of fbdev
> device drivers, fbdev framework files.
>
> Make some order into the chaos by creating drivers/video/fbdev
> directory, and move all fbdev related files there.
>
> No functionality is changed, although I guess it is possible that some
> subtle Makefile build order related issue could be created by this
> patch.

+1 for the series.. I could go either way on #2/3, but either way,
consolidating all the fbdev stuff is a nice cleanup

BR,
-R

> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/Makefile | 4 +-
> drivers/video/Kconfig | 2483 +-------------------
> drivers/video/Makefile | 168 +-
> drivers/video/{ => fbdev}/68328fb.c | 0
> drivers/video/fbdev/Kconfig | 2481 +++++++++++++++++++
> drivers/video/fbdev/Makefile | 167 ++
> drivers/video/{ => fbdev}/acornfb.c | 0
> drivers/video/{ => fbdev}/acornfb.h | 0
> drivers/video/{ => fbdev}/amba-clcd.c | 0
> drivers/video/{ => fbdev}/amifb.c | 0
> drivers/video/{ => fbdev}/arcfb.c | 0
> drivers/video/{ => fbdev}/arkfb.c | 0
> drivers/video/{ => fbdev}/asiliantfb.c | 0
> drivers/video/{ => fbdev}/atafb.c | 0
> drivers/video/{ => fbdev}/atafb.h | 0
> drivers/video/{ => fbdev}/atafb_iplan2p2.c | 0
> drivers/video/{ => fbdev}/atafb_iplan2p4.c | 0
> drivers/video/{ => fbdev}/atafb_iplan2p8.c | 0
> drivers/video/{ => fbdev}/atafb_mfb.c | 0
> drivers/video/{ => fbdev}/atafb_utils.h | 0
> drivers/video/{ => fbdev}/atmel_lcdfb.c | 0
> drivers/video/{ => fbdev}/aty/Makefile | 0
> drivers/video/{ => fbdev}/aty/ati_ids.h | 0
> drivers/video/{ => fbdev}/aty/aty128fb.c | 0
> drivers/video/{ => fbdev}/aty/atyfb.h | 0
> drivers/video/{ => fbdev}/aty/atyfb_base.c | 0
> drivers/video/{ => fbdev}/aty/mach64_accel.c | 0
> drivers/video/{ => fbdev}/aty/mach64_ct.c | 0
> drivers/video/{ => fbdev}/aty/mach64_cursor.c | 0
> drivers/video/{ => fbdev}/aty/mach64_gx.c | 0
> drivers/video/{ => fbdev}/aty/radeon_accel.c | 0
> drivers/video/{ => fbdev}/aty/radeon_backlight.c | 0
> drivers/video/{ => fbdev}/aty/radeon_base.c | 0
> drivers/video/{ => fbdev}/aty/radeon_i2c.c | 0
> drivers/video/{ => fbdev}/aty/radeon_monitor.c | 0
> drivers/video/{ => fbdev}/aty/radeon_pm.c | 0
> drivers/video/{ => fbdev}/aty/radeonfb.h | 0
> drivers/video/{ => fbdev}/au1100fb.c | 0
> drivers/video/{ => fbdev}/au1100fb.h | 0
> drivers/video/{ => fbdev}/au1200fb.c | 0
> drivers/video/{ => fbdev}/au1200fb.h | 0
> drivers/video/{ => fbdev}/auo_k1900fb.c | 0
> drivers/video/{ => fbdev}/auo_k1901fb.c | 0
> drivers/video/{ => fbdev}/auo_k190x.c | 0
> drivers/video/{ => fbdev}/auo_k190x.h | 0
> drivers/video/{ => fbdev}/bf537-lq035.c | 0
> drivers/video/{ => fbdev}/bf54x-lq043fb.c | 0
> drivers/video/{ => fbdev}/bfin-lq035q1-fb.c | 0
> drivers/video/{ => fbdev}/bfin-t350mcqb-fb.c | 0
> drivers/video/{ => fbdev}/bfin_adv7393fb.c | 0
> drivers/video/{ => fbdev}/bfin_adv7393fb.h | 0
> drivers/video/{ => fbdev}/broadsheetfb.c | 0
> drivers/video/{ => fbdev}/bt431.h | 0
> drivers/video/{ => fbdev}/bt455.h | 0
> drivers/video/{ => fbdev}/bw2.c | 0
> drivers/video/{ => fbdev}/c2p.h | 0
> drivers/video/{ => fbdev}/c2p_core.h | 0
> drivers/video/{ => fbdev}/c2p_iplan2.c | 0
> drivers/video/{ => fbdev}/c2p_planar.c | 0
> drivers/video/{ => fbdev}/carminefb.c | 0
> drivers/video/{ => fbdev}/carminefb.h | 0
> drivers/video/{ => fbdev}/carminefb_regs.h | 0
> drivers/video/{ => fbdev}/cfbcopyarea.c | 0
> drivers/video/{ => fbdev}/cfbfillrect.c | 0
> drivers/video/{ => fbdev}/cfbimgblt.c | 0
> drivers/video/{ => fbdev}/cg14.c | 0
> drivers/video/{ => fbdev}/cg3.c | 0
> drivers/video/{ => fbdev}/cg6.c | 0
> drivers/video/{ => fbdev}/chipsfb.c | 0
> drivers/video/{ => fbdev}/cirrusfb.c | 0
> drivers/video/{ => fbdev}/clps711xfb.c | 0
> drivers/video/{ => fbdev}/cobalt_lcdfb.c | 0
> drivers/video/{ => fbdev}/controlfb.c | 0
> drivers/video/{ => fbdev}/controlfb.h | 0
> drivers/video/{ => fbdev}/cyber2000fb.c | 0
> drivers/video/{ => fbdev}/cyber2000fb.h | 0
> drivers/video/{ => fbdev}/da8xx-fb.c | 0
> drivers/video/{ => fbdev}/dnfb.c | 0
> drivers/video/{ => fbdev}/edid.h | 0
> drivers/video/{ => fbdev}/efifb.c | 0
> drivers/video/{ => fbdev}/ep93xx-fb.c | 0
> drivers/video/{ => fbdev}/exynos/Kconfig | 0
> drivers/video/{ => fbdev}/exynos/Makefile | 0
> drivers/video/{ => fbdev}/exynos/exynos_dp_core.c | 0
> drivers/video/{ => fbdev}/exynos/exynos_dp_core.h | 0
> drivers/video/{ => fbdev}/exynos/exynos_dp_reg.c | 0
> drivers/video/{ => fbdev}/exynos/exynos_dp_reg.h | 0
> drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi.c | 0
> .../{ => fbdev}/exynos/exynos_mipi_dsi_common.c | 0
> .../{ => fbdev}/exynos/exynos_mipi_dsi_common.h | 0
> .../{ => fbdev}/exynos/exynos_mipi_dsi_lowlevel.c | 0
> .../{ => fbdev}/exynos/exynos_mipi_dsi_lowlevel.h | 0
> .../{ => fbdev}/exynos/exynos_mipi_dsi_regs.h | 0
> drivers/video/{ => fbdev}/exynos/s6e8ax0.c | 0
> drivers/video/{ => fbdev}/fb-puv3.c | 0
> drivers/video/{ => fbdev}/fb_ddc.c | 0
> drivers/video/{ => fbdev}/fb_defio.c | 0
> drivers/video/{ => fbdev}/fb_draw.h | 0
> drivers/video/{ => fbdev}/fb_notify.c | 0
> drivers/video/{ => fbdev}/fb_sys_fops.c | 0
> drivers/video/{ => fbdev}/fbcmap.c | 0
> drivers/video/{ => fbdev}/fbcvt.c | 0
> drivers/video/{ => fbdev}/fbmem.c | 0
> drivers/video/{ => fbdev}/fbmon.c | 0
> drivers/video/{ => fbdev}/fbsysfs.c | 0
> drivers/video/{ => fbdev}/ffb.c | 0
> drivers/video/{ => fbdev}/fm2fb.c | 0
> drivers/video/{ => fbdev}/fsl-diu-fb.c | 0
> drivers/video/{ => fbdev}/g364fb.c | 0
> drivers/video/{ => fbdev}/gbefb.c | 0
> drivers/video/{ => fbdev}/geode/Kconfig | 0
> drivers/video/{ => fbdev}/geode/Makefile | 0
> drivers/video/{ => fbdev}/geode/display_gx.c | 0
> drivers/video/{ => fbdev}/geode/display_gx1.c | 0
> drivers/video/{ => fbdev}/geode/display_gx1.h | 0
> drivers/video/{ => fbdev}/geode/geodefb.h | 0
> drivers/video/{ => fbdev}/geode/gx1fb_core.c | 0
> drivers/video/{ => fbdev}/geode/gxfb.h | 0
> drivers/video/{ => fbdev}/geode/gxfb_core.c | 0
> drivers/video/{ => fbdev}/geode/lxfb.h | 0
> drivers/video/{ => fbdev}/geode/lxfb_core.c | 0
> drivers/video/{ => fbdev}/geode/lxfb_ops.c | 0
> drivers/video/{ => fbdev}/geode/suspend_gx.c | 0
> drivers/video/{ => fbdev}/geode/video_cs5530.c | 0
> drivers/video/{ => fbdev}/geode/video_cs5530.h | 0
> drivers/video/{ => fbdev}/geode/video_gx.c | 0
> drivers/video/{ => fbdev}/goldfishfb.c | 0
> drivers/video/{ => fbdev}/grvga.c | 0
> drivers/video/{ => fbdev}/gxt4500.c | 0
> drivers/video/{ => fbdev}/hecubafb.c | 0
> drivers/video/{ => fbdev}/hgafb.c | 0
> drivers/video/{ => fbdev}/hitfb.c | 0
> drivers/video/{ => fbdev}/hpfb.c | 0
> drivers/video/{ => fbdev}/hyperv_fb.c | 0
> drivers/video/{ => fbdev}/i740_reg.h | 0
> drivers/video/{ => fbdev}/i740fb.c | 0
> drivers/video/{ => fbdev}/i810/Makefile | 0
> drivers/video/{ => fbdev}/i810/i810-i2c.c | 0
> drivers/video/{ => fbdev}/i810/i810.h | 0
> drivers/video/{ => fbdev}/i810/i810_accel.c | 0
> drivers/video/{ => fbdev}/i810/i810_dvt.c | 0
> drivers/video/{ => fbdev}/i810/i810_gtf.c | 0
> drivers/video/{ => fbdev}/i810/i810_main.c | 0
> drivers/video/{ => fbdev}/i810/i810_main.h | 0
> drivers/video/{ => fbdev}/i810/i810_regs.h | 0
> drivers/video/{ => fbdev}/igafb.c | 0
> drivers/video/{ => fbdev}/imsttfb.c | 0
> drivers/video/{ => fbdev}/imxfb.c | 0
> drivers/video/{ => fbdev}/intelfb/Makefile | 0
> drivers/video/{ => fbdev}/intelfb/intelfb.h | 0
> drivers/video/{ => fbdev}/intelfb/intelfb_i2c.c | 0
> drivers/video/{ => fbdev}/intelfb/intelfbdrv.c | 0
> drivers/video/{ => fbdev}/intelfb/intelfbhw.c | 0
> drivers/video/{ => fbdev}/intelfb/intelfbhw.h | 0
> drivers/video/{ => fbdev}/jz4740_fb.c | 0
> drivers/video/{ => fbdev}/kyro/Makefile | 0
> drivers/video/{ => fbdev}/kyro/STG4000InitDevice.c | 0
> drivers/video/{ => fbdev}/kyro/STG4000Interface.h | 0
> .../video/{ => fbdev}/kyro/STG4000OverlayDevice.c | 0
> drivers/video/{ => fbdev}/kyro/STG4000Ramdac.c | 0
> drivers/video/{ => fbdev}/kyro/STG4000Reg.h | 0
> drivers/video/{ => fbdev}/kyro/STG4000VTG.c | 0
> drivers/video/{ => fbdev}/kyro/fbdev.c | 0
> drivers/video/{ => fbdev}/leo.c | 0
> drivers/video/{ => fbdev}/macfb.c | 0
> drivers/video/{ => fbdev}/macmodes.c | 0
> drivers/video/{ => fbdev}/macmodes.h | 0
> drivers/video/{ => fbdev}/matrox/Makefile | 0
> drivers/video/{ => fbdev}/matrox/g450_pll.c | 0
> drivers/video/{ => fbdev}/matrox/g450_pll.h | 0
> drivers/video/{ => fbdev}/matrox/i2c-matroxfb.c | 0
> .../video/{ => fbdev}/matrox/matroxfb_DAC1064.c | 0
> .../video/{ => fbdev}/matrox/matroxfb_DAC1064.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_Ti3026.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_Ti3026.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_accel.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_accel.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_base.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_base.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_crtc2.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_crtc2.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_g450.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_g450.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_maven.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_maven.h | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_misc.c | 0
> drivers/video/{ => fbdev}/matrox/matroxfb_misc.h | 0
> drivers/video/{ => fbdev}/maxinefb.c | 0
> drivers/video/{ => fbdev}/mb862xx/Makefile | 0
> drivers/video/{ => fbdev}/mb862xx/mb862xx-i2c.c | 0
> drivers/video/{ => fbdev}/mb862xx/mb862xx_reg.h | 0
> drivers/video/{ => fbdev}/mb862xx/mb862xxfb.h | 0
> .../video/{ => fbdev}/mb862xx/mb862xxfb_accel.c | 0
> .../video/{ => fbdev}/mb862xx/mb862xxfb_accel.h | 0
> drivers/video/{ => fbdev}/mb862xx/mb862xxfbdrv.c | 0
> drivers/video/{ => fbdev}/mbx/Makefile | 0
> drivers/video/{ => fbdev}/mbx/mbxdebugfs.c | 0
> drivers/video/{ => fbdev}/mbx/mbxfb.c | 0
> drivers/video/{ => fbdev}/mbx/reg_bits.h | 0
> drivers/video/{ => fbdev}/mbx/regs.h | 0
> drivers/video/{ => fbdev}/metronomefb.c | 0
> drivers/video/{ => fbdev}/mmp/Kconfig | 6 +-
> drivers/video/{ => fbdev}/mmp/Makefile | 0
> drivers/video/{ => fbdev}/mmp/core.c | 0
> drivers/video/{ => fbdev}/mmp/fb/Kconfig | 0
> drivers/video/{ => fbdev}/mmp/fb/Makefile | 0
> drivers/video/{ => fbdev}/mmp/fb/mmpfb.c | 0
> drivers/video/{ => fbdev}/mmp/fb/mmpfb.h | 0
> drivers/video/{ => fbdev}/mmp/hw/Kconfig | 0
> drivers/video/{ => fbdev}/mmp/hw/Makefile | 0
> drivers/video/{ => fbdev}/mmp/hw/mmp_ctrl.c | 0
> drivers/video/{ => fbdev}/mmp/hw/mmp_ctrl.h | 0
> drivers/video/{ => fbdev}/mmp/hw/mmp_spi.c | 0
> drivers/video/{ => fbdev}/mmp/panel/Kconfig | 0
> drivers/video/{ => fbdev}/mmp/panel/Makefile | 0
> .../video/{ => fbdev}/mmp/panel/tpo_tj032md01bw.c | 0
> drivers/video/{ => fbdev}/modedb.c | 0
> drivers/video/{ => fbdev}/msm/Makefile | 0
> drivers/video/{ => fbdev}/msm/mddi.c | 0
> drivers/video/{ => fbdev}/msm/mddi_client_dummy.c | 0
> .../video/{ => fbdev}/msm/mddi_client_nt35399.c | 0
> .../video/{ => fbdev}/msm/mddi_client_toshiba.c | 0
> drivers/video/{ => fbdev}/msm/mddi_hw.h | 0
> drivers/video/{ => fbdev}/msm/mdp.c | 0
> drivers/video/{ => fbdev}/msm/mdp_csc_table.h | 0
> drivers/video/{ => fbdev}/msm/mdp_hw.h | 0
> drivers/video/{ => fbdev}/msm/mdp_ppp.c | 0
> drivers/video/{ => fbdev}/msm/mdp_scale_tables.c | 0
> drivers/video/{ => fbdev}/msm/mdp_scale_tables.h | 0
> drivers/video/{ => fbdev}/msm/msm_fb.c | 0
> drivers/video/{ => fbdev}/mx3fb.c | 0
> drivers/video/{ => fbdev}/mxsfb.c | 0
> drivers/video/{ => fbdev}/n411.c | 0
> drivers/video/{ => fbdev}/neofb.c | 0
> drivers/video/{ => fbdev}/nuc900fb.c | 0
> drivers/video/{ => fbdev}/nuc900fb.h | 0
> drivers/video/{ => fbdev}/nvidia/Makefile | 0
> drivers/video/{ => fbdev}/nvidia/nv_accel.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_backlight.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_dma.h | 0
> drivers/video/{ => fbdev}/nvidia/nv_hw.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_i2c.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_local.h | 0
> drivers/video/{ => fbdev}/nvidia/nv_of.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_proto.h | 0
> drivers/video/{ => fbdev}/nvidia/nv_setup.c | 0
> drivers/video/{ => fbdev}/nvidia/nv_type.h | 0
> drivers/video/{ => fbdev}/nvidia/nvidia.c | 0
> drivers/video/{ => fbdev}/ocfb.c | 0
> drivers/video/{ => fbdev}/offb.c | 0
> drivers/video/{ => fbdev}/omap/Kconfig | 0
> drivers/video/{ => fbdev}/omap/Makefile | 0
> drivers/video/{ => fbdev}/omap/hwa742.c | 0
> drivers/video/{ => fbdev}/omap/lcd_ams_delta.c | 0
> drivers/video/{ => fbdev}/omap/lcd_h3.c | 0
> drivers/video/{ => fbdev}/omap/lcd_htcherald.c | 0
> drivers/video/{ => fbdev}/omap/lcd_inn1510.c | 0
> drivers/video/{ => fbdev}/omap/lcd_inn1610.c | 0
> drivers/video/{ => fbdev}/omap/lcd_mipid.c | 0
> drivers/video/{ => fbdev}/omap/lcd_osk.c | 0
> drivers/video/{ => fbdev}/omap/lcd_palmte.c | 0
> drivers/video/{ => fbdev}/omap/lcd_palmtt.c | 0
> drivers/video/{ => fbdev}/omap/lcd_palmz71.c | 0
> drivers/video/{ => fbdev}/omap/lcdc.c | 0
> drivers/video/{ => fbdev}/omap/lcdc.h | 0
> drivers/video/{ => fbdev}/omap/omapfb.h | 0
> drivers/video/{ => fbdev}/omap/omapfb_main.c | 0
> drivers/video/{ => fbdev}/omap/sossi.c | 0
> drivers/video/fbdev/omap2/Kconfig | 10 +
> drivers/video/{ => fbdev}/omap2/Makefile | 0
> .../video/{ => fbdev}/omap2/displays-new/Kconfig | 0
> .../video/{ => fbdev}/omap2/displays-new/Makefile | 0
> .../omap2/displays-new/connector-analog-tv.c | 0
> .../{ => fbdev}/omap2/displays-new/connector-dvi.c | 0
> .../omap2/displays-new/connector-hdmi.c | 0
> .../omap2/displays-new/encoder-tfp410.c | 0
> .../omap2/displays-new/encoder-tpd12s015.c | 0
> .../{ => fbdev}/omap2/displays-new/panel-dpi.c | 0
> .../{ => fbdev}/omap2/displays-new/panel-dsi-cm.c | 0
> .../omap2/displays-new/panel-lgphilips-lb035q02.c | 0
> .../omap2/displays-new/panel-nec-nl8048hl11.c | 0
> .../omap2/displays-new/panel-sharp-ls037v7dw01.c | 0
> .../omap2/displays-new/panel-sony-acx565akm.c | 0
> .../omap2/displays-new/panel-tpo-td028ttec1.c | 0
> .../omap2/displays-new/panel-tpo-td043mtea1.c | 0
> drivers/video/{ => fbdev}/omap2/dss/Kconfig | 0
> drivers/video/{ => fbdev}/omap2/dss/Makefile | 0
> drivers/video/{ => fbdev}/omap2/dss/apply.c | 0
> drivers/video/{ => fbdev}/omap2/dss/core.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dispc-compat.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dispc-compat.h | 0
> drivers/video/{ => fbdev}/omap2/dss/dispc.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dispc.h | 0
> drivers/video/{ => fbdev}/omap2/dss/dispc_coefs.c | 0
> .../video/{ => fbdev}/omap2/dss/display-sysfs.c | 0
> drivers/video/{ => fbdev}/omap2/dss/display.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dpi.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dsi.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dss.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dss.h | 0
> drivers/video/{ => fbdev}/omap2/dss/dss_features.c | 0
> drivers/video/{ => fbdev}/omap2/dss/dss_features.h | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi.h | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi4.c | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi4_core.c | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi4_core.h | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi_common.c | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi_phy.c | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi_pll.c | 0
> drivers/video/{ => fbdev}/omap2/dss/hdmi_wp.c | 0
> .../video/{ => fbdev}/omap2/dss/manager-sysfs.c | 0
> drivers/video/{ => fbdev}/omap2/dss/manager.c | 0
> drivers/video/{ => fbdev}/omap2/dss/output.c | 0
> .../video/{ => fbdev}/omap2/dss/overlay-sysfs.c | 0
> drivers/video/{ => fbdev}/omap2/dss/overlay.c | 0
> drivers/video/{ => fbdev}/omap2/dss/rfbi.c | 0
> drivers/video/{ => fbdev}/omap2/dss/sdi.c | 0
> drivers/video/{ => fbdev}/omap2/dss/venc.c | 0
> drivers/video/{ => fbdev}/omap2/dss/venc_panel.c | 0
> drivers/video/{ => fbdev}/omap2/omapfb/Kconfig | 0
> drivers/video/{ => fbdev}/omap2/omapfb/Makefile | 0
> .../video/{ => fbdev}/omap2/omapfb/omapfb-ioctl.c | 0
> .../video/{ => fbdev}/omap2/omapfb/omapfb-main.c | 0
> .../video/{ => fbdev}/omap2/omapfb/omapfb-sysfs.c | 0
> drivers/video/{ => fbdev}/omap2/omapfb/omapfb.h | 0
> drivers/video/{ => fbdev}/omap2/vrfb.c | 0
> drivers/video/{ => fbdev}/p9100.c | 0
> drivers/video/{ => fbdev}/platinumfb.c | 0
> drivers/video/{ => fbdev}/platinumfb.h | 0
> drivers/video/{ => fbdev}/pm2fb.c | 0
> drivers/video/{ => fbdev}/pm3fb.c | 0
> drivers/video/{ => fbdev}/pmag-aa-fb.c | 0
> drivers/video/{ => fbdev}/pmag-ba-fb.c | 0
> drivers/video/{ => fbdev}/pmagb-b-fb.c | 0
> drivers/video/{ => fbdev}/ps3fb.c | 0
> drivers/video/{ => fbdev}/pvr2fb.c | 0
> drivers/video/{ => fbdev}/pxa168fb.c | 0
> drivers/video/{ => fbdev}/pxa168fb.h | 0
> drivers/video/{ => fbdev}/pxa3xx-gcu.c | 0
> drivers/video/{ => fbdev}/pxa3xx-gcu.h | 0
> drivers/video/{ => fbdev}/pxafb.c | 0
> drivers/video/{ => fbdev}/pxafb.h | 0
> drivers/video/{ => fbdev}/q40fb.c | 0
> drivers/video/{ => fbdev}/riva/Makefile | 0
> drivers/video/{ => fbdev}/riva/fbdev.c | 0
> drivers/video/{ => fbdev}/riva/nv_driver.c | 0
> drivers/video/{ => fbdev}/riva/nv_type.h | 0
> drivers/video/{ => fbdev}/riva/nvreg.h | 0
> drivers/video/{ => fbdev}/riva/riva_hw.c | 0
> drivers/video/{ => fbdev}/riva/riva_hw.h | 0
> drivers/video/{ => fbdev}/riva/riva_tbl.h | 0
> drivers/video/{ => fbdev}/riva/rivafb-i2c.c | 0
> drivers/video/{ => fbdev}/riva/rivafb.h | 0
> drivers/video/{ => fbdev}/s1d13xxxfb.c | 0
> drivers/video/{ => fbdev}/s3c-fb.c | 0
> drivers/video/{ => fbdev}/s3c2410fb.c | 0
> drivers/video/{ => fbdev}/s3c2410fb.h | 0
> drivers/video/{ => fbdev}/s3fb.c | 0
> drivers/video/{ => fbdev}/sa1100fb.c | 0
> drivers/video/{ => fbdev}/sa1100fb.h | 0
> drivers/video/{ => fbdev}/savage/Makefile | 0
> drivers/video/{ => fbdev}/savage/savagefb-i2c.c | 0
> drivers/video/{ => fbdev}/savage/savagefb.h | 0
> drivers/video/{ => fbdev}/savage/savagefb_accel.c | 0
> drivers/video/{ => fbdev}/savage/savagefb_driver.c | 0
> drivers/video/{ => fbdev}/sbuslib.c | 0
> drivers/video/{ => fbdev}/sbuslib.h | 0
> drivers/video/{ => fbdev}/sgivwfb.c | 0
> drivers/video/{ => fbdev}/sh7760fb.c | 0
> drivers/video/{ => fbdev}/sh_mipi_dsi.c | 0
> drivers/video/{ => fbdev}/sh_mobile_hdmi.c | 0
> drivers/video/{ => fbdev}/sh_mobile_lcdcfb.c | 0
> drivers/video/{ => fbdev}/sh_mobile_lcdcfb.h | 0
> drivers/video/{ => fbdev}/sh_mobile_meram.c | 0
> drivers/video/{ => fbdev}/simplefb.c | 0
> drivers/video/{ => fbdev}/sis/300vtbl.h | 0
> drivers/video/{ => fbdev}/sis/310vtbl.h | 0
> drivers/video/{ => fbdev}/sis/Makefile | 0
> drivers/video/{ => fbdev}/sis/init.c | 0
> drivers/video/{ => fbdev}/sis/init.h | 0
> drivers/video/{ => fbdev}/sis/init301.c | 0
> drivers/video/{ => fbdev}/sis/init301.h | 0
> drivers/video/{ => fbdev}/sis/initdef.h | 0
> drivers/video/{ => fbdev}/sis/initextlfb.c | 0
> drivers/video/{ => fbdev}/sis/oem300.h | 0
> drivers/video/{ => fbdev}/sis/oem310.h | 0
> drivers/video/{ => fbdev}/sis/sis.h | 0
> drivers/video/{ => fbdev}/sis/sis_accel.c | 0
> drivers/video/{ => fbdev}/sis/sis_accel.h | 0
> drivers/video/{ => fbdev}/sis/sis_main.c | 0
> drivers/video/{ => fbdev}/sis/sis_main.h | 0
> drivers/video/{ => fbdev}/sis/vgatypes.h | 0
> drivers/video/{ => fbdev}/sis/vstruct.h | 0
> drivers/video/{ => fbdev}/skeletonfb.c | 0
> drivers/video/{ => fbdev}/sm501fb.c | 0
> drivers/video/{ => fbdev}/smscufx.c | 0
> drivers/video/{ => fbdev}/ssd1307fb.c | 0
> drivers/video/{ => fbdev}/sstfb.c | 0
> drivers/video/{ => fbdev}/sticore.h | 0
> drivers/video/{ => fbdev}/stifb.c | 0
> drivers/video/{ => fbdev}/sunxvr1000.c | 0
> drivers/video/{ => fbdev}/sunxvr2500.c | 0
> drivers/video/{ => fbdev}/sunxvr500.c | 0
> drivers/video/{ => fbdev}/svgalib.c | 0
> drivers/video/{ => fbdev}/syscopyarea.c | 0
> drivers/video/{ => fbdev}/sysfillrect.c | 0
> drivers/video/{ => fbdev}/sysimgblt.c | 0
> drivers/video/{ => fbdev}/tcx.c | 0
> drivers/video/{ => fbdev}/tdfxfb.c | 0
> drivers/video/{ => fbdev}/tgafb.c | 0
> drivers/video/{ => fbdev}/tmiofb.c | 0
> drivers/video/{ => fbdev}/tridentfb.c | 0
> drivers/video/{ => fbdev}/udlfb.c | 0
> drivers/video/{ => fbdev}/uvesafb.c | 0
> drivers/video/{ => fbdev}/valkyriefb.c | 0
> drivers/video/{ => fbdev}/valkyriefb.h | 0
> drivers/video/{ => fbdev}/vermilion/Makefile | 0
> drivers/video/{ => fbdev}/vermilion/cr_pll.c | 0
> drivers/video/{ => fbdev}/vermilion/vermilion.c | 0
> drivers/video/{ => fbdev}/vermilion/vermilion.h | 0
> drivers/video/{ => fbdev}/vesafb.c | 0
> drivers/video/{ => fbdev}/vfb.c | 0
> drivers/video/{ => fbdev}/vga16fb.c | 0
> drivers/video/{ => fbdev}/via/Makefile | 0
> drivers/video/{ => fbdev}/via/accel.c | 0
> drivers/video/{ => fbdev}/via/accel.h | 0
> drivers/video/{ => fbdev}/via/chip.h | 0
> drivers/video/{ => fbdev}/via/debug.h | 0
> drivers/video/{ => fbdev}/via/dvi.c | 0
> drivers/video/{ => fbdev}/via/dvi.h | 0
> drivers/video/{ => fbdev}/via/global.c | 0
> drivers/video/{ => fbdev}/via/global.h | 0
> drivers/video/{ => fbdev}/via/hw.c | 0
> drivers/video/{ => fbdev}/via/hw.h | 0
> drivers/video/{ => fbdev}/via/ioctl.c | 0
> drivers/video/{ => fbdev}/via/ioctl.h | 0
> drivers/video/{ => fbdev}/via/lcd.c | 0
> drivers/video/{ => fbdev}/via/lcd.h | 0
> drivers/video/{ => fbdev}/via/share.h | 0
> drivers/video/{ => fbdev}/via/tblDPASetting.c | 0
> drivers/video/{ => fbdev}/via/tblDPASetting.h | 0
> drivers/video/{ => fbdev}/via/via-core.c | 0
> drivers/video/{ => fbdev}/via/via-gpio.c | 0
> drivers/video/{ => fbdev}/via/via_aux.c | 0
> drivers/video/{ => fbdev}/via/via_aux.h | 0
> drivers/video/{ => fbdev}/via/via_aux_ch7301.c | 0
> drivers/video/{ => fbdev}/via/via_aux_edid.c | 0
> drivers/video/{ => fbdev}/via/via_aux_sii164.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1621.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1622.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1625.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1631.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1632.c | 0
> drivers/video/{ => fbdev}/via/via_aux_vt1636.c | 0
> drivers/video/{ => fbdev}/via/via_clock.c | 0
> drivers/video/{ => fbdev}/via/via_clock.h | 0
> drivers/video/{ => fbdev}/via/via_i2c.c | 0
> drivers/video/{ => fbdev}/via/via_modesetting.c | 0
> drivers/video/{ => fbdev}/via/via_modesetting.h | 0
> drivers/video/{ => fbdev}/via/via_utility.c | 0
> drivers/video/{ => fbdev}/via/via_utility.h | 0
> drivers/video/{ => fbdev}/via/viafbdev.c | 0
> drivers/video/{ => fbdev}/via/viafbdev.h | 0
> drivers/video/{ => fbdev}/via/viamode.c | 0
> drivers/video/{ => fbdev}/via/viamode.h | 0
> drivers/video/{ => fbdev}/via/vt1636.c | 0
> drivers/video/{ => fbdev}/via/vt1636.h | 0
> drivers/video/{ => fbdev}/vt8500lcdfb.c | 0
> drivers/video/{ => fbdev}/vt8500lcdfb.h | 0
> drivers/video/{ => fbdev}/vt8623fb.c | 0
> drivers/video/{ => fbdev}/w100fb.c | 0
> drivers/video/{ => fbdev}/w100fb.h | 0
> drivers/video/{ => fbdev}/wm8505fb.c | 0
> drivers/video/{ => fbdev}/wm8505fb_regs.h | 0
> drivers/video/{ => fbdev}/wmt_ge_rops.c | 0
> drivers/video/{ => fbdev}/wmt_ge_rops.h | 0
> drivers/video/{ => fbdev}/xen-fbfront.c | 0
> drivers/video/{ => fbdev}/xilinxfb.c | 0
> drivers/video/omap2/Kconfig | 10 -
> 479 files changed, 2670 insertions(+), 2659 deletions(-)
> rename drivers/video/{ => fbdev}/68328fb.c (100%)
> create mode 100644 drivers/video/fbdev/Kconfig
> create mode 100644 drivers/video/fbdev/Makefile
> rename drivers/video/{ => fbdev}/acornfb.c (100%)
> rename drivers/video/{ => fbdev}/acornfb.h (100%)
> rename drivers/video/{ => fbdev}/amba-clcd.c (100%)
> rename drivers/video/{ => fbdev}/amifb.c (100%)
> rename drivers/video/{ => fbdev}/arcfb.c (100%)
> rename drivers/video/{ => fbdev}/arkfb.c (100%)
> rename drivers/video/{ => fbdev}/asiliantfb.c (100%)
> rename drivers/video/{ => fbdev}/atafb.c (100%)
> rename drivers/video/{ => fbdev}/atafb.h (100%)
> rename drivers/video/{ => fbdev}/atafb_iplan2p2.c (100%)
> rename drivers/video/{ => fbdev}/atafb_iplan2p4.c (100%)
> rename drivers/video/{ => fbdev}/atafb_iplan2p8.c (100%)
> rename drivers/video/{ => fbdev}/atafb_mfb.c (100%)
> rename drivers/video/{ => fbdev}/atafb_utils.h (100%)
> rename drivers/video/{ => fbdev}/atmel_lcdfb.c (100%)
> rename drivers/video/{ => fbdev}/aty/Makefile (100%)
> rename drivers/video/{ => fbdev}/aty/ati_ids.h (100%)
> rename drivers/video/{ => fbdev}/aty/aty128fb.c (100%)
> rename drivers/video/{ => fbdev}/aty/atyfb.h (100%)
> rename drivers/video/{ => fbdev}/aty/atyfb_base.c (100%)
> rename drivers/video/{ => fbdev}/aty/mach64_accel.c (100%)
> rename drivers/video/{ => fbdev}/aty/mach64_ct.c (100%)
> rename drivers/video/{ => fbdev}/aty/mach64_cursor.c (100%)
> rename drivers/video/{ => fbdev}/aty/mach64_gx.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_accel.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_backlight.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_base.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_i2c.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_monitor.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeon_pm.c (100%)
> rename drivers/video/{ => fbdev}/aty/radeonfb.h (100%)
> rename drivers/video/{ => fbdev}/au1100fb.c (100%)
> rename drivers/video/{ => fbdev}/au1100fb.h (100%)
> rename drivers/video/{ => fbdev}/au1200fb.c (100%)
> rename drivers/video/{ => fbdev}/au1200fb.h (100%)
> rename drivers/video/{ => fbdev}/auo_k1900fb.c (100%)
> rename drivers/video/{ => fbdev}/auo_k1901fb.c (100%)
> rename drivers/video/{ => fbdev}/auo_k190x.c (100%)
> rename drivers/video/{ => fbdev}/auo_k190x.h (100%)
> rename drivers/video/{ => fbdev}/bf537-lq035.c (100%)
> rename drivers/video/{ => fbdev}/bf54x-lq043fb.c (100%)
> rename drivers/video/{ => fbdev}/bfin-lq035q1-fb.c (100%)
> rename drivers/video/{ => fbdev}/bfin-t350mcqb-fb.c (100%)
> rename drivers/video/{ => fbdev}/bfin_adv7393fb.c (100%)
> rename drivers/video/{ => fbdev}/bfin_adv7393fb.h (100%)
> rename drivers/video/{ => fbdev}/broadsheetfb.c (100%)
> rename drivers/video/{ => fbdev}/bt431.h (100%)
> rename drivers/video/{ => fbdev}/bt455.h (100%)
> rename drivers/video/{ => fbdev}/bw2.c (100%)
> rename drivers/video/{ => fbdev}/c2p.h (100%)
> rename drivers/video/{ => fbdev}/c2p_core.h (100%)
> rename drivers/video/{ => fbdev}/c2p_iplan2.c (100%)
> rename drivers/video/{ => fbdev}/c2p_planar.c (100%)
> rename drivers/video/{ => fbdev}/carminefb.c (100%)
> rename drivers/video/{ => fbdev}/carminefb.h (100%)
> rename drivers/video/{ => fbdev}/carminefb_regs.h (100%)
> rename drivers/video/{ => fbdev}/cfbcopyarea.c (100%)
> rename drivers/video/{ => fbdev}/cfbfillrect.c (100%)
> rename drivers/video/{ => fbdev}/cfbimgblt.c (100%)
> rename drivers/video/{ => fbdev}/cg14.c (100%)
> rename drivers/video/{ => fbdev}/cg3.c (100%)
> rename drivers/video/{ => fbdev}/cg6.c (100%)
> rename drivers/video/{ => fbdev}/chipsfb.c (100%)
> rename drivers/video/{ => fbdev}/cirrusfb.c (100%)
> rename drivers/video/{ => fbdev}/clps711xfb.c (100%)
> rename drivers/video/{ => fbdev}/cobalt_lcdfb.c (100%)
> rename drivers/video/{ => fbdev}/controlfb.c (100%)
> rename drivers/video/{ => fbdev}/controlfb.h (100%)
> rename drivers/video/{ => fbdev}/cyber2000fb.c (100%)
> rename drivers/video/{ => fbdev}/cyber2000fb.h (100%)
> rename drivers/video/{ => fbdev}/da8xx-fb.c (100%)
> rename drivers/video/{ => fbdev}/dnfb.c (100%)
> rename drivers/video/{ => fbdev}/edid.h (100%)
> rename drivers/video/{ => fbdev}/efifb.c (100%)
> rename drivers/video/{ => fbdev}/ep93xx-fb.c (100%)
> rename drivers/video/{ => fbdev}/exynos/Kconfig (100%)
> rename drivers/video/{ => fbdev}/exynos/Makefile (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_dp_core.c (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_dp_core.h (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_dp_reg.c (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_dp_reg.h (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi.c (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi_common.c (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi_common.h (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi_lowlevel.c (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi_lowlevel.h (100%)
> rename drivers/video/{ => fbdev}/exynos/exynos_mipi_dsi_regs.h (100%)
> rename drivers/video/{ => fbdev}/exynos/s6e8ax0.c (100%)
> rename drivers/video/{ => fbdev}/fb-puv3.c (100%)
> rename drivers/video/{ => fbdev}/fb_ddc.c (100%)
> rename drivers/video/{ => fbdev}/fb_defio.c (100%)
> rename drivers/video/{ => fbdev}/fb_draw.h (100%)
> rename drivers/video/{ => fbdev}/fb_notify.c (100%)
> rename drivers/video/{ => fbdev}/fb_sys_fops.c (100%)
> rename drivers/video/{ => fbdev}/fbcmap.c (100%)
> rename drivers/video/{ => fbdev}/fbcvt.c (100%)
> rename drivers/video/{ => fbdev}/fbmem.c (100%)
> rename drivers/video/{ => fbdev}/fbmon.c (100%)
> rename drivers/video/{ => fbdev}/fbsysfs.c (100%)
> rename drivers/video/{ => fbdev}/ffb.c (100%)
> rename drivers/video/{ => fbdev}/fm2fb.c (100%)
> rename drivers/video/{ => fbdev}/fsl-diu-fb.c (100%)
> rename drivers/video/{ => fbdev}/g364fb.c (100%)
> rename drivers/video/{ => fbdev}/gbefb.c (100%)
> rename drivers/video/{ => fbdev}/geode/Kconfig (100%)
> rename drivers/video/{ => fbdev}/geode/Makefile (100%)
> rename drivers/video/{ => fbdev}/geode/display_gx.c (100%)
> rename drivers/video/{ => fbdev}/geode/display_gx1.c (100%)
> rename drivers/video/{ => fbdev}/geode/display_gx1.h (100%)
> rename drivers/video/{ => fbdev}/geode/geodefb.h (100%)
> rename drivers/video/{ => fbdev}/geode/gx1fb_core.c (100%)
> rename drivers/video/{ => fbdev}/geode/gxfb.h (100%)
> rename drivers/video/{ => fbdev}/geode/gxfb_core.c (100%)
> rename drivers/video/{ => fbdev}/geode/lxfb.h (100%)
> rename drivers/video/{ => fbdev}/geode/lxfb_core.c (100%)
> rename drivers/video/{ => fbdev}/geode/lxfb_ops.c (100%)
> rename drivers/video/{ => fbdev}/geode/suspend_gx.c (100%)
> rename drivers/video/{ => fbdev}/geode/video_cs5530.c (100%)
> rename drivers/video/{ => fbdev}/geode/video_cs5530.h (100%)
> rename drivers/video/{ => fbdev}/geode/video_gx.c (100%)
> rename drivers/video/{ => fbdev}/goldfishfb.c (100%)
> rename drivers/video/{ => fbdev}/grvga.c (100%)
> rename drivers/video/{ => fbdev}/gxt4500.c (100%)
> rename drivers/video/{ => fbdev}/hecubafb.c (100%)
> rename drivers/video/{ => fbdev}/hgafb.c (100%)
> rename drivers/video/{ => fbdev}/hitfb.c (100%)
> rename drivers/video/{ => fbdev}/hpfb.c (100%)
> rename drivers/video/{ => fbdev}/hyperv_fb.c (100%)
> rename drivers/video/{ => fbdev}/i740_reg.h (100%)
> rename drivers/video/{ => fbdev}/i740fb.c (100%)
> rename drivers/video/{ => fbdev}/i810/Makefile (100%)
> rename drivers/video/{ => fbdev}/i810/i810-i2c.c (100%)
> rename drivers/video/{ => fbdev}/i810/i810.h (100%)
> rename drivers/video/{ => fbdev}/i810/i810_accel.c (100%)
> rename drivers/video/{ => fbdev}/i810/i810_dvt.c (100%)
> rename drivers/video/{ => fbdev}/i810/i810_gtf.c (100%)
> rename drivers/video/{ => fbdev}/i810/i810_main.c (100%)
> rename drivers/video/{ => fbdev}/i810/i810_main.h (100%)
> rename drivers/video/{ => fbdev}/i810/i810_regs.h (100%)
> rename drivers/video/{ => fbdev}/igafb.c (100%)
> rename drivers/video/{ => fbdev}/imsttfb.c (100%)
> rename drivers/video/{ => fbdev}/imxfb.c (100%)
> rename drivers/video/{ => fbdev}/intelfb/Makefile (100%)
> rename drivers/video/{ => fbdev}/intelfb/intelfb.h (100%)
> rename drivers/video/{ => fbdev}/intelfb/intelfb_i2c.c (100%)
> rename drivers/video/{ => fbdev}/intelfb/intelfbdrv.c (100%)
> rename drivers/video/{ => fbdev}/intelfb/intelfbhw.c (100%)
> rename drivers/video/{ => fbdev}/intelfb/intelfbhw.h (100%)
> rename drivers/video/{ => fbdev}/jz4740_fb.c (100%)
> rename drivers/video/{ => fbdev}/kyro/Makefile (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000InitDevice.c (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000Interface.h (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000OverlayDevice.c (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000Ramdac.c (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000Reg.h (100%)
> rename drivers/video/{ => fbdev}/kyro/STG4000VTG.c (100%)
> rename drivers/video/{ => fbdev}/kyro/fbdev.c (100%)
> rename drivers/video/{ => fbdev}/leo.c (100%)
> rename drivers/video/{ => fbdev}/macfb.c (100%)
> rename drivers/video/{ => fbdev}/macmodes.c (100%)
> rename drivers/video/{ => fbdev}/macmodes.h (100%)
> rename drivers/video/{ => fbdev}/matrox/Makefile (100%)
> rename drivers/video/{ => fbdev}/matrox/g450_pll.c (100%)
> rename drivers/video/{ => fbdev}/matrox/g450_pll.h (100%)
> rename drivers/video/{ => fbdev}/matrox/i2c-matroxfb.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_DAC1064.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_DAC1064.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_Ti3026.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_Ti3026.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_accel.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_accel.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_base.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_base.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_crtc2.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_crtc2.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_g450.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_g450.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_maven.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_maven.h (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_misc.c (100%)
> rename drivers/video/{ => fbdev}/matrox/matroxfb_misc.h (100%)
> rename drivers/video/{ => fbdev}/maxinefb.c (100%)
> rename drivers/video/{ => fbdev}/mb862xx/Makefile (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xx-i2c.c (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xx_reg.h (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xxfb.h (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xxfb_accel.c (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xxfb_accel.h (100%)
> rename drivers/video/{ => fbdev}/mb862xx/mb862xxfbdrv.c (100%)
> rename drivers/video/{ => fbdev}/mbx/Makefile (100%)
> rename drivers/video/{ => fbdev}/mbx/mbxdebugfs.c (100%)
> rename drivers/video/{ => fbdev}/mbx/mbxfb.c (100%)
> rename drivers/video/{ => fbdev}/mbx/reg_bits.h (100%)
> rename drivers/video/{ => fbdev}/mbx/regs.h (100%)
> rename drivers/video/{ => fbdev}/metronomefb.c (100%)
> rename drivers/video/{ => fbdev}/mmp/Kconfig (61%)
> rename drivers/video/{ => fbdev}/mmp/Makefile (100%)
> rename drivers/video/{ => fbdev}/mmp/core.c (100%)
> rename drivers/video/{ => fbdev}/mmp/fb/Kconfig (100%)
> rename drivers/video/{ => fbdev}/mmp/fb/Makefile (100%)
> rename drivers/video/{ => fbdev}/mmp/fb/mmpfb.c (100%)
> rename drivers/video/{ => fbdev}/mmp/fb/mmpfb.h (100%)
> rename drivers/video/{ => fbdev}/mmp/hw/Kconfig (100%)
> rename drivers/video/{ => fbdev}/mmp/hw/Makefile (100%)
> rename drivers/video/{ => fbdev}/mmp/hw/mmp_ctrl.c (100%)
> rename drivers/video/{ => fbdev}/mmp/hw/mmp_ctrl.h (100%)
> rename drivers/video/{ => fbdev}/mmp/hw/mmp_spi.c (100%)
> rename drivers/video/{ => fbdev}/mmp/panel/Kconfig (100%)
> rename drivers/video/{ => fbdev}/mmp/panel/Makefile (100%)
> rename drivers/video/{ => fbdev}/mmp/panel/tpo_tj032md01bw.c (100%)
> rename drivers/video/{ => fbdev}/modedb.c (100%)
> rename drivers/video/{ => fbdev}/msm/Makefile (100%)
> rename drivers/video/{ => fbdev}/msm/mddi.c (100%)
> rename drivers/video/{ => fbdev}/msm/mddi_client_dummy.c (100%)
> rename drivers/video/{ => fbdev}/msm/mddi_client_nt35399.c (100%)
> rename drivers/video/{ => fbdev}/msm/mddi_client_toshiba.c (100%)
> rename drivers/video/{ => fbdev}/msm/mddi_hw.h (100%)
> rename drivers/video/{ => fbdev}/msm/mdp.c (100%)
> rename drivers/video/{ => fbdev}/msm/mdp_csc_table.h (100%)
> rename drivers/video/{ => fbdev}/msm/mdp_hw.h (100%)
> rename drivers/video/{ => fbdev}/msm/mdp_ppp.c (100%)
> rename drivers/video/{ => fbdev}/msm/mdp_scale_tables.c (100%)
> rename drivers/video/{ => fbdev}/msm/mdp_scale_tables.h (100%)
> rename drivers/video/{ => fbdev}/msm/msm_fb.c (100%)
> rename drivers/video/{ => fbdev}/mx3fb.c (100%)
> rename drivers/video/{ => fbdev}/mxsfb.c (100%)
> rename drivers/video/{ => fbdev}/n411.c (100%)
> rename drivers/video/{ => fbdev}/neofb.c (100%)
> rename drivers/video/{ => fbdev}/nuc900fb.c (100%)
> rename drivers/video/{ => fbdev}/nuc900fb.h (100%)
> rename drivers/video/{ => fbdev}/nvidia/Makefile (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_accel.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_backlight.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_dma.h (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_hw.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_i2c.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_local.h (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_of.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_proto.h (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_setup.c (100%)
> rename drivers/video/{ => fbdev}/nvidia/nv_type.h (100%)
> rename drivers/video/{ => fbdev}/nvidia/nvidia.c (100%)
> rename drivers/video/{ => fbdev}/ocfb.c (100%)
> rename drivers/video/{ => fbdev}/offb.c (100%)
> rename drivers/video/{ => fbdev}/omap/Kconfig (100%)
> rename drivers/video/{ => fbdev}/omap/Makefile (100%)
> rename drivers/video/{ => fbdev}/omap/hwa742.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_ams_delta.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_h3.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_htcherald.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_inn1510.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_inn1610.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_mipid.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_osk.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_palmte.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_palmtt.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcd_palmz71.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcdc.c (100%)
> rename drivers/video/{ => fbdev}/omap/lcdc.h (100%)
> rename drivers/video/{ => fbdev}/omap/omapfb.h (100%)
> rename drivers/video/{ => fbdev}/omap/omapfb_main.c (100%)
> rename drivers/video/{ => fbdev}/omap/sossi.c (100%)
> create mode 100644 drivers/video/fbdev/omap2/Kconfig
> rename drivers/video/{ => fbdev}/omap2/Makefile (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/Kconfig (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/Makefile (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/connector-analog-tv.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/connector-dvi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/connector-hdmi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/encoder-tfp410.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/encoder-tpd12s015.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-dpi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-dsi-cm.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-lgphilips-lb035q02.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-nec-nl8048hl11.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-sharp-ls037v7dw01.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-sony-acx565akm.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-tpo-td028ttec1.c (100%)
> rename drivers/video/{ => fbdev}/omap2/displays-new/panel-tpo-td043mtea1.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/Kconfig (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/Makefile (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/apply.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/core.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dispc-compat.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dispc-compat.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dispc.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dispc.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dispc_coefs.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/display-sysfs.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/display.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dpi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dsi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dss.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dss.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dss_features.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/dss_features.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi4.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi4_core.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi4_core.h (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi_common.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi_phy.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi_pll.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/hdmi_wp.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/manager-sysfs.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/manager.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/output.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/overlay-sysfs.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/overlay.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/rfbi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/sdi.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/venc.c (100%)
> rename drivers/video/{ => fbdev}/omap2/dss/venc_panel.c (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/Kconfig (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/Makefile (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/omapfb-ioctl.c (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/omapfb-main.c (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/omapfb-sysfs.c (100%)
> rename drivers/video/{ => fbdev}/omap2/omapfb/omapfb.h (100%)
> rename drivers/video/{ => fbdev}/omap2/vrfb.c (100%)
> rename drivers/video/{ => fbdev}/p9100.c (100%)
> rename drivers/video/{ => fbdev}/platinumfb.c (100%)
> rename drivers/video/{ => fbdev}/platinumfb.h (100%)
> rename drivers/video/{ => fbdev}/pm2fb.c (100%)
> rename drivers/video/{ => fbdev}/pm3fb.c (100%)
> rename drivers/video/{ => fbdev}/pmag-aa-fb.c (100%)
> rename drivers/video/{ => fbdev}/pmag-ba-fb.c (100%)
> rename drivers/video/{ => fbdev}/pmagb-b-fb.c (100%)
> rename drivers/video/{ => fbdev}/ps3fb.c (100%)
> rename drivers/video/{ => fbdev}/pvr2fb.c (100%)
> rename drivers/video/{ => fbdev}/pxa168fb.c (100%)
> rename drivers/video/{ => fbdev}/pxa168fb.h (100%)
> rename drivers/video/{ => fbdev}/pxa3xx-gcu.c (100%)
> rename drivers/video/{ => fbdev}/pxa3xx-gcu.h (100%)
> rename drivers/video/{ => fbdev}/pxafb.c (100%)
> rename drivers/video/{ => fbdev}/pxafb.h (100%)
> rename drivers/video/{ => fbdev}/q40fb.c (100%)
> rename drivers/video/{ => fbdev}/riva/Makefile (100%)
> rename drivers/video/{ => fbdev}/riva/fbdev.c (100%)
> rename drivers/video/{ => fbdev}/riva/nv_driver.c (100%)
> rename drivers/video/{ => fbdev}/riva/nv_type.h (100%)
> rename drivers/video/{ => fbdev}/riva/nvreg.h (100%)
> rename drivers/video/{ => fbdev}/riva/riva_hw.c (100%)
> rename drivers/video/{ => fbdev}/riva/riva_hw.h (100%)
> rename drivers/video/{ => fbdev}/riva/riva_tbl.h (100%)
> rename drivers/video/{ => fbdev}/riva/rivafb-i2c.c (100%)
> rename drivers/video/{ => fbdev}/riva/rivafb.h (100%)
> rename drivers/video/{ => fbdev}/s1d13xxxfb.c (100%)
> rename drivers/video/{ => fbdev}/s3c-fb.c (100%)
> rename drivers/video/{ => fbdev}/s3c2410fb.c (100%)
> rename drivers/video/{ => fbdev}/s3c2410fb.h (100%)
> rename drivers/video/{ => fbdev}/s3fb.c (100%)
> rename drivers/video/{ => fbdev}/sa1100fb.c (100%)
> rename drivers/video/{ => fbdev}/sa1100fb.h (100%)
> rename drivers/video/{ => fbdev}/savage/Makefile (100%)
> rename drivers/video/{ => fbdev}/savage/savagefb-i2c.c (100%)
> rename drivers/video/{ => fbdev}/savage/savagefb.h (100%)
> rename drivers/video/{ => fbdev}/savage/savagefb_accel.c (100%)
> rename drivers/video/{ => fbdev}/savage/savagefb_driver.c (100%)
> rename drivers/video/{ => fbdev}/sbuslib.c (100%)
> rename drivers/video/{ => fbdev}/sbuslib.h (100%)
> rename drivers/video/{ => fbdev}/sgivwfb.c (100%)
> rename drivers/video/{ => fbdev}/sh7760fb.c (100%)
> rename drivers/video/{ => fbdev}/sh_mipi_dsi.c (100%)
> rename drivers/video/{ => fbdev}/sh_mobile_hdmi.c (100%)
> rename drivers/video/{ => fbdev}/sh_mobile_lcdcfb.c (100%)
> rename drivers/video/{ => fbdev}/sh_mobile_lcdcfb.h (100%)
> rename drivers/video/{ => fbdev}/sh_mobile_meram.c (100%)
> rename drivers/video/{ => fbdev}/simplefb.c (100%)
> rename drivers/video/{ => fbdev}/sis/300vtbl.h (100%)
> rename drivers/video/{ => fbdev}/sis/310vtbl.h (100%)
> rename drivers/video/{ => fbdev}/sis/Makefile (100%)
> rename drivers/video/{ => fbdev}/sis/init.c (100%)
> rename drivers/video/{ => fbdev}/sis/init.h (100%)
> rename drivers/video/{ => fbdev}/sis/init301.c (100%)
> rename drivers/video/{ => fbdev}/sis/init301.h (100%)
> rename drivers/video/{ => fbdev}/sis/initdef.h (100%)
> rename drivers/video/{ => fbdev}/sis/initextlfb.c (100%)
> rename drivers/video/{ => fbdev}/sis/oem300.h (100%)
> rename drivers/video/{ => fbdev}/sis/oem310.h (100%)
> rename drivers/video/{ => fbdev}/sis/sis.h (100%)
> rename drivers/video/{ => fbdev}/sis/sis_accel.c (100%)
> rename drivers/video/{ => fbdev}/sis/sis_accel.h (100%)
> rename drivers/video/{ => fbdev}/sis/sis_main.c (100%)
> rename drivers/video/{ => fbdev}/sis/sis_main.h (100%)
> rename drivers/video/{ => fbdev}/sis/vgatypes.h (100%)
> rename drivers/video/{ => fbdev}/sis/vstruct.h (100%)
> rename drivers/video/{ => fbdev}/skeletonfb.c (100%)
> rename drivers/video/{ => fbdev}/sm501fb.c (100%)
> rename drivers/video/{ => fbdev}/smscufx.c (100%)
> rename drivers/video/{ => fbdev}/ssd1307fb.c (100%)
> rename drivers/video/{ => fbdev}/sstfb.c (100%)
> rename drivers/video/{ => fbdev}/sticore.h (100%)
> rename drivers/video/{ => fbdev}/stifb.c (100%)
> rename drivers/video/{ => fbdev}/sunxvr1000.c (100%)
> rename drivers/video/{ => fbdev}/sunxvr2500.c (100%)
> rename drivers/video/{ => fbdev}/sunxvr500.c (100%)
> rename drivers/video/{ => fbdev}/svgalib.c (100%)
> rename drivers/video/{ => fbdev}/syscopyarea.c (100%)
> rename drivers/video/{ => fbdev}/sysfillrect.c (100%)
> rename drivers/video/{ => fbdev}/sysimgblt.c (100%)
> rename drivers/video/{ => fbdev}/tcx.c (100%)
> rename drivers/video/{ => fbdev}/tdfxfb.c (100%)
> rename drivers/video/{ => fbdev}/tgafb.c (100%)
> rename drivers/video/{ => fbdev}/tmiofb.c (100%)
> rename drivers/video/{ => fbdev}/tridentfb.c (100%)
> rename drivers/video/{ => fbdev}/udlfb.c (100%)
> rename drivers/video/{ => fbdev}/uvesafb.c (100%)
> rename drivers/video/{ => fbdev}/valkyriefb.c (100%)
> rename drivers/video/{ => fbdev}/valkyriefb.h (100%)
> rename drivers/video/{ => fbdev}/vermilion/Makefile (100%)
> rename drivers/video/{ => fbdev}/vermilion/cr_pll.c (100%)
> rename drivers/video/{ => fbdev}/vermilion/vermilion.c (100%)
> rename drivers/video/{ => fbdev}/vermilion/vermilion.h (100%)
> rename drivers/video/{ => fbdev}/vesafb.c (100%)
> rename drivers/video/{ => fbdev}/vfb.c (100%)
> rename drivers/video/{ => fbdev}/vga16fb.c (100%)
> rename drivers/video/{ => fbdev}/via/Makefile (100%)
> rename drivers/video/{ => fbdev}/via/accel.c (100%)
> rename drivers/video/{ => fbdev}/via/accel.h (100%)
> rename drivers/video/{ => fbdev}/via/chip.h (100%)
> rename drivers/video/{ => fbdev}/via/debug.h (100%)
> rename drivers/video/{ => fbdev}/via/dvi.c (100%)
> rename drivers/video/{ => fbdev}/via/dvi.h (100%)
> rename drivers/video/{ => fbdev}/via/global.c (100%)
> rename drivers/video/{ => fbdev}/via/global.h (100%)
> rename drivers/video/{ => fbdev}/via/hw.c (100%)
> rename drivers/video/{ => fbdev}/via/hw.h (100%)
> rename drivers/video/{ => fbdev}/via/ioctl.c (100%)
> rename drivers/video/{ => fbdev}/via/ioctl.h (100%)
> rename drivers/video/{ => fbdev}/via/lcd.c (100%)
> rename drivers/video/{ => fbdev}/via/lcd.h (100%)
> rename drivers/video/{ => fbdev}/via/share.h (100%)
> rename drivers/video/{ => fbdev}/via/tblDPASetting.c (100%)
> rename drivers/video/{ => fbdev}/via/tblDPASetting.h (100%)
> rename drivers/video/{ => fbdev}/via/via-core.c (100%)
> rename drivers/video/{ => fbdev}/via/via-gpio.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux.h (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_ch7301.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_edid.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_sii164.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1621.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1622.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1625.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1631.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1632.c (100%)
> rename drivers/video/{ => fbdev}/via/via_aux_vt1636.c (100%)
> rename drivers/video/{ => fbdev}/via/via_clock.c (100%)
> rename drivers/video/{ => fbdev}/via/via_clock.h (100%)
> rename drivers/video/{ => fbdev}/via/via_i2c.c (100%)
> rename drivers/video/{ => fbdev}/via/via_modesetting.c (100%)
> rename drivers/video/{ => fbdev}/via/via_modesetting.h (100%)
> rename drivers/video/{ => fbdev}/via/via_utility.c (100%)
> rename drivers/video/{ => fbdev}/via/via_utility.h (100%)
> rename drivers/video/{ => fbdev}/via/viafbdev.c (100%)
> rename drivers/video/{ => fbdev}/via/viafbdev.h (100%)
> rename drivers/video/{ => fbdev}/via/viamode.c (100%)
> rename drivers/video/{ => fbdev}/via/viamode.h (100%)
> rename drivers/video/{ => fbdev}/via/vt1636.c (100%)
> rename drivers/video/{ => fbdev}/via/vt1636.h (100%)
> rename drivers/video/{ => fbdev}/vt8500lcdfb.c (100%)
> rename drivers/video/{ => fbdev}/vt8500lcdfb.h (100%)
> rename drivers/video/{ => fbdev}/vt8623fb.c (100%)
> rename drivers/video/{ => fbdev}/w100fb.c (100%)
> rename drivers/video/{ => fbdev}/w100fb.h (100%)
> rename drivers/video/{ => fbdev}/wm8505fb.c (100%)
> rename drivers/video/{ => fbdev}/wm8505fb_regs.h (100%)
> rename drivers/video/{ => fbdev}/wmt_ge_rops.c (100%)
> rename drivers/video/{ => fbdev}/wmt_ge_rops.h (100%)
> rename drivers/video/{ => fbdev}/xen-fbfront.c (100%)
> rename drivers/video/{ => fbdev}/xilinxfb.c (100%)
> delete mode 100644 drivers/video/omap2/Kconfig
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 8e3b8b06c0b2..fd0b0791d270 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -53,8 +53,8 @@ obj-y += gpu/
> obj-$(CONFIG_CONNECTOR) += connector/
>
> # i810fb and intelfb depend on char/agp/
> -obj-$(CONFIG_FB_I810) += video/i810/
> -obj-$(CONFIG_FB_INTEL) += video/intelfb/
> +obj-$(CONFIG_FB_I810) += video/fbdev/i810/
> +obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
>
> obj-$(CONFIG_PARPORT) += parport/
> obj-y += base/ block/ misc/ mfd/ nfc/
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 22262a3a0e2d..f0f26a0b746e 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -23,6 +23,10 @@ source "drivers/gpu/host1x/Kconfig"
>
> source "drivers/gpu/drm/Kconfig"
>
> +source "drivers/video/fbdev/Kconfig"
> +
> +source "drivers/video/backlight/Kconfig"
> +
> config VGASTATE
> tristate
> default n
> @@ -39,2491 +43,14 @@ config VIDEOMODE_HELPERS
> config HDMI
> bool
>
> -menuconfig FB
> - tristate "Support for frame buffer devices"
> - ---help---
> - The frame buffer device provides an abstraction for the graphics
> - hardware. It represents the frame buffer of some video hardware and
> - allows application software to access the graphics hardware through
> - a well-defined interface, so the software doesn't need to know
> - anything about the low-level (hardware register) stuff.
> -
> - Frame buffer devices work identically across the different
> - architectures supported by Linux and make the implementation of
> - application programs easier and more portable; at this point, an X
> - server exists which uses the frame buffer device exclusively.
> - On several non-X86 architectures, the frame buffer device is the
> - only way to use the graphics hardware.
> -
> - The device is accessed through special device nodes, usually located
> - in the /dev directory, i.e. /dev/fb*.
> -
> - You need an utility program called fbset to make full use of frame
> - buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
> - and the Framebuffer-HOWTO at
> - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
> - information.
> -
> - Say Y here and to the driver for your graphics board below if you
> - are compiling a kernel for a non-x86 architecture.
> -
> - If you are compiling for the x86 architecture, you can say Y if you
> - want to play with it, but it is not essential. Please note that
> - running graphical applications that directly touch the hardware
> - (e.g. an accelerated X server) and that are not frame buffer
> - device-aware may cause unexpected results. If unsure, say N.
> -
> -config FIRMWARE_EDID
> - bool "Enable firmware EDID"
> - depends on FB
> - default n
> - ---help---
> - This enables access to the EDID transferred from the firmware.
> - On the i386, this is from the Video BIOS. Enable this if DDC/I2C
> - transfers do not work for your driver and if you are using
> - nvidiafb, i810fb or savagefb.
> -
> - In general, choosing Y for this option is safe. If you
> - experience extremely long delays while booting before you get
> - something on your display, try setting this to N. Matrox cards in
> - combination with certain motherboards and monitors are known to
> - suffer from this problem.
> -
> -config FB_DDC
> - tristate
> - depends on FB
> - select I2C_ALGOBIT
> - select I2C
> - default n
> -
> -config FB_BOOT_VESA_SUPPORT
> - bool
> - depends on FB
> - default n
> - ---help---
> - If true, at least one selected framebuffer driver can take advantage
> - of VESA video modes set at an early boot stage via the vga= parameter.
> -
> -config FB_CFB_FILLRECT
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the cfb_fillrect function for generic software rectangle
> - filling. This is used by drivers that don't provide their own
> - (accelerated) version.
> -
> -config FB_CFB_COPYAREA
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the cfb_copyarea function for generic software area copying.
> - This is used by drivers that don't provide their own (accelerated)
> - version.
> -
> -config FB_CFB_IMAGEBLIT
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the cfb_imageblit function for generic software image
> - blitting. This is used by drivers that don't provide their own
> - (accelerated) version.
> -
> -config FB_CFB_REV_PIXELS_IN_BYTE
> - bool
> - depends on FB
> - default n
> - ---help---
> - Allow generic frame-buffer functions to work on displays with 1, 2
> - and 4 bits per pixel depths which has opposite order of pixels in
> - byte order to bytes in long order.
> -
> -config FB_SYS_FILLRECT
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the sys_fillrect function for generic software rectangle
> - filling. This is used by drivers that don't provide their own
> - (accelerated) version and the framebuffer is in system RAM.
> -
> -config FB_SYS_COPYAREA
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the sys_copyarea function for generic software area copying.
> - This is used by drivers that don't provide their own (accelerated)
> - version and the framebuffer is in system RAM.
> -
> -config FB_SYS_IMAGEBLIT
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Include the sys_imageblit function for generic software image
> - blitting. This is used by drivers that don't provide their own
> - (accelerated) version and the framebuffer is in system RAM.
> -
> -menuconfig FB_FOREIGN_ENDIAN
> - bool "Framebuffer foreign endianness support"
> - depends on FB
> - ---help---
> - This menu will let you enable support for the framebuffers with
> - non-native endianness (e.g. Little-Endian framebuffer on a
> - Big-Endian machine). Most probably you don't have such hardware,
> - so it's safe to say "n" here.
> -
> -choice
> - prompt "Choice endianness support"
> - depends on FB_FOREIGN_ENDIAN
> -
> -config FB_BOTH_ENDIAN
> - bool "Support for Big- and Little-Endian framebuffers"
> -
> -config FB_BIG_ENDIAN
> - bool "Support for Big-Endian framebuffers only"
> -
> -config FB_LITTLE_ENDIAN
> - bool "Support for Little-Endian framebuffers only"
> -
> -endchoice
> -
> -config FB_SYS_FOPS
> - tristate
> - depends on FB
> - default n
> -
> -config FB_DEFERRED_IO
> - bool
> - depends on FB
> -
> -config FB_HECUBA
> - tristate
> - depends on FB
> - depends on FB_DEFERRED_IO
> -
> -config FB_SVGALIB
> - tristate
> - depends on FB
> - default n
> - ---help---
> - Common utility functions useful to fbdev drivers of VGA-based
> - cards.
> -
> -config FB_MACMODES
> - tristate
> - depends on FB
> - default n
> -
> -config FB_BACKLIGHT
> - bool
> - depends on FB
> - select BACKLIGHT_LCD_SUPPORT
> - select BACKLIGHT_CLASS_DEVICE
> - default n
> -
> -config FB_MODE_HELPERS
> - bool "Enable Video Mode Handling Helpers"
> - depends on FB
> - default n
> - ---help---
> - This enables functions for handling video modes using the
> - Generalized Timing Formula and the EDID parser. A few drivers rely
> - on this feature such as the radeonfb, rivafb, and the i810fb. If
> - your driver does not take advantage of this feature, choosing Y will
> - just increase the kernel size by about 5K.
> -
> -config FB_TILEBLITTING
> - bool "Enable Tile Blitting Support"
> - depends on FB
> - default n
> - ---help---
> - This enables tile blitting. Tile blitting is a drawing technique
> - where the screen is divided into rectangular sections (tiles), whereas
> - the standard blitting divides the screen into pixels. Because the
> - default drawing element is a tile, drawing functions will be passed
> - parameters in terms of number of tiles instead of number of pixels.
> - For example, to draw a single character, instead of using bitmaps,
> - an index to an array of bitmaps will be used. To clear or move a
> - rectangular section of a screen, the rectangle will be described in
> - terms of number of tiles in the x- and y-axis.
> -
> - This is particularly important to one driver, matroxfb. If
> - unsure, say N.
> -
> -comment "Frame buffer hardware drivers"
> - depends on FB
> -
> -config FB_GRVGA
> - tristate "Aeroflex Gaisler framebuffer support"
> - depends on FB && SPARC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
> -
> -config FB_CIRRUS
> - tristate "Cirrus Logic support"
> - depends on FB && (ZORRO || PCI)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - This enables support for Cirrus Logic GD542x/543x based boards on
> - Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
> -
> - If you have a PCI-based system, this enables support for these
> - chips: GD-543x, GD-544x, GD-5480.
> -
> - Please read the file <file:Documentation/fb/cirrusfb.txt>.
> -
> - Say N unless you have such a graphics board or plan to get one
> - before you next recompile the kernel.
> -
> -config FB_PM2
> - tristate "Permedia2 support"
> - depends on FB && ((AMIGA && BROKEN) || PCI)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for cards based on
> - the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
> - The driver was tested on the following cards:
> - Diamond FireGL 1000 PRO AGP
> - ELSA Gloria Synergy PCI
> - Appian Jeronimo PRO (both heads) PCI
> - 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
> - Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
> - ASK Graphic Blaster Exxtreme AGP
> -
> - To compile this driver as a module, choose M here: the
> - module will be called pm2fb.
> -
> -config FB_PM2_FIFO_DISCONNECT
> - bool "enable FIFO disconnect feature"
> - depends on FB_PM2 && PCI
> - help
> - Support the Permedia2 FIFO disconnect feature.
> -
> -config FB_ARMCLCD
> - tristate "ARM PrimeCell PL110 support"
> - depends on ARM || ARM64 || COMPILE_TEST
> - depends on FB && ARM_AMBA
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This framebuffer device driver is for the ARM PrimeCell PL110
> - Colour LCD controller. ARM PrimeCells provide the building
> - blocks for System on a Chip devices.
> -
> - If you want to compile this as a module (=code which can be
> - inserted into and removed from the running kernel), say M
> - here and read <file:Documentation/kbuild/modules.txt>. The module
> - will be called amba-clcd.
> -
> -config FB_ACORN
> - bool "Acorn VIDC support"
> - depends on (FB = y) && ARM && ARCH_ACORN
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Acorn VIDC graphics
> - hardware found in Acorn RISC PCs and other ARM-based machines. If
> - unsure, say N.
> -
> -config FB_CLPS711X
> - bool "CLPS711X LCD support"
> - depends on (FB = y) && ARM && ARCH_CLPS711X
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Say Y to enable the Framebuffer driver for the CLPS7111 and
> - EP7212 processors.
> -
> -config FB_SA1100
> - bool "SA-1100 LCD support"
> - depends on (FB = y) && ARM && ARCH_SA1100
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is a framebuffer device for the SA-1100 LCD Controller.
> - See <http://www.linux-fbdev.org/> for information on framebuffer
> - devices.
> -
> - If you plan to use the LCD display with your SA-1100 system, say
> - Y here.
> -
> -config FB_IMX
> - tristate "Freescale i.MX1/21/25/27 LCD support"
> - depends on FB && IMX_HAVE_PLATFORM_IMX_FB
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> -
> -config FB_CYBER2000
> - tristate "CyberPro 2000/2010/5000 support"
> - depends on FB && PCI && (BROKEN || !SPARC64)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This enables support for the Integraphics CyberPro 20x0 and 5000
> - VGA chips used in the Rebel.com Netwinder and other machines.
> - Say Y if you have a NetWinder or a graphics card containing this
> - device, otherwise say N.
> -
> -config FB_CYBER2000_DDC
> - bool "DDC for CyberPro support"
> - depends on FB_CYBER2000
> - select FB_DDC
> - default y
> - help
> - Say Y here if you want DDC support for your CyberPro graphics
> - card. This is only I2C bus support, driver does not use EDID.
> -
> -config FB_CYBER2000_I2C
> - bool "CyberPro 2000/2010/5000 I2C support"
> - depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
> - select I2C_ALGOBIT
> - help
> - Enable support for the I2C video decoder interface on the
> - Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
> - on the Netwinder machines for the SAA7111 video capture.
> -
> -config FB_APOLLO
> - bool
> - depends on (FB = y) && APOLLO
> - default y
> - select FB_CFB_FILLRECT
> - select FB_CFB_IMAGEBLIT
> -
> -config FB_Q40
> - bool
> - depends on (FB = y) && Q40
> - default y
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> -
> -config FB_AMIGA
> - tristate "Amiga native chipset support"
> - depends on FB && AMIGA
> - help
> - This is the frame buffer device driver for the builtin graphics
> - chipset found in Amigas.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called amifb.
> -
> -config FB_AMIGA_OCS
> - bool "Amiga OCS chipset support"
> - depends on FB_AMIGA
> - help
> - This enables support for the original Agnus and Denise video chips,
> - found in the Amiga 1000 and most A500's and A2000's. If you intend
> - to run Linux on any of these systems, say Y; otherwise say N.
> -
> -config FB_AMIGA_ECS
> - bool "Amiga ECS chipset support"
> - depends on FB_AMIGA
> - help
> - This enables support for the Enhanced Chip Set, found in later
> - A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
> - you intend to run Linux on any of these systems, say Y; otherwise
> - say N.
> -
> -config FB_AMIGA_AGA
> - bool "Amiga AGA chipset support"
> - depends on FB_AMIGA
> - help
> - This enables support for the Advanced Graphics Architecture (also
> - known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
> - and CD32. If you intend to run Linux on any of these systems, say Y;
> - otherwise say N.
> -
> -config FB_FM2
> - bool "Amiga FrameMaster II/Rainbow II support"
> - depends on (FB = y) && ZORRO
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Amiga FrameMaster
> - card from BSC (exhibited 1992 but not shipped as a CBM product).
> -
> -config FB_ARC
> - tristate "Arc Monochrome LCD board support"
> - depends on FB && X86
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - help
> - This enables support for the Arc Monochrome LCD board. The board
> - is based on the KS-108 lcd controller and is typically a matrix
> - of 2*n chips. This driver was tested with a 128x64 panel. This
> - driver supports it for use with x86 SBCs through a 16 bit GPIO
> - interface (8 bit data, 8 bit control). If you anticipate using
> - this driver, say Y or M; otherwise say N. You must specify the
> - GPIO IO address to be used for setting control and data.
> -
> -config FB_ATARI
> - bool "Atari native chipset support"
> - depends on (FB = y) && ATARI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the builtin graphics
> - chipset found in Ataris.
> -
> -config FB_OF
> - bool "Open Firmware frame buffer device support"
> - depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES
> - help
> - Say Y if you want support with Open Firmware for your graphics
> - board.
> -
> -config FB_CONTROL
> - bool "Apple \"control\" display support"
> - depends on (FB = y) && PPC_PMAC && PPC32
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES
> - help
> - This driver supports a frame buffer for the graphics adapter in the
> - Power Macintosh 7300 and others.
> -
> -config FB_PLATINUM
> - bool "Apple \"platinum\" display support"
> - depends on (FB = y) && PPC_PMAC && PPC32
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES
> - help
> - This driver supports a frame buffer for the "platinum" graphics
> - adapter in some Power Macintoshes.
> -
> -config FB_VALKYRIE
> - bool "Apple \"valkyrie\" display support"
> - depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES
> - help
> - This driver supports a frame buffer for the "valkyrie" graphics
> - adapter in some Power Macintoshes.
> -
> -config FB_CT65550
> - bool "Chips 65550 display support"
> - depends on (FB = y) && PPC32 && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Chips & Technologies
> - 65550 graphics chip in PowerBooks.
> -
> -config FB_ASILIANT
> - bool "Asiliant (Chips) 69000 display support"
> - depends on (FB = y) && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Asiliant 69030 chipset
> -
> -config FB_IMSTT
> - bool "IMS Twin Turbo display support"
> - depends on (FB = y) && PCI
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES if PPC
> - help
> - The IMS Twin Turbo is a PCI-based frame buffer card bundled with
> - many Macintosh and compatible computers.
> -
> -config FB_VGA16
> - tristate "VGA 16-color graphics support"
> - depends on FB && (X86 || PPC)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select VGASTATE
> - select FONT_8x16 if FRAMEBUFFER_CONSOLE
> - help
> - This is the frame buffer device driver for VGA 16 color graphic
> - cards. Say Y if you have such a card.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called vga16fb.
> -
> -config FB_BF54X_LQ043
> - tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
> - depends on FB && (BF54x) && !BF542
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
> -
> -config FB_BFIN_T350MCQB
> - tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
> - depends on FB && BLACKFIN
> - select BFIN_GPTIMERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
> - This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
> - It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
> -
> -config FB_BFIN_LQ035Q1
> - tristate "SHARP LQ035Q1DH02 TFT LCD"
> - depends on FB && BLACKFIN && SPI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select BFIN_GPTIMERS
> - help
> - This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
> - the Blackfin Landscape LCD EZ-Extender Card.
> - This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
> - It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called bfin-lq035q1-fb.
> -
> -config FB_BF537_LQ035
> - tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
> - depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select BFIN_GPTIMERS
> - help
> - This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
> - attached to a BF537.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called bf537-lq035.
> -
> -config FB_BFIN_7393
> - tristate "Blackfin ADV7393 Video encoder"
> - depends on FB && BLACKFIN
> - select I2C
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device for a ADV7393 video encoder
> - attached to a Blackfin on the PPI port.
> - If your Blackfin board has a ADV7393 select Y.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called bfin_adv7393fb.
> -
> -choice
> - prompt "Video mode support"
> - depends on FB_BFIN_7393
> - default NTSC
> -
> -config NTSC
> - bool 'NTSC 720x480'
> -
> -config PAL
> - bool 'PAL 720x576'
> -
> -config NTSC_640x480
> - bool 'NTSC 640x480 (Experimental)'
> -
> -config PAL_640x480
> - bool 'PAL 640x480 (Experimental)'
> -
> -config NTSC_YCBCR
> - bool 'NTSC 720x480 YCbCR input'
> -
> -config PAL_YCBCR
> - bool 'PAL 720x576 YCbCR input'
> -
> -endchoice
> -
> -choice
> - prompt "Size of ADV7393 frame buffer memory Single/Double Size"
> - depends on (FB_BFIN_7393)
> - default ADV7393_1XMEM
> -
> -config ADV7393_1XMEM
> - bool 'Single'
> -
> -config ADV7393_2XMEM
> - bool 'Double'
> -endchoice
> -
> -config FB_STI
> - tristate "HP STI frame buffer device support"
> - depends on FB && PARISC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select STI_CONSOLE
> - select VT
> - default y
> - ---help---
> - STI refers to the HP "Standard Text Interface" which is a set of
> - BIOS routines contained in a ROM chip in HP PA-RISC based machines.
> - Enabling this option will implement the linux framebuffer device
> - using calls to the STI BIOS routines for initialisation.
> -
> - If you enable this option, you will get a planar framebuffer device
> - /dev/fb which will work on the most common HP graphic cards of the
> - NGLE family, including the artist chips (in the 7xx and Bxxx series),
> - HCRX, HCRX24, CRX, CRX24 and VisEG series.
> -
> - It is safe to enable this option, so you should probably say "Y".
> -
> -config FB_MAC
> - bool "Generic Macintosh display support"
> - depends on (FB = y) && MAC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES
> -
> -config FB_HP300
> - bool
> - depends on (FB = y) && DIO
> - select FB_CFB_IMAGEBLIT
> - default y
> -
> -config FB_TGA
> - tristate "TGA/SFB+ framebuffer support"
> - depends on FB && (ALPHA || TC)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select BITREVERSE
> - ---help---
> - This is the frame buffer device driver for generic TGA and SFB+
> - graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
> - also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
> - TURBOchannel cards, also known as PMAGD-A, -B and -C.
> -
> - Due to hardware limitations ZLX-E2 and E3 cards are not supported
> - for DECstation 5000/200 systems. Additionally due to firmware
> - limitations these cards may cause troubles with booting DECstation
> - 5000/240 and /260 systems, but are fully supported under Linux if
> - you manage to get it going. ;-)
> -
> - Say Y if you have one of those.
> -
> -config FB_UVESA
> - tristate "Userspace VESA VGA graphics support"
> - depends on FB && CONNECTOR
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MODE_HELPERS
> - help
> - This is the frame buffer driver for generic VBE 2.0 compliant
> - graphic cards. It can also take advantage of VBE 3.0 features,
> - such as refresh rate adjustment.
> -
> - This driver generally provides more features than vesafb but
> - requires a userspace helper application called 'v86d'. See
> - <file:Documentation/fb/uvesafb.txt> for more information.
> -
> - If unsure, say N.
> -
> -config FB_VESA
> - bool "VESA VGA graphics support"
> - depends on (FB = y) && X86
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_BOOT_VESA_SUPPORT
> - help
> - This is the frame buffer device driver for generic VESA 2.0
> - compliant graphic cards. The older VESA 1.2 cards are not supported.
> - You will get a boot time penguin logo at no additional cost. Please
> - read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
> -
> -config FB_EFI
> - bool "EFI-based Framebuffer Support"
> - depends on (FB = y) && X86 && EFI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the EFI frame buffer device driver. If the firmware on
> - your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
> - using the EFI framebuffer as your console.
> -
> -config FB_N411
> - tristate "N411 Apollo/Hecuba devkit support"
> - depends on FB && X86 && MMU
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - select FB_HECUBA
> - help
> - This enables support for the Apollo display controller in its
> - Hecuba form using the n411 devkit.
> -
> -config FB_HGA
> - tristate "Hercules mono graphics support"
> - depends on FB && X86
> - help
> - Say Y here if you have a Hercules mono graphics card.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called hgafb.
> -
> - As this card technology is at least 25 years old,
> - most people will answer N here.
> -
> -config FB_SGIVW
> - tristate "SGI Visual Workstation framebuffer support"
> - depends on FB && X86_VISWS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - SGI Visual Workstation support for framebuffer graphics.
> -
> -config FB_GBE
> - bool "SGI Graphics Backend frame buffer support"
> - depends on (FB = y) && (SGI_IP32 || X86_VISWS)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for SGI Graphics Backend.
> - This chip is used in SGI O2 and Visual Workstation 320/540.
> -
> -config FB_GBE_MEM
> - int "Video memory size in MB"
> - depends on FB_GBE
> - default 4
> - help
> - This is the amount of memory reserved for the framebuffer,
> - which can be any value between 1MB and 8MB.
> -
> -config FB_SBUS
> - bool "SBUS and UPA framebuffers"
> - depends on (FB = y) && SPARC
> - help
> - Say Y if you want support for SBUS or UPA based frame buffer device.
> -
> -config FB_BW2
> - bool "BWtwo support"
> - depends on (FB = y) && (SPARC && FB_SBUS)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the BWtwo frame buffer.
> -
> -config FB_CG3
> - bool "CGthree support"
> - depends on (FB = y) && (SPARC && FB_SBUS)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the CGthree frame buffer.
> -
> -config FB_CG6
> - bool "CGsix (GX,TurboGX) support"
> - depends on (FB = y) && (SPARC && FB_SBUS)
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the CGsix (GX, TurboGX)
> - frame buffer.
> -
> -config FB_FFB
> - bool "Creator/Creator3D/Elite3D support"
> - depends on FB_SBUS && SPARC64
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Creator, Creator3D,
> - and Elite3D graphics boards.
> -
> -config FB_TCX
> - bool "TCX (SS4/SS5 only) support"
> - depends on FB_SBUS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the TCX 24/8bit frame
> - buffer.
> -
> -config FB_CG14
> - bool "CGfourteen (SX) support"
> - depends on FB_SBUS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the CGfourteen frame
> - buffer on Desktop SPARCsystems with the SX graphics option.
> -
> -config FB_P9100
> - bool "P9100 (Sparcbook 3 only) support"
> - depends on FB_SBUS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the P9100 card
> - supported on Sparcbook 3 machines.
> -
> -config FB_LEO
> - bool "Leo (ZX) support"
> - depends on FB_SBUS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the SBUS-based Sun ZX
> - (leo) frame buffer cards.
> -
> -config FB_IGA
> - bool "IGA 168x display support"
> - depends on (FB = y) && SPARC32
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device for the INTERGRAPHICS 1680 and
> - successor frame buffer cards.
> -
> -config FB_XVR500
> - bool "Sun XVR-500 3DLABS Wildcat support"
> - depends on (FB = y) && PCI && SPARC64
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device for the Sun XVR-500 and similar
> - graphics cards based upon the 3DLABS Wildcat chipset. The driver
> - only works on sparc64 systems where the system firmware has
> - mostly initialized the card already. It is treated as a
> - completely dumb framebuffer device.
> -
> -config FB_XVR2500
> - bool "Sun XVR-2500 3DLABS Wildcat support"
> - depends on (FB = y) && PCI && SPARC64
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device for the Sun XVR-2500 and similar
> - graphics cards based upon the 3DLABS Wildcat chipset. The driver
> - only works on sparc64 systems where the system firmware has
> - mostly initialized the card already. It is treated as a
> - completely dumb framebuffer device.
> -
> -config FB_XVR1000
> - bool "Sun XVR-1000 support"
> - depends on (FB = y) && SPARC64
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer device for the Sun XVR-1000 and similar
> - graphics cards. The driver only works on sparc64 systems where
> - the system firmware has mostly initialized the card already. It
> - is treated as a completely dumb framebuffer device.
> -
> -config FB_PVR2
> - tristate "NEC PowerVR 2 display support"
> - depends on FB && SH_DREAMCAST
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Say Y here if you have a PowerVR 2 card in your box. If you plan to
> - run linux on your Dreamcast, you will have to say Y here.
> - This driver may or may not work on other PowerVR 2 cards, but is
> - totally untested. Use at your own risk. If unsure, say N.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called pvr2fb.
> -
> - You can pass several parameters to the driver at boot time or at
> - module load time. The parameters look like "video=pvr2:XXX", where
> - the meaning of XXX can be found at the end of the main source file
> - (<file:drivers/video/pvr2fb.c>). Please see the file
> - <file:Documentation/fb/pvr2fb.txt>.
> -
> -config FB_OPENCORES
> - tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
> - depends on FB
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This enables support for the OpenCores VGA/LCD core.
> -
> - The OpenCores VGA/LCD core is typically used together with
> - softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
> - systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
> -
> - The source code and specification for the core is available at
> - <http://opencores.org/project,vga_lcd>
> -
> -config FB_S1D13XXX
> - tristate "Epson S1D13XXX framebuffer support"
> - depends on FB
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Support for S1D13XXX framebuffer device family (currently only
> - working with S1D13806). Product specs at
> - <http://vdc.epson.com/>
> -
> -config FB_ATMEL
> - tristate "AT91/AT32 LCD Controller support"
> - depends on FB && HAVE_FB_ATMEL
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> - help
> - This enables support for the AT91/AT32 LCD Controller.
> -
> -config FB_INTSRAM
> - bool "Frame Buffer in internal SRAM"
> - depends on FB_ATMEL && ARCH_AT91SAM9261
> - help
> - Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
> - to let frame buffer in external SDRAM.
> -
> -config FB_ATMEL_STN
> - bool "Use a STN display with AT91/AT32 LCD Controller"
> - depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
> - default n
> - help
> - Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
> - Controller. Say N if you want to connect a TFT.
> -
> - If unsure, say N.
> -
> -config FB_NVIDIA
> - tristate "nVidia Framebuffer Support"
> - depends on FB && PCI
> - select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select BITREVERSE
> - select VGASTATE
> - help
> - This driver supports graphics boards with the nVidia chips, TNT
> - and newer. For very old chipsets, such as the RIVA128, then use
> - the rivafb.
> - Say Y if you have such a graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called nvidiafb.
> -
> -config FB_NVIDIA_I2C
> - bool "Enable DDC Support"
> - depends on FB_NVIDIA
> - select FB_DDC
> - help
> - This enables I2C support for nVidia Chipsets. This is used
> - only for getting EDID information from the attached display
> - allowing for robust video mode handling and switching.
> -
> - Because fbdev-2.6 requires that drivers must be able to
> - independently validate video mode parameters, you should say Y
> - here.
> -
> -config FB_NVIDIA_DEBUG
> - bool "Lots of debug output"
> - depends on FB_NVIDIA
> - default n
> - help
> - Say Y here if you want the nVidia driver to output all sorts
> - of debugging information to provide to the maintainer when
> - something goes wrong.
> -
> -config FB_NVIDIA_BACKLIGHT
> - bool "Support for backlight control"
> - depends on FB_NVIDIA
> - default y
> - help
> - Say Y here if you want to control the backlight of your display.
> -
> -config FB_RIVA
> - tristate "nVidia Riva support"
> - depends on FB && PCI
> - select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select BITREVERSE
> - select VGASTATE
> - help
> - This driver supports graphics boards with the nVidia Riva/Geforce
> - chips.
> - Say Y if you have such a graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called rivafb.
> -
> -config FB_RIVA_I2C
> - bool "Enable DDC Support"
> - depends on FB_RIVA
> - select FB_DDC
> - help
> - This enables I2C support for nVidia Chipsets. This is used
> - only for getting EDID information from the attached display
> - allowing for robust video mode handling and switching.
> -
> - Because fbdev-2.6 requires that drivers must be able to
> - independently validate video mode parameters, you should say Y
> - here.
> -
> -config FB_RIVA_DEBUG
> - bool "Lots of debug output"
> - depends on FB_RIVA
> - default n
> - help
> - Say Y here if you want the Riva driver to output all sorts
> - of debugging information to provide to the maintainer when
> - something goes wrong.
> -
> -config FB_RIVA_BACKLIGHT
> - bool "Support for backlight control"
> - depends on FB_RIVA
> - default y
> - help
> - Say Y here if you want to control the backlight of your display.
> -
> -config FB_I740
> - tristate "Intel740 support"
> - depends on FB && PCI
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select VGASTATE
> - select FB_DDC
> - help
> - This driver supports graphics cards based on Intel740 chip.
> -
> -config FB_I810
> - tristate "Intel 810/815 support"
> - depends on FB && PCI && X86_32 && AGP_INTEL
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select VGASTATE
> - help
> - This driver supports the on-board graphics built in to the Intel 810
> - and 815 chipsets. Say Y if you have and plan to use such a board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called i810fb.
> -
> - For more information, please read
> - <file:Documentation/fb/intel810.txt>
> -
> -config FB_I810_GTF
> - bool "use VESA Generalized Timing Formula"
> - depends on FB_I810
> - help
> - If you say Y, then the VESA standard, Generalized Timing Formula
> - or GTF, will be used to calculate the required video timing values
> - per video mode. Since the GTF allows nondiscrete timings
> - (nondiscrete being a range of values as opposed to discrete being a
> - set of values), you'll be able to use any combination of horizontal
> - and vertical resolutions, and vertical refresh rates without having
> - to specify your own timing parameters. This is especially useful
> - to maximize the performance of an aging display, or if you just
> - have a display with nonstandard dimensions. A VESA compliant
> - monitor is recommended, but can still work with non-compliant ones.
> - If you need or want this, then select this option. The timings may
> - not be compliant with Intel's recommended values. Use at your own
> - risk.
> -
> - If you say N, the driver will revert to discrete video timings
> - using a set recommended by Intel in their documentation.
> -
> - If unsure, say N.
> -
> -config FB_I810_I2C
> - bool "Enable DDC Support"
> - depends on FB_I810 && FB_I810_GTF
> - select FB_DDC
> - help
> -
> -config FB_LE80578
> - tristate "Intel LE80578 (Vermilion) support"
> - depends on FB && PCI && X86
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This driver supports the LE80578 (Vermilion Range) chipset
> -
> -config FB_CARILLO_RANCH
> - tristate "Intel Carillo Ranch support"
> - depends on FB_LE80578 && FB && PCI && X86
> - help
> - This driver supports the LE80578 (Carillo Ranch) board
> -
> -config FB_INTEL
> - tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
> - depends on FB && PCI && X86 && AGP_INTEL && EXPERT
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
> - depends on !DRM_I915
> - help
> - This driver supports the on-board graphics built in to the Intel
> - 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
> - Say Y if you have and plan to use such a board.
> -
> - To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called intelfb.
> -
> - For more information, please read <file:Documentation/fb/intelfb.txt>
> -
> -config FB_INTEL_DEBUG
> - bool "Intel driver Debug Messages"
> - depends on FB_INTEL
> - ---help---
> - Say Y here if you want the Intel driver to output all sorts
> - of debugging information to provide to the maintainer when
> - something goes wrong.
> -
> -config FB_INTEL_I2C
> - bool "DDC/I2C for Intel framebuffer support"
> - depends on FB_INTEL
> - select FB_DDC
> - default y
> - help
> - Say Y here if you want DDC/I2C support for your on-board Intel graphics.
> -
> -config FB_MATROX
> - tristate "Matrox acceleration"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_TILEBLITTING
> - select FB_MACMODES if PPC_PMAC
> - ---help---
> - Say Y here if you have a Matrox Millennium, Matrox Millennium II,
> - Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
> - Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
> - Matrox G400, G450 or G550 card in your box.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called matroxfb.
> -
> - You can pass several parameters to the driver at boot time or at
> - module load time. The parameters look like "video=matroxfb:XXX", and
> - are described in <file:Documentation/fb/matroxfb.txt>.
> -
> -config FB_MATROX_MILLENIUM
> - bool "Millennium I/II support"
> - depends on FB_MATROX
> - help
> - Say Y here if you have a Matrox Millennium or Matrox Millennium II
> - video card. If you select "Advanced lowlevel driver options" below,
> - you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
> - packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
> - also use font widths different from 8.
> -
> -config FB_MATROX_MYSTIQUE
> - bool "Mystique support"
> - depends on FB_MATROX
> - help
> - Say Y here if you have a Matrox Mystique or Matrox Mystique 220
> - video card. If you select "Advanced lowlevel driver options" below,
> - you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
> - packed pixel and 32 bpp packed pixel. You can also use font widths
> - different from 8.
> -
> -config FB_MATROX_G
> - bool "G100/G200/G400/G450/G550 support"
> - depends on FB_MATROX
> - ---help---
> - Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
> - video card. If you select "Advanced lowlevel driver options", you
> - should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
> - pixel and 32 bpp packed pixel. You can also use font widths
> - different from 8.
> -
> - If you need support for G400 secondary head, you must say Y to
> - "Matrox I2C support" and "G400 second head support" right below.
> - G450/G550 secondary head and digital output are supported without
> - additional modules.
> -
> - The driver starts in monitor mode. You must use the matroxset tool
> - (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
> - swap primary and secondary head outputs, or to change output mode.
> - Secondary head driver always start in 640x480 resolution and you
> - must use fbset to change it.
> -
> - Do not forget that second head supports only 16 and 32 bpp
> - packed pixels, so it is a good idea to compile them into the kernel
> - too. You can use only some font widths, as the driver uses generic
> - painting procedures (the secondary head does not use acceleration
> - engine).
> -
> - G450/G550 hardware can display TV picture only from secondary CRTC,
> - and it performs no scaling, so picture must have 525 or 625 lines.
> -
> -config FB_MATROX_I2C
> - tristate "Matrox I2C support"
> - depends on FB_MATROX
> - select FB_DDC
> - ---help---
> - This drivers creates I2C buses which are needed for accessing the
> - DDC (I2C) bus present on all Matroxes, an I2C bus which
> - interconnects Matrox optional devices, like MGA-TVO on G200 and
> - G400, and the secondary head DDC bus, present on G400 only.
> -
> - You can say Y or M here if you want to experiment with monitor
> - detection code. You must say Y or M here if you want to use either
> - second head of G400 or MGA-TVO on G200 or G400.
> -
> - If you compile it as module, it will create a module named
> - i2c-matroxfb.
> -
> -config FB_MATROX_MAVEN
> - tristate "G400 second head support"
> - depends on FB_MATROX_G && FB_MATROX_I2C
> - ---help---
> - WARNING !!! This support does not work with G450 !!!
> -
> - Say Y or M here if you want to use a secondary head (meaning two
> - monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
> - head is not compatible with accelerated XFree 3.3.x SVGA servers -
> - secondary head output is blanked while you are in X. With XFree
> - 3.9.17 preview you can use both heads if you use SVGA over fbdev or
> - the fbdev driver on first head and the fbdev driver on second head.
> -
> - If you compile it as module, two modules are created,
> - matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
> - both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
> - also load i2c-matroxfb to get it to run.
> -
> - The driver starts in monitor mode and you must use the matroxset
> - tool (available at
> - <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
> - PAL or NTSC or to swap primary and secondary head outputs.
> - Secondary head driver also always start in 640x480 resolution, you
> - must use fbset to change it.
> -
> - Also do not forget that second head supports only 16 and 32 bpp
> - packed pixels, so it is a good idea to compile them into the kernel
> - too. You can use only some font widths, as the driver uses generic
> - painting procedures (the secondary head does not use acceleration
> - engine).
> -
> -config FB_RADEON
> - tristate "ATI Radeon display support"
> - depends on FB && PCI
> - select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MACMODES if PPC_OF
> - help
> - Choose this option if you want to use an ATI Radeon graphics card as
> - a framebuffer device. There are both PCI and AGP versions. You
> - don't need to choose this to run the Radeon in plain VGA mode.
> -
> - There is a product page at
> - http://products.amd.com/en-us/GraphicCardResult.aspx
> -
> -config FB_RADEON_I2C
> - bool "DDC/I2C for ATI Radeon support"
> - depends on FB_RADEON
> - select FB_DDC
> - default y
> - help
> - Say Y here if you want DDC/I2C support for your Radeon board.
> -
> -config FB_RADEON_BACKLIGHT
> - bool "Support for backlight control"
> - depends on FB_RADEON
> - default y
> - help
> - Say Y here if you want to control the backlight of your display.
> -
> -config FB_RADEON_DEBUG
> - bool "Lots of debug output from Radeon driver"
> - depends on FB_RADEON
> - default n
> - help
> - Say Y here if you want the Radeon driver to output all sorts
> - of debugging information to provide to the maintainer when
> - something goes wrong.
> -
> -config FB_ATY128
> - tristate "ATI Rage128 display support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
> - select FB_MACMODES if PPC_PMAC
> - help
> - This driver supports graphics boards with the ATI Rage128 chips.
> - Say Y if you have such a graphics board and read
> - <file:Documentation/fb/aty128fb.txt>.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called aty128fb.
> -
> -config FB_ATY128_BACKLIGHT
> - bool "Support for backlight control"
> - depends on FB_ATY128
> - default y
> - help
> - Say Y here if you want to control the backlight of your display.
> -
> -config FB_ATY
> - tristate "ATI Mach64 display support" if PCI || ATARI
> - depends on FB && !SPARC32
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_BACKLIGHT if FB_ATY_BACKLIGHT
> - select FB_MACMODES if PPC
> - help
> - This driver supports graphics boards with the ATI Mach64 chips.
> - Say Y if you have such a graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called atyfb.
> -
> -config FB_ATY_CT
> - bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
> - depends on PCI && FB_ATY
> - default y if SPARC64 && PCI
> - help
> - Say Y here to support use of ATI's 64-bit Rage boards (or other
> - boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> - framebuffer device. The ATI product support page for these boards
> - is at <http://support.ati.com/products/pc/mach64/mach64.html>.
> -
> -config FB_ATY_GENERIC_LCD
> - bool "Mach64 generic LCD support"
> - depends on FB_ATY_CT
> - help
> - Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
> - Rage XC, or Rage XL chipset.
> -
> -config FB_ATY_GX
> - bool "Mach64 GX support" if PCI
> - depends on FB_ATY
> - default y if ATARI
> - help
> - Say Y here to support use of the ATI Mach64 Graphics Expression
> - board (or other boards based on the Mach64 GX chipset) as a
> - framebuffer device. The ATI product support page for these boards
> - is at
> - <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
> -
> -config FB_ATY_BACKLIGHT
> - bool "Support for backlight control"
> - depends on FB_ATY
> - default y
> - help
> - Say Y here if you want to control the backlight of your display.
> -
> -config FB_S3
> - tristate "S3 Trio/Virge support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_TILEBLITTING
> - select FB_SVGALIB
> - select VGASTATE
> - select FONT_8x16 if FRAMEBUFFER_CONSOLE
> - ---help---
> - Driver for graphics boards with S3 Trio / S3 Virge chip.
> -
> -config FB_S3_DDC
> - bool "DDC for S3 support"
> - depends on FB_S3
> - select FB_DDC
> - default y
> - help
> - Say Y here if you want DDC support for your S3 graphics card.
> -
> -config FB_SAVAGE
> - tristate "S3 Savage support"
> - depends on FB && PCI
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select VGASTATE
> - help
> - This driver supports notebooks and computers with S3 Savage PCI/AGP
> - chips.
> -
> - Say Y if you have such a graphics card.
> -
> - To compile this driver as a module, choose M here; the module
> - will be called savagefb.
> -
> -config FB_SAVAGE_I2C
> - bool "Enable DDC2 Support"
> - depends on FB_SAVAGE
> - select FB_DDC
> - help
> - This enables I2C support for S3 Savage Chipsets. This is used
> - only for getting EDID information from the attached display
> - allowing for robust video mode handling and switching.
> -
> - Because fbdev-2.6 requires that drivers must be able to
> - independently validate video mode parameters, you should say Y
> - here.
> -
> -config FB_SAVAGE_ACCEL
> - bool "Enable Console Acceleration"
> - depends on FB_SAVAGE
> - default n
> - help
> - This option will compile in console acceleration support. If
> - the resulting framebuffer console has bothersome glitches, then
> - choose N here.
> -
> -config FB_SIS
> - tristate "SiS/XGI display support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_BOOT_VESA_SUPPORT if FB_SIS = y
> - help
> - This is the frame buffer device driver for the SiS 300, 315, 330
> - and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
> - Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
> -
> - To compile this driver as a module, choose M here; the module
> - will be called sisfb.
> -
> -config FB_SIS_300
> - bool "SiS 300 series support"
> - depends on FB_SIS
> - help
> - Say Y here to support use of the SiS 300/305, 540, 630 and 730.
> -
> -config FB_SIS_315
> - bool "SiS 315/330/340 series and XGI support"
> - depends on FB_SIS
> - help
> - Say Y here to support use of the SiS 315, 330 and 340 series
> - (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
> - as XGI V3XT, V5, V8 and Z7.
> -
> -config FB_VIA
> - tristate "VIA UniChrome (Pro) and Chrome9 display support"
> - depends on FB && PCI && X86
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select I2C_ALGOBIT
> - select I2C
> - select GPIOLIB
> - help
> - This is the frame buffer device driver for Graphics chips of VIA
> - UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
> - CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
> - /P4M900,VX800)
> - Say Y if you have a VIA UniChrome graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called viafb.
> -
> -if FB_VIA
> -
> -config FB_VIA_DIRECT_PROCFS
> - bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
> - depends on FB_VIA
> - default n
> - help
> - Allow direct hardware access to some output registers via procfs.
> - This is dangerous but may provide the only chance to get the
> - correct output device configuration.
> - Its use is strongly discouraged.
> -
> -config FB_VIA_X_COMPATIBILITY
> - bool "X server compatibility"
> - depends on FB_VIA
> - default n
> - help
> - This option reduces the functionality (power saving, ...) of the
> - framebuffer to avoid negative impact on the OpenChrome X server.
> - If you use any X server other than fbdev you should enable this
> - otherwise it should be safe to disable it and allow using all
> - features.
> -
> -endif
> -
> -config FB_NEOMAGIC
> - tristate "NeoMagic display support"
> - depends on FB && PCI
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select VGASTATE
> - help
> - This driver supports notebooks with NeoMagic PCI chips.
> - Say Y if you have such a graphics card.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called neofb.
> -
> -config FB_KYRO
> - tristate "IMG Kyro support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
> - graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called kyrofb.
> -
> -config FB_3DFX
> - tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
> - depends on FB && PCI
> - select FB_CFB_IMAGEBLIT
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_MODE_HELPERS
> - help
> - This driver supports graphics boards with the 3Dfx Banshee,
> - Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
> - such a graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called tdfxfb.
> -
> -config FB_3DFX_ACCEL
> - bool "3Dfx Acceleration functions"
> - depends on FB_3DFX
> - ---help---
> - This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
> - device driver with acceleration functions.
> -
> -config FB_3DFX_I2C
> - bool "Enable DDC/I2C support"
> - depends on FB_3DFX
> - select FB_DDC
> - default y
> - help
> - Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
> -
> -config FB_VOODOO1
> - tristate "3Dfx Voodoo Graphics (sst1) support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
> - Voodoo2 (cvg) based graphics card.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called sstfb.
> -
> - WARNING: Do not use any application that uses the 3D engine
> - (namely glide) while using this driver.
> - Please read the <file:Documentation/fb/sstfb.txt> for supported
> - options and other important info support.
> -
> -config FB_VT8623
> - tristate "VIA VT8623 support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_TILEBLITTING
> - select FB_SVGALIB
> - select VGASTATE
> - select FONT_8x16 if FRAMEBUFFER_CONSOLE
> - ---help---
> - Driver for CastleRock integrated graphics core in the
> - VIA VT8623 [Apollo CLE266] chipset.
> -
> -config FB_TRIDENT
> - tristate "Trident/CyberXXX/CyberBlade support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - This is the frame buffer device driver for Trident PCI/AGP chipsets.
> - Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
> - and Blade XP.
> - There are also integrated versions of these chips called CyberXXXX,
> - CyberImage or CyberBlade. These chips are mostly found in laptops
> - but also on some motherboards including early VIA EPIA motherboards.
> - For more information, read <file:Documentation/fb/tridentfb.txt>
> -
> - Say Y if you have such a graphics board.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called tridentfb.
> -
> -config FB_ARK
> - tristate "ARK 2000PV support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_TILEBLITTING
> - select FB_SVGALIB
> - select VGASTATE
> - select FONT_8x16 if FRAMEBUFFER_CONSOLE
> - ---help---
> - Driver for PCI graphics boards with ARK 2000PV chip
> - and ICS 5342 RAMDAC.
> -
> -config FB_PM3
> - tristate "Permedia3 support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the 3DLabs Permedia3
> - chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
> - similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
> - and maybe other boards.
> -
> -config FB_CARMINE
> - tristate "Fujitsu carmine frame buffer support"
> - depends on FB && PCI
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Fujitsu Carmine chip.
> - The driver provides two independent frame buffer devices.
> -
> -choice
> - depends on FB_CARMINE
> - prompt "DRAM timing"
> - default FB_CARMINE_DRAM_EVAL
> -
> -config FB_CARMINE_DRAM_EVAL
> - bool "Eval board timings"
> - help
> - Use timings which work on the eval card.
> -
> -config CARMINE_DRAM_CUSTOM
> - bool "Custom board timings"
> - help
> - Use custom board timings.
> -endchoice
> -
> -config FB_AU1100
> - bool "Au1100 LCD Driver"
> - depends on (FB = y) && MIPS_ALCHEMY
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the framebuffer driver for the AMD Au1100 SOC. It can drive
> - various panels and CRTs by passing in kernel cmd line option
> - au1100fb:panel=<name>.
> -
> -config FB_AU1200
> - bool "Au1200/Au1300 LCD Driver"
> - depends on (FB = y) && MIPS_ALCHEMY
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - help
> - This is the framebuffer driver for the Au1200/Au1300 SOCs.
> - It can drive various panels and CRTs by passing in kernel cmd line
> - option au1200fb:panel=<name>.
> -
> -config FB_VT8500
> - bool "VIA VT8500 framebuffer support"
> - depends on (FB = y) && ARM && ARCH_VT8500
> - select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
> - select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
> - select FB_SYS_IMAGEBLIT
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> - help
> - This is the framebuffer driver for VIA VT8500 integrated LCD
> - controller.
> -
> -config FB_WM8505
> - bool "Wondermedia WM8xxx-series frame buffer support"
> - depends on (FB = y) && ARM && ARCH_VT8500
> - select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
> - select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
> - select FB_SYS_IMAGEBLIT
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> - help
> - This is the framebuffer driver for WonderMedia WM8xxx-series
> - integrated LCD controller. This driver covers the WM8505, WM8650
> - and WM8850 SoCs.
> -
> -config FB_WMT_GE_ROPS
> - bool "VT8500/WM8xxx accelerated raster ops support"
> - depends on (FB = y) && (FB_VT8500 || FB_WM8505)
> - default n
> - help
> - This adds support for accelerated raster operations on the
> - VIA VT8500 and Wondermedia 85xx series SoCs.
> -
> -source "drivers/video/geode/Kconfig"
> -
> -config FB_HIT
> - tristate "HD64461 Frame Buffer support"
> - depends on FB && HD64461
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This is the frame buffer device driver for the Hitachi HD64461 LCD
> - frame buffer card.
> -
> -config FB_PMAG_AA
> - bool "PMAG-AA TURBOchannel framebuffer support"
> - depends on (FB = y) && TC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
> - used mainly in the MIPS-based DECstation series.
> -
> -config FB_PMAG_BA
> - tristate "PMAG-BA TURBOchannel framebuffer support"
> - depends on FB && TC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
> - used mainly in the MIPS-based DECstation series.
> -
> -config FB_PMAGB_B
> - tristate "PMAGB-B TURBOchannel framebuffer support"
> - depends on FB && TC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Support for the PMAGB-B TURBOchannel framebuffer card used mainly
> - in the MIPS-based DECstation series. The card is currently only
> - supported in 1280x1024x8 mode.
> -
> -config FB_MAXINE
> - bool "Maxine (Personal DECstation) onboard framebuffer support"
> - depends on (FB = y) && MACH_DECSTATION
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Support for the onboard framebuffer (1024x768x8) in the Personal
> - DECstation series (Personal DECstation 5000/20, /25, /33, /50,
> - Codename "Maxine").
> -
> -config FB_G364
> - bool "G364 frame buffer support"
> - depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - The G364 driver is the framebuffer used in MIPS Magnum 4000 and
> - Olivetti M700-10 systems.
> -
> -config FB_68328
> - bool "Motorola 68328 native frame buffer support"
> - depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Say Y here if you want to support the built-in frame buffer of
> - the Motorola 68328 CPU family.
> -
> -config FB_PXA168
> - tristate "PXA168/910 LCD framebuffer support"
> - depends on FB && (CPU_PXA168 || CPU_PXA910)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the built-in LCD controller in the Marvell
> - MMP processor.
> -
> -config FB_PXA
> - tristate "PXA LCD framebuffer support"
> - depends on FB && ARCH_PXA
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the built-in LCD controller in the Intel
> - PXA2x0 processor.
> -
> - This driver is also available as a module ( = code which can be
> - inserted and removed from the running kernel whenever you want). The
> - module will be called pxafb. If you want to compile it as a module,
> - say M here and read <file:Documentation/kbuild/modules.txt>.
> -
> - If unsure, say N.
> -
> -config FB_PXA_OVERLAY
> - bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
> - default n
> - depends on FB_PXA && (PXA27x || PXA3xx)
> -
> -config FB_PXA_SMARTPANEL
> - bool "PXA Smartpanel LCD support"
> - default n
> - depends on FB_PXA
> -
> -config FB_PXA_PARAMETERS
> - bool "PXA LCD command line parameters"
> - default n
> - depends on FB_PXA
> - ---help---
> - Enable the use of kernel command line or module parameters
> - to configure the physical properties of the LCD panel when
> - using the PXA LCD driver.
> -
> - This option allows you to override the panel parameters
> - supplied by the platform in order to support multiple
> - different models of flatpanel. If you will only be using a
> - single model of flatpanel then you can safely leave this
> - option disabled.
> -
> - <file:Documentation/fb/pxafb.txt> describes the available parameters.
> -
> -config PXA3XX_GCU
> - tristate "PXA3xx 2D graphics accelerator driver"
> - depends on FB_PXA
> - help
> - Kernelspace driver for the 2D graphics controller unit (GCU)
> - found on PXA3xx processors. There is a counterpart driver in the
> - DirectFB suite, see http://www.directfb.org/
> -
> - If you compile this as a module, it will be called pxa3xx_gcu.
> -
> -config FB_MBX
> - tristate "2700G LCD framebuffer support"
> - depends on FB && ARCH_PXA
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Framebuffer driver for the Intel 2700G (Marathon) Graphics
> - Accelerator
> -
> -config FB_MBX_DEBUG
> - bool "Enable debugging info via debugfs"
> - depends on FB_MBX && DEBUG_FS
> - default n
> - ---help---
> - Enable this if you want debugging information using the debug
> - filesystem (debugfs)
> -
> - If unsure, say N.
> -
> -config FB_FSL_DIU
> - tristate "Freescale DIU framebuffer support"
> - depends on FB && FSL_SOC
> - select FB_MODE_HELPERS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select PPC_LIB_RHEAP
> - ---help---
> - Framebuffer driver for the Freescale SoC DIU
> -
> -config FB_W100
> - tristate "W100 frame buffer support"
> - depends on FB && ARCH_PXA
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
> - It can also drive the w3220 chip found on iPAQ hx4700.
> -
> - This driver is also available as a module ( = code which can be
> - inserted and removed from the running kernel whenever you want). The
> - module will be called w100fb. If you want to compile it as a module,
> - say M here and read <file:Documentation/kbuild/modules.txt>.
> -
> - If unsure, say N.
> -
> -config FB_SH_MOBILE_LCDC
> - tristate "SuperH Mobile LCDC framebuffer support"
> - depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - select FB_BACKLIGHT
> - select SH_MIPI_DSI if SH_LCD_MIPI_DSI
> - ---help---
> - Frame buffer driver for the on-chip SH-Mobile LCD controller.
> -
> -config FB_SH_MOBILE_HDMI
> - tristate "SuperH Mobile HDMI controller support"
> - depends on FB_SH_MOBILE_LCDC
> - select FB_MODE_HELPERS
> - select SOUND
> - select SND
> - select SND_SOC
> - ---help---
> - Driver for the on-chip SH-Mobile HDMI controller.
> -
> -config FB_TMIO
> - tristate "Toshiba Mobile IO FrameBuffer support"
> - depends on FB && MFD_CORE
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the Toshiba Mobile IO integrated as found
> - on the Sharp SL-6000 series
> -
> - This driver is also available as a module ( = code which can be
> - inserted and removed from the running kernel whenever you want). The
> - module will be called tmiofb. If you want to compile it as a module,
> - say M here and read <file:Documentation/kbuild/modules.txt>.
> -
> - If unsure, say N.
> -
> -config FB_TMIO_ACCELL
> - bool "tmiofb acceleration"
> - depends on FB_TMIO
> - default y
> -
> -config FB_S3C
> - tristate "Samsung S3C framebuffer support"
> - depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
> - ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the built-in FB controller in the Samsung
> - SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
> - and the S3C64XX series such as the S3C6400 and S3C6410.
> -
> - These chips all have the same basic framebuffer design with the
> - actual capabilities depending on the chip. For instance the S3C6400
> - and S3C6410 support 4 hardware windows whereas the S3C24XX series
> - currently only have two.
> -
> - Currently the support is only for the S3C6400 and S3C6410 SoCs.
> -
> -config FB_S3C_DEBUG_REGWRITE
> - bool "Debug register writes"
> - depends on FB_S3C
> - ---help---
> - Show all register writes via pr_debug()
> -
> -config FB_S3C2410
> - tristate "S3C2410 LCD framebuffer support"
> - depends on FB && ARCH_S3C24XX
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the built-in LCD controller in the Samsung
> - S3C2410 processor.
> -
> - This driver is also available as a module ( = code which can be
> - inserted and removed from the running kernel whenever you want). The
> - module will be called s3c2410fb. If you want to compile it as a module,
> - say M here and read <file:Documentation/kbuild/modules.txt>.
> -
> - If unsure, say N.
> -config FB_S3C2410_DEBUG
> - bool "S3C2410 lcd debug messages"
> - depends on FB_S3C2410
> - help
> - Turn on debugging messages. Note that you can set/unset at run time
> - through sysfs
> -
> -config FB_NUC900
> - bool "NUC900 LCD framebuffer support"
> - depends on FB && ARCH_W90X900
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the built-in LCD controller in the Nuvoton
> - NUC900 processor
> -
> -config GPM1040A0_320X240
> - bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
> - depends on FB_NUC900
> -
> -config FB_SM501
> - tristate "Silicon Motion SM501 framebuffer support"
> - depends on FB && MFD_SM501
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for the CRT and LCD controllers in the Silicon
> - Motion SM501.
> -
> - This driver is also available as a module ( = code which can be
> - inserted and removed from the running kernel whenever you want). The
> - module will be called sm501fb. If you want to compile it as a module,
> - say M here and read <file:Documentation/kbuild/modules.txt>.
> -
> - If unsure, say N.
> -
> -config FB_SMSCUFX
> - tristate "SMSC UFX6000/7000 USB Framebuffer support"
> - depends on FB && USB
> - select FB_MODE_HELPERS
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - ---help---
> - This is a kernel framebuffer driver for SMSC UFX USB devices.
> - Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
> - mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
> - (USB 3.0) devices.
> - To compile as a module, choose M here: the module name is smscufx.
> -
> -config FB_UDL
> - tristate "Displaylink USB Framebuffer support"
> - depends on FB && USB
> - select FB_MODE_HELPERS
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - ---help---
> - This is a kernel framebuffer driver for DisplayLink USB devices.
> - Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
> - mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
> - To compile as a module, choose M here: the module name is udlfb.
> -
> -config FB_IBM_GXT4500
> - tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
> - depends on FB && PPC
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Say Y here to enable support for the IBM GXT4000P/6000P and
> - GXT4500P/6500P display adaptor based on Raster Engine RC1000,
> - found on some IBM System P (pSeries) machines. This driver
> - doesn't use Geometry Engine GT1000.
> -
> -config FB_PS3
> - tristate "PS3 GPU framebuffer driver"
> - depends on FB && PS3_PS3AV
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
> - ---help---
> - Include support for the virtual frame buffer in the PS3 platform.
> -
> -config FB_PS3_DEFAULT_SIZE_M
> - int "PS3 default frame buffer size (in MiB)"
> - depends on FB_PS3
> - default 9
> - ---help---
> - This is the default size (in MiB) of the virtual frame buffer in
> - the PS3.
> - The default value can be overridden on the kernel command line
> - using the "ps3fb" option (e.g. "ps3fb=9M");
> -
> -config FB_XILINX
> - tristate "Xilinx frame buffer support"
> - depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Include support for the Xilinx ML300/ML403 reference design
> - framebuffer. ML300 carries a 640*480 LCD display on the board,
> - ML403 uses a standard DB15 VGA connector.
> -
> -config FB_GOLDFISH
> - tristate "Goldfish Framebuffer"
> - depends on FB && HAS_DMA
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Framebuffer driver for Goldfish Virtual Platform
> -
> -config FB_COBALT
> - tristate "Cobalt server LCD frame buffer support"
> - depends on FB && (MIPS_COBALT || MIPS_SEAD3)
> -
> -config FB_SH7760
> - bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
> - depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
> - || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Support for the SH7760/SH7763/SH7720/SH7721 integrated
> - (D)STN/TFT LCD Controller.
> - Supports display resolutions up to 1024x1024 pixel, grayscale and
> - color operation, with depths ranging from 1 bpp to 8 bpp monochrome
> - and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
> - panels <= 320 pixel horizontal resolution.
> -
> -config FB_DA8XX
> - tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
> - depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_CFB_REV_PIXELS_IN_BYTE
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> - ---help---
> - This is the frame buffer device driver for the TI LCD controller
> - found on DA8xx/OMAP-L1xx/AM335x SoCs.
> - If unsure, say N.
> -
> -config FB_VIRTUAL
> - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
> - depends on FB
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - ---help---
> - This is a `virtual' frame buffer device. It operates on a chunk of
> - unswappable kernel memory instead of on the memory of a graphics
> - board. This means you cannot see any output sent to this frame
> - buffer device, while it does consume precious memory. The main use
> - of this frame buffer device is testing and debugging the frame
> - buffer subsystem. Do NOT enable it for normal systems! To protect
> - the innocent, it has to be enabled explicitly at boot time using the
> - kernel option `video=vfb:'.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called vfb. In order to load it, you must use
> - the vfb_enable=1 option.
> -
> - If unsure, say N.
> -
> -config XEN_FBDEV_FRONTEND
> - tristate "Xen virtual frame buffer support"
> - depends on FB && XEN
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
> - select XEN_XENBUS_FRONTEND
> - default y
> - help
> - This driver implements the front-end of the Xen virtual
> - frame buffer driver. It communicates with a back-end
> - in another domain.
> -
> -config FB_METRONOME
> - tristate "E-Ink Metronome/8track controller support"
> - depends on FB
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - help
> - This driver implements support for the E-Ink Metronome
> - controller. The pre-release name for this device was 8track
> - and could also have been called by some vendors as PVI-nnnn.
> -
> -config FB_MB862XX
> - tristate "Fujitsu MB862xx GDC support"
> - depends on FB
> - depends on PCI || (OF && PPC)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
> -
> -choice
> - prompt "GDC variant"
> - depends on FB_MB862XX
> -
> -config FB_MB862XX_PCI_GDC
> - bool "Carmine/Coral-P(A) GDC"
> - depends on PCI
> - ---help---
> - This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
> - PCI graphics controller devices.
> -
> -config FB_MB862XX_LIME
> - bool "Lime GDC"
> - depends on OF && PPC
> - select FB_FOREIGN_ENDIAN
> - select FB_LITTLE_ENDIAN
> - ---help---
> - Framebuffer support for Fujitsu Lime GDC on host CPU bus.
> -
> -endchoice
> -
> -config FB_MB862XX_I2C
> - bool "Support I2C bus on MB862XX GDC"
> - depends on FB_MB862XX && I2C
> - default y
> - help
> - Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
> - driver to support accessing I2C devices on controller's I2C bus.
> - These are usually some video decoder chips.
> -
> -config FB_EP93XX
> - tristate "EP93XX frame buffer support"
> - depends on FB && ARCH_EP93XX
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - ---help---
> - Framebuffer driver for the Cirrus Logic EP93XX series of processors.
> - This driver is also available as a module. The module will be called
> - ep93xx-fb.
> -
> -config FB_PRE_INIT_FB
> - bool "Don't reinitialize, use bootloader's GDC/Display configuration"
> - depends on FB && FB_MB862XX_LIME
> - ---help---
> - Select this option if display contents should be inherited as set by
> - the bootloader.
> -
> -config FB_MSM
> - tristate "MSM Framebuffer support"
> - depends on FB && ARCH_MSM
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> -
> -config FB_MX3
> - tristate "MX3 Framebuffer support"
> - depends on FB && MX3_IPU
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - default y
> - help
> - This is a framebuffer device for the i.MX31 LCD Controller. So
> - far only synchronous displays are supported. If you plan to use
> - an LCD display with your i.MX31 system, say Y here.
> -
> -config FB_BROADSHEET
> - tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
> - depends on FB
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - help
> - This driver implements support for the E-Ink Broadsheet
> - controller. The release name for this device was Epson S1D13521
> - and could also have been called by other names when coupled with
> - a bridge adapter.
> -
> -config FB_AUO_K190X
> - tristate "AUO-K190X EPD controller support"
> - depends on FB
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - select FB_DEFERRED_IO
> - help
> - Provides support for epaper controllers from the K190X series
> - of AUO. These controllers can be used to drive epaper displays
> - from Sipix.
> -
> - This option enables the common support, shared by the individual
> - controller drivers. You will also have to enable the driver
> - for the controller type used in your device.
> -
> -config FB_AUO_K1900
> - tristate "AUO-K1900 EPD controller support"
> - depends on FB && FB_AUO_K190X
> - help
> - This driver implements support for the AUO K1900 epd-controller.
> - This controller can drive Sipix epaper displays but can only do
> - serial updates, reducing the number of possible frames per second.
> -
> -config FB_AUO_K1901
> - tristate "AUO-K1901 EPD controller support"
> - depends on FB && FB_AUO_K190X
> - help
> - This driver implements support for the AUO K1901 epd-controller.
> - This controller can drive Sipix epaper displays and supports
> - concurrent updates, making higher frames per second possible.
> -
> -config FB_JZ4740
> - tristate "JZ4740 LCD framebuffer support"
> - depends on FB && MACH_JZ4740
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - help
> - Framebuffer support for the JZ4740 SoC.
> -
> -config FB_MXS
> - tristate "MXS LCD framebuffer support"
> - depends on FB && ARCH_MXS
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - select FB_MODE_HELPERS
> - select VIDEOMODE_HELPERS
> - help
> - Framebuffer support for the MXS SoC.
> -
> -config FB_PUV3_UNIGFX
> - tristate "PKUnity v3 Unigfx framebuffer support"
> - depends on FB && UNICORE32 && ARCH_PUV3
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_SYS_FOPS
> - help
> - Choose this option if you want to use the Unigfx device as a
> - framebuffer device. Without the support of PCI & AGP.
> -
> -config FB_HYPERV
> - tristate "Microsoft Hyper-V Synthetic Video support"
> - depends on FB && HYPERV
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
> -
> -config FB_SIMPLE
> - bool "Simple framebuffer support"
> - depends on (FB = y)
> - select FB_CFB_FILLRECT
> - select FB_CFB_COPYAREA
> - select FB_CFB_IMAGEBLIT
> - help
> - Say Y if you want support for a simple frame-buffer.
> -
> - This driver assumes that the display hardware has been initialized
> - before the kernel boots, and the kernel will simply render to the
> - pre-allocated frame buffer surface.
> -
> - Configuration re: surface address, size, and format must be provided
> - through device tree, or plain old platform data.
> -
> -source "drivers/video/omap/Kconfig"
> -source "drivers/video/omap2/Kconfig"
> -source "drivers/video/exynos/Kconfig"
> -source "drivers/video/mmp/Kconfig"
> -source "drivers/video/backlight/Kconfig"
> -
> if VT
> source "drivers/video/console/Kconfig"
> endif
>
> if FB || SGI_NEWPORT_CONSOLE
> source "drivers/video/logo/Kconfig"
> -endif
>
> -config FB_SH_MOBILE_MERAM
> - tristate "SuperH Mobile MERAM read ahead support"
> - depends on (SUPERH || ARCH_SHMOBILE)
> - select GENERIC_ALLOCATOR
> - ---help---
> - Enable MERAM support for the SuperH controller.
> -
> - This will allow for caching of the framebuffer to provide more
> - reliable access under heavy main memory bus traffic situations.
> - Up to 4 memory channels can be configured, allowing 4 RGB or
> - 2 YCbCr framebuffers to be configured.
> +endif
>
> -config FB_SSD1307
> - tristate "Solomon SSD1307 framebuffer support"
> - depends on FB && I2C
> - depends on OF
> - depends on GPIOLIB
> - select FB_SYS_FOPS
> - select FB_SYS_FILLRECT
> - select FB_SYS_COPYAREA
> - select FB_SYS_IMAGEBLIT
> - select FB_DEFERRED_IO
> - select PWM
> - help
> - This driver implements support for the Solomon SSD1307
> - OLED controller over I2C.
>
> endmenu
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index ae17ddf49a00..94fe9c486c60 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -1,179 +1,15 @@
> -# Makefile for the Linux video drivers.
> -# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
> -# Rewritten to use lists instead of if-statements.
> -
> -# Each configuration option enables a list of files.
> -
> obj-$(CONFIG_VGASTATE) += vgastate.o
> obj-$(CONFIG_HDMI) += hdmi.o
> -obj-y += fb_notify.o
> -obj-$(CONFIG_FB) += fb.o
> -fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
> - modedb.o fbcvt.o
> -fb-objs := $(fb-y)
>
> obj-$(CONFIG_VT) += console/
> obj-$(CONFIG_LOGO) += logo/
> obj-y += backlight/
>
> -obj-$(CONFIG_EXYNOS_VIDEO) += exynos/
> -
> -obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
> -obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
> -obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
> -obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
> -obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
> -obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
> -obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
> -obj-$(CONFIG_FB_SVGALIB) += svgalib.o
> -obj-$(CONFIG_FB_MACMODES) += macmodes.o
> -obj-$(CONFIG_FB_DDC) += fb_ddc.o
> -obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
> -obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
> -
> -# Hardware specific drivers go first
> -obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
> -obj-$(CONFIG_FB_ARC) += arcfb.o
> -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
> -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
> -obj-$(CONFIG_FB_GRVGA) += grvga.o
> -obj-$(CONFIG_FB_PM2) += pm2fb.o
> -obj-$(CONFIG_FB_PM3) += pm3fb.o
> -
> -obj-$(CONFIG_FB_I740) += i740fb.o
> -obj-$(CONFIG_FB_MATROX) += matrox/
> -obj-$(CONFIG_FB_RIVA) += riva/
> -obj-$(CONFIG_FB_NVIDIA) += nvidia/
> -obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
> -obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
> -obj-$(CONFIG_FB_RADEON) += aty/
> -obj-$(CONFIG_FB_SIS) += sis/
> -obj-$(CONFIG_FB_VIA) += via/
> -obj-$(CONFIG_FB_KYRO) += kyro/
> -obj-$(CONFIG_FB_SAVAGE) += savage/
> -obj-$(CONFIG_FB_GEODE) += geode/
> -obj-$(CONFIG_FB_MBX) += mbx/
> -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
> -obj-$(CONFIG_FB_3DFX) += tdfxfb.o
> -obj-$(CONFIG_FB_CONTROL) += controlfb.o
> -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
> -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
> -obj-$(CONFIG_FB_CT65550) += chipsfb.o
> -obj-$(CONFIG_FB_IMSTT) += imsttfb.o
> -obj-$(CONFIG_FB_FM2) += fm2fb.o
> -obj-$(CONFIG_FB_VT8623) += vt8623fb.o
> -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
> -obj-$(CONFIG_FB_LE80578) += vermilion/
> -obj-$(CONFIG_FB_S3) += s3fb.o
> -obj-$(CONFIG_FB_ARK) += arkfb.o
> -obj-$(CONFIG_FB_STI) += stifb.o
> -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
> -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
> -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
> -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
> -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
> -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
> -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
> -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
> -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
> -obj-$(CONFIG_FB_ACORN) += acornfb.o
> -obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
> - atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
> -obj-$(CONFIG_FB_MAC) += macfb.o
> -obj-$(CONFIG_FB_HECUBA) += hecubafb.o
> -obj-$(CONFIG_FB_N411) += n411.o
> -obj-$(CONFIG_FB_HGA) += hgafb.o
> -obj-$(CONFIG_FB_XVR500) += sunxvr500.o
> -obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
> -obj-$(CONFIG_FB_XVR1000) += sunxvr1000.o
> -obj-$(CONFIG_FB_IGA) += igafb.o
> -obj-$(CONFIG_FB_APOLLO) += dnfb.o
> -obj-$(CONFIG_FB_Q40) += q40fb.o
> -obj-$(CONFIG_FB_TGA) += tgafb.o
> -obj-$(CONFIG_FB_HP300) += hpfb.o
> -obj-$(CONFIG_FB_G364) += g364fb.o
> -obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o
> -obj-$(CONFIG_FB_SA1100) += sa1100fb.o
> -obj-$(CONFIG_FB_HIT) += hitfb.o
> -obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
> -obj-$(CONFIG_FB_PVR2) += pvr2fb.o
> -obj-$(CONFIG_FB_VOODOO1) += sstfb.o
> -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
> -obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
> -obj-$(CONFIG_FB_68328) += 68328fb.o
> -obj-$(CONFIG_FB_GBE) += gbefb.o
> -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
> -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
> -obj-$(CONFIG_FB_PXA) += pxafb.o
> -obj-$(CONFIG_FB_PXA168) += pxa168fb.o
> -obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
> -obj-$(CONFIG_MMP_DISP) += mmp/
> -obj-$(CONFIG_FB_W100) += w100fb.o
> -obj-$(CONFIG_FB_TMIO) += tmiofb.o
> -obj-$(CONFIG_FB_AU1100) += au1100fb.o
> -obj-$(CONFIG_FB_AU1200) += au1200fb.o
> -obj-$(CONFIG_FB_VT8500) += vt8500lcdfb.o
> -obj-$(CONFIG_FB_WM8505) += wm8505fb.o
> -obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
> -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
> -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
> -obj-$(CONFIG_FB_MAXINE) += maxinefb.o
> -obj-$(CONFIG_FB_METRONOME) += metronomefb.o
> -obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
> -obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
> -obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
> -obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
> -obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
> -obj-$(CONFIG_FB_SH7760) += sh7760fb.o
> -obj-$(CONFIG_FB_IMX) += imxfb.o
> -obj-$(CONFIG_FB_S3C) += s3c-fb.o
> -obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
> -obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
> -obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
> -obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
> -obj-$(CONFIG_FB_PS3) += ps3fb.o
> -obj-$(CONFIG_FB_SM501) += sm501fb.o
> -obj-$(CONFIG_FB_UDL) += udlfb.o
> -obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
> -obj-$(CONFIG_FB_XILINX) += xilinxfb.o
> -obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
> -obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
> -obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o
> -obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
> -obj-$(CONFIG_FB_OMAP) += omap/
> -obj-y += omap2/
> -obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
> -obj-$(CONFIG_FB_CARMINE) += carminefb.o
> -obj-$(CONFIG_FB_MB862XX) += mb862xx/
> -obj-$(CONFIG_FB_MSM) += msm/
> -obj-$(CONFIG_FB_NUC900) += nuc900fb.o
> -obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
> -obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
> -obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
> -obj-$(CONFIG_FB_OPENCORES) += ocfb.o
> -
> -# Platform or fallback drivers go here
> -obj-$(CONFIG_FB_UVESA) += uvesafb.o
> -obj-$(CONFIG_FB_VESA) += vesafb.o
> -obj-$(CONFIG_FB_EFI) += efifb.o
> -obj-$(CONFIG_FB_VGA16) += vga16fb.o
> -obj-$(CONFIG_FB_OF) += offb.o
> -obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o
> -obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
> -obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
> -obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
> -obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
> -obj-$(CONFIG_FB_MX3) += mx3fb.o
> -obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
> -obj-$(CONFIG_FB_MXS) += mxsfb.o
> -obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
> -obj-$(CONFIG_FB_SIMPLE) += simplefb.o
> -
> -# the test framebuffer is last
> -obj-$(CONFIG_FB_VIRTUAL) += vfb.o
> +obj-y += fbdev/
>
> #video output switch sysfs driver
> obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
> +
> obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
> ifeq ($(CONFIG_OF),y)
> obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o
> diff --git a/drivers/video/68328fb.c b/drivers/video/fbdev/68328fb.c
> similarity index 100%
> rename from drivers/video/68328fb.c
> rename to drivers/video/fbdev/68328fb.c
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> new file mode 100644
> index 000000000000..582987896f8d
> --- /dev/null
> +++ b/drivers/video/fbdev/Kconfig
> @@ -0,0 +1,2481 @@
> +#
> +# fbdev configuration
> +#
> +
> +menuconfig FB
> + tristate "Support for frame buffer devices"
> + ---help---
> + The frame buffer device provides an abstraction for the graphics
> + hardware. It represents the frame buffer of some video hardware and
> + allows application software to access the graphics hardware through
> + a well-defined interface, so the software doesn't need to know
> + anything about the low-level (hardware register) stuff.
> +
> + Frame buffer devices work identically across the different
> + architectures supported by Linux and make the implementation of
> + application programs easier and more portable; at this point, an X
> + server exists which uses the frame buffer device exclusively.
> + On several non-X86 architectures, the frame buffer device is the
> + only way to use the graphics hardware.
> +
> + The device is accessed through special device nodes, usually located
> + in the /dev directory, i.e. /dev/fb*.
> +
> + You need an utility program called fbset to make full use of frame
> + buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
> + and the Framebuffer-HOWTO at
> + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
> + information.
> +
> + Say Y here and to the driver for your graphics board below if you
> + are compiling a kernel for a non-x86 architecture.
> +
> + If you are compiling for the x86 architecture, you can say Y if you
> + want to play with it, but it is not essential. Please note that
> + running graphical applications that directly touch the hardware
> + (e.g. an accelerated X server) and that are not frame buffer
> + device-aware may cause unexpected results. If unsure, say N.
> +
> +config FIRMWARE_EDID
> + bool "Enable firmware EDID"
> + depends on FB
> + default n
> + ---help---
> + This enables access to the EDID transferred from the firmware.
> + On the i386, this is from the Video BIOS. Enable this if DDC/I2C
> + transfers do not work for your driver and if you are using
> + nvidiafb, i810fb or savagefb.
> +
> + In general, choosing Y for this option is safe. If you
> + experience extremely long delays while booting before you get
> + something on your display, try setting this to N. Matrox cards in
> + combination with certain motherboards and monitors are known to
> + suffer from this problem.
> +
> +config FB_DDC
> + tristate
> + depends on FB
> + select I2C_ALGOBIT
> + select I2C
> + default n
> +
> +config FB_BOOT_VESA_SUPPORT
> + bool
> + depends on FB
> + default n
> + ---help---
> + If true, at least one selected framebuffer driver can take advantage
> + of VESA video modes set at an early boot stage via the vga= parameter.
> +
> +config FB_CFB_FILLRECT
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the cfb_fillrect function for generic software rectangle
> + filling. This is used by drivers that don't provide their own
> + (accelerated) version.
> +
> +config FB_CFB_COPYAREA
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the cfb_copyarea function for generic software area copying.
> + This is used by drivers that don't provide their own (accelerated)
> + version.
> +
> +config FB_CFB_IMAGEBLIT
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the cfb_imageblit function for generic software image
> + blitting. This is used by drivers that don't provide their own
> + (accelerated) version.
> +
> +config FB_CFB_REV_PIXELS_IN_BYTE
> + bool
> + depends on FB
> + default n
> + ---help---
> + Allow generic frame-buffer functions to work on displays with 1, 2
> + and 4 bits per pixel depths which has opposite order of pixels in
> + byte order to bytes in long order.
> +
> +config FB_SYS_FILLRECT
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the sys_fillrect function for generic software rectangle
> + filling. This is used by drivers that don't provide their own
> + (accelerated) version and the framebuffer is in system RAM.
> +
> +config FB_SYS_COPYAREA
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the sys_copyarea function for generic software area copying.
> + This is used by drivers that don't provide their own (accelerated)
> + version and the framebuffer is in system RAM.
> +
> +config FB_SYS_IMAGEBLIT
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Include the sys_imageblit function for generic software image
> + blitting. This is used by drivers that don't provide their own
> + (accelerated) version and the framebuffer is in system RAM.
> +
> +menuconfig FB_FOREIGN_ENDIAN
> + bool "Framebuffer foreign endianness support"
> + depends on FB
> + ---help---
> + This menu will let you enable support for the framebuffers with
> + non-native endianness (e.g. Little-Endian framebuffer on a
> + Big-Endian machine). Most probably you don't have such hardware,
> + so it's safe to say "n" here.
> +
> +choice
> + prompt "Choice endianness support"
> + depends on FB_FOREIGN_ENDIAN
> +
> +config FB_BOTH_ENDIAN
> + bool "Support for Big- and Little-Endian framebuffers"
> +
> +config FB_BIG_ENDIAN
> + bool "Support for Big-Endian framebuffers only"
> +
> +config FB_LITTLE_ENDIAN
> + bool "Support for Little-Endian framebuffers only"
> +
> +endchoice
> +
> +config FB_SYS_FOPS
> + tristate
> + depends on FB
> + default n
> +
> +config FB_DEFERRED_IO
> + bool
> + depends on FB
> +
> +config FB_HECUBA
> + tristate
> + depends on FB
> + depends on FB_DEFERRED_IO
> +
> +config FB_SVGALIB
> + tristate
> + depends on FB
> + default n
> + ---help---
> + Common utility functions useful to fbdev drivers of VGA-based
> + cards.
> +
> +config FB_MACMODES
> + tristate
> + depends on FB
> + default n
> +
> +config FB_BACKLIGHT
> + bool
> + depends on FB
> + select BACKLIGHT_LCD_SUPPORT
> + select BACKLIGHT_CLASS_DEVICE
> + default n
> +
> +config FB_MODE_HELPERS
> + bool "Enable Video Mode Handling Helpers"
> + depends on FB
> + default n
> + ---help---
> + This enables functions for handling video modes using the
> + Generalized Timing Formula and the EDID parser. A few drivers rely
> + on this feature such as the radeonfb, rivafb, and the i810fb. If
> + your driver does not take advantage of this feature, choosing Y will
> + just increase the kernel size by about 5K.
> +
> +config FB_TILEBLITTING
> + bool "Enable Tile Blitting Support"
> + depends on FB
> + default n
> + ---help---
> + This enables tile blitting. Tile blitting is a drawing technique
> + where the screen is divided into rectangular sections (tiles), whereas
> + the standard blitting divides the screen into pixels. Because the
> + default drawing element is a tile, drawing functions will be passed
> + parameters in terms of number of tiles instead of number of pixels.
> + For example, to draw a single character, instead of using bitmaps,
> + an index to an array of bitmaps will be used. To clear or move a
> + rectangular section of a screen, the rectangle will be described in
> + terms of number of tiles in the x- and y-axis.
> +
> + This is particularly important to one driver, matroxfb. If
> + unsure, say N.
> +
> +comment "Frame buffer hardware drivers"
> + depends on FB
> +
> +config FB_GRVGA
> + tristate "Aeroflex Gaisler framebuffer support"
> + depends on FB && SPARC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
> +
> +config FB_CIRRUS
> + tristate "Cirrus Logic support"
> + depends on FB && (ZORRO || PCI)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + This enables support for Cirrus Logic GD542x/543x based boards on
> + Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
> +
> + If you have a PCI-based system, this enables support for these
> + chips: GD-543x, GD-544x, GD-5480.
> +
> + Please read the file <file:Documentation/fb/cirrusfb.txt>.
> +
> + Say N unless you have such a graphics board or plan to get one
> + before you next recompile the kernel.
> +
> +config FB_PM2
> + tristate "Permedia2 support"
> + depends on FB && ((AMIGA && BROKEN) || PCI)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for cards based on
> + the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
> + The driver was tested on the following cards:
> + Diamond FireGL 1000 PRO AGP
> + ELSA Gloria Synergy PCI
> + Appian Jeronimo PRO (both heads) PCI
> + 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
> + Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
> + ASK Graphic Blaster Exxtreme AGP
> +
> + To compile this driver as a module, choose M here: the
> + module will be called pm2fb.
> +
> +config FB_PM2_FIFO_DISCONNECT
> + bool "enable FIFO disconnect feature"
> + depends on FB_PM2 && PCI
> + help
> + Support the Permedia2 FIFO disconnect feature.
> +
> +config FB_ARMCLCD
> + tristate "ARM PrimeCell PL110 support"
> + depends on ARM || ARM64 || COMPILE_TEST
> + depends on FB && ARM_AMBA
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This framebuffer device driver is for the ARM PrimeCell PL110
> + Colour LCD controller. ARM PrimeCells provide the building
> + blocks for System on a Chip devices.
> +
> + If you want to compile this as a module (=code which can be
> + inserted into and removed from the running kernel), say M
> + here and read <file:Documentation/kbuild/modules.txt>. The module
> + will be called amba-clcd.
> +
> +config FB_ACORN
> + bool "Acorn VIDC support"
> + depends on (FB = y) && ARM && ARCH_ACORN
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Acorn VIDC graphics
> + hardware found in Acorn RISC PCs and other ARM-based machines. If
> + unsure, say N.
> +
> +config FB_CLPS711X
> + bool "CLPS711X LCD support"
> + depends on (FB = y) && ARM && ARCH_CLPS711X
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Say Y to enable the Framebuffer driver for the CLPS7111 and
> + EP7212 processors.
> +
> +config FB_SA1100
> + bool "SA-1100 LCD support"
> + depends on (FB = y) && ARM && ARCH_SA1100
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is a framebuffer device for the SA-1100 LCD Controller.
> + See <http://www.linux-fbdev.org/> for information on framebuffer
> + devices.
> +
> + If you plan to use the LCD display with your SA-1100 system, say
> + Y here.
> +
> +config FB_IMX
> + tristate "Freescale i.MX1/21/25/27 LCD support"
> + depends on FB && IMX_HAVE_PLATFORM_IMX_FB
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> +
> +config FB_CYBER2000
> + tristate "CyberPro 2000/2010/5000 support"
> + depends on FB && PCI && (BROKEN || !SPARC64)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This enables support for the Integraphics CyberPro 20x0 and 5000
> + VGA chips used in the Rebel.com Netwinder and other machines.
> + Say Y if you have a NetWinder or a graphics card containing this
> + device, otherwise say N.
> +
> +config FB_CYBER2000_DDC
> + bool "DDC for CyberPro support"
> + depends on FB_CYBER2000
> + select FB_DDC
> + default y
> + help
> + Say Y here if you want DDC support for your CyberPro graphics
> + card. This is only I2C bus support, driver does not use EDID.
> +
> +config FB_CYBER2000_I2C
> + bool "CyberPro 2000/2010/5000 I2C support"
> + depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
> + select I2C_ALGOBIT
> + help
> + Enable support for the I2C video decoder interface on the
> + Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
> + on the Netwinder machines for the SAA7111 video capture.
> +
> +config FB_APOLLO
> + bool
> + depends on (FB = y) && APOLLO
> + default y
> + select FB_CFB_FILLRECT
> + select FB_CFB_IMAGEBLIT
> +
> +config FB_Q40
> + bool
> + depends on (FB = y) && Q40
> + default y
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> +
> +config FB_AMIGA
> + tristate "Amiga native chipset support"
> + depends on FB && AMIGA
> + help
> + This is the frame buffer device driver for the builtin graphics
> + chipset found in Amigas.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called amifb.
> +
> +config FB_AMIGA_OCS
> + bool "Amiga OCS chipset support"
> + depends on FB_AMIGA
> + help
> + This enables support for the original Agnus and Denise video chips,
> + found in the Amiga 1000 and most A500's and A2000's. If you intend
> + to run Linux on any of these systems, say Y; otherwise say N.
> +
> +config FB_AMIGA_ECS
> + bool "Amiga ECS chipset support"
> + depends on FB_AMIGA
> + help
> + This enables support for the Enhanced Chip Set, found in later
> + A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
> + you intend to run Linux on any of these systems, say Y; otherwise
> + say N.
> +
> +config FB_AMIGA_AGA
> + bool "Amiga AGA chipset support"
> + depends on FB_AMIGA
> + help
> + This enables support for the Advanced Graphics Architecture (also
> + known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
> + and CD32. If you intend to run Linux on any of these systems, say Y;
> + otherwise say N.
> +
> +config FB_FM2
> + bool "Amiga FrameMaster II/Rainbow II support"
> + depends on (FB = y) && ZORRO
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Amiga FrameMaster
> + card from BSC (exhibited 1992 but not shipped as a CBM product).
> +
> +config FB_ARC
> + tristate "Arc Monochrome LCD board support"
> + depends on FB && X86
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + help
> + This enables support for the Arc Monochrome LCD board. The board
> + is based on the KS-108 lcd controller and is typically a matrix
> + of 2*n chips. This driver was tested with a 128x64 panel. This
> + driver supports it for use with x86 SBCs through a 16 bit GPIO
> + interface (8 bit data, 8 bit control). If you anticipate using
> + this driver, say Y or M; otherwise say N. You must specify the
> + GPIO IO address to be used for setting control and data.
> +
> +config FB_ATARI
> + bool "Atari native chipset support"
> + depends on (FB = y) && ATARI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the builtin graphics
> + chipset found in Ataris.
> +
> +config FB_OF
> + bool "Open Firmware frame buffer device support"
> + depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES
> + help
> + Say Y if you want support with Open Firmware for your graphics
> + board.
> +
> +config FB_CONTROL
> + bool "Apple \"control\" display support"
> + depends on (FB = y) && PPC_PMAC && PPC32
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES
> + help
> + This driver supports a frame buffer for the graphics adapter in the
> + Power Macintosh 7300 and others.
> +
> +config FB_PLATINUM
> + bool "Apple \"platinum\" display support"
> + depends on (FB = y) && PPC_PMAC && PPC32
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES
> + help
> + This driver supports a frame buffer for the "platinum" graphics
> + adapter in some Power Macintoshes.
> +
> +config FB_VALKYRIE
> + bool "Apple \"valkyrie\" display support"
> + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES
> + help
> + This driver supports a frame buffer for the "valkyrie" graphics
> + adapter in some Power Macintoshes.
> +
> +config FB_CT65550
> + bool "Chips 65550 display support"
> + depends on (FB = y) && PPC32 && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Chips & Technologies
> + 65550 graphics chip in PowerBooks.
> +
> +config FB_ASILIANT
> + bool "Asiliant (Chips) 69000 display support"
> + depends on (FB = y) && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Asiliant 69030 chipset
> +
> +config FB_IMSTT
> + bool "IMS Twin Turbo display support"
> + depends on (FB = y) && PCI
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES if PPC
> + help
> + The IMS Twin Turbo is a PCI-based frame buffer card bundled with
> + many Macintosh and compatible computers.
> +
> +config FB_VGA16
> + tristate "VGA 16-color graphics support"
> + depends on FB && (X86 || PPC)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VGASTATE
> + select FONT_8x16 if FRAMEBUFFER_CONSOLE
> + help
> + This is the frame buffer device driver for VGA 16 color graphic
> + cards. Say Y if you have such a card.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called vga16fb.
> +
> +config FB_BF54X_LQ043
> + tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
> + depends on FB && (BF54x) && !BF542
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
> +
> +config FB_BFIN_T350MCQB
> + tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
> + depends on FB && BLACKFIN
> + select BFIN_GPTIMERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
> + This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
> + It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
> +
> +config FB_BFIN_LQ035Q1
> + tristate "SHARP LQ035Q1DH02 TFT LCD"
> + depends on FB && BLACKFIN && SPI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select BFIN_GPTIMERS
> + help
> + This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
> + the Blackfin Landscape LCD EZ-Extender Card.
> + This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
> + It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called bfin-lq035q1-fb.
> +
> +config FB_BF537_LQ035
> + tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
> + depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select BFIN_GPTIMERS
> + help
> + This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
> + attached to a BF537.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called bf537-lq035.
> +
> +config FB_BFIN_7393
> + tristate "Blackfin ADV7393 Video encoder"
> + depends on FB && BLACKFIN
> + select I2C
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device for a ADV7393 video encoder
> + attached to a Blackfin on the PPI port.
> + If your Blackfin board has a ADV7393 select Y.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called bfin_adv7393fb.
> +
> +choice
> + prompt "Video mode support"
> + depends on FB_BFIN_7393
> + default NTSC
> +
> +config NTSC
> + bool 'NTSC 720x480'
> +
> +config PAL
> + bool 'PAL 720x576'
> +
> +config NTSC_640x480
> + bool 'NTSC 640x480 (Experimental)'
> +
> +config PAL_640x480
> + bool 'PAL 640x480 (Experimental)'
> +
> +config NTSC_YCBCR
> + bool 'NTSC 720x480 YCbCR input'
> +
> +config PAL_YCBCR
> + bool 'PAL 720x576 YCbCR input'
> +
> +endchoice
> +
> +choice
> + prompt "Size of ADV7393 frame buffer memory Single/Double Size"
> + depends on (FB_BFIN_7393)
> + default ADV7393_1XMEM
> +
> +config ADV7393_1XMEM
> + bool 'Single'
> +
> +config ADV7393_2XMEM
> + bool 'Double'
> +endchoice
> +
> +config FB_STI
> + tristate "HP STI frame buffer device support"
> + depends on FB && PARISC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select STI_CONSOLE
> + select VT
> + default y
> + ---help---
> + STI refers to the HP "Standard Text Interface" which is a set of
> + BIOS routines contained in a ROM chip in HP PA-RISC based machines.
> + Enabling this option will implement the linux framebuffer device
> + using calls to the STI BIOS routines for initialisation.
> +
> + If you enable this option, you will get a planar framebuffer device
> + /dev/fb which will work on the most common HP graphic cards of the
> + NGLE family, including the artist chips (in the 7xx and Bxxx series),
> + HCRX, HCRX24, CRX, CRX24 and VisEG series.
> +
> + It is safe to enable this option, so you should probably say "Y".
> +
> +config FB_MAC
> + bool "Generic Macintosh display support"
> + depends on (FB = y) && MAC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES
> +
> +config FB_HP300
> + bool
> + depends on (FB = y) && DIO
> + select FB_CFB_IMAGEBLIT
> + default y
> +
> +config FB_TGA
> + tristate "TGA/SFB+ framebuffer support"
> + depends on FB && (ALPHA || TC)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select BITREVERSE
> + ---help---
> + This is the frame buffer device driver for generic TGA and SFB+
> + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
> + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
> + TURBOchannel cards, also known as PMAGD-A, -B and -C.
> +
> + Due to hardware limitations ZLX-E2 and E3 cards are not supported
> + for DECstation 5000/200 systems. Additionally due to firmware
> + limitations these cards may cause troubles with booting DECstation
> + 5000/240 and /260 systems, but are fully supported under Linux if
> + you manage to get it going. ;-)
> +
> + Say Y if you have one of those.
> +
> +config FB_UVESA
> + tristate "Userspace VESA VGA graphics support"
> + depends on FB && CONNECTOR
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MODE_HELPERS
> + help
> + This is the frame buffer driver for generic VBE 2.0 compliant
> + graphic cards. It can also take advantage of VBE 3.0 features,
> + such as refresh rate adjustment.
> +
> + This driver generally provides more features than vesafb but
> + requires a userspace helper application called 'v86d'. See
> + <file:Documentation/fb/uvesafb.txt> for more information.
> +
> + If unsure, say N.
> +
> +config FB_VESA
> + bool "VESA VGA graphics support"
> + depends on (FB = y) && X86
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_BOOT_VESA_SUPPORT
> + help
> + This is the frame buffer device driver for generic VESA 2.0
> + compliant graphic cards. The older VESA 1.2 cards are not supported.
> + You will get a boot time penguin logo at no additional cost. Please
> + read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
> +
> +config FB_EFI
> + bool "EFI-based Framebuffer Support"
> + depends on (FB = y) && X86 && EFI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the EFI frame buffer device driver. If the firmware on
> + your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
> + using the EFI framebuffer as your console.
> +
> +config FB_N411
> + tristate "N411 Apollo/Hecuba devkit support"
> + depends on FB && X86 && MMU
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + select FB_HECUBA
> + help
> + This enables support for the Apollo display controller in its
> + Hecuba form using the n411 devkit.
> +
> +config FB_HGA
> + tristate "Hercules mono graphics support"
> + depends on FB && X86
> + help
> + Say Y here if you have a Hercules mono graphics card.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hgafb.
> +
> + As this card technology is at least 25 years old,
> + most people will answer N here.
> +
> +config FB_SGIVW
> + tristate "SGI Visual Workstation framebuffer support"
> + depends on FB && X86_VISWS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + SGI Visual Workstation support for framebuffer graphics.
> +
> +config FB_GBE
> + bool "SGI Graphics Backend frame buffer support"
> + depends on (FB = y) && (SGI_IP32 || X86_VISWS)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for SGI Graphics Backend.
> + This chip is used in SGI O2 and Visual Workstation 320/540.
> +
> +config FB_GBE_MEM
> + int "Video memory size in MB"
> + depends on FB_GBE
> + default 4
> + help
> + This is the amount of memory reserved for the framebuffer,
> + which can be any value between 1MB and 8MB.
> +
> +config FB_SBUS
> + bool "SBUS and UPA framebuffers"
> + depends on (FB = y) && SPARC
> + help
> + Say Y if you want support for SBUS or UPA based frame buffer device.
> +
> +config FB_BW2
> + bool "BWtwo support"
> + depends on (FB = y) && (SPARC && FB_SBUS)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the BWtwo frame buffer.
> +
> +config FB_CG3
> + bool "CGthree support"
> + depends on (FB = y) && (SPARC && FB_SBUS)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the CGthree frame buffer.
> +
> +config FB_CG6
> + bool "CGsix (GX,TurboGX) support"
> + depends on (FB = y) && (SPARC && FB_SBUS)
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the CGsix (GX, TurboGX)
> + frame buffer.
> +
> +config FB_FFB
> + bool "Creator/Creator3D/Elite3D support"
> + depends on FB_SBUS && SPARC64
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Creator, Creator3D,
> + and Elite3D graphics boards.
> +
> +config FB_TCX
> + bool "TCX (SS4/SS5 only) support"
> + depends on FB_SBUS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the TCX 24/8bit frame
> + buffer.
> +
> +config FB_CG14
> + bool "CGfourteen (SX) support"
> + depends on FB_SBUS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the CGfourteen frame
> + buffer on Desktop SPARCsystems with the SX graphics option.
> +
> +config FB_P9100
> + bool "P9100 (Sparcbook 3 only) support"
> + depends on FB_SBUS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the P9100 card
> + supported on Sparcbook 3 machines.
> +
> +config FB_LEO
> + bool "Leo (ZX) support"
> + depends on FB_SBUS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the SBUS-based Sun ZX
> + (leo) frame buffer cards.
> +
> +config FB_IGA
> + bool "IGA 168x display support"
> + depends on (FB = y) && SPARC32
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device for the INTERGRAPHICS 1680 and
> + successor frame buffer cards.
> +
> +config FB_XVR500
> + bool "Sun XVR-500 3DLABS Wildcat support"
> + depends on (FB = y) && PCI && SPARC64
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device for the Sun XVR-500 and similar
> + graphics cards based upon the 3DLABS Wildcat chipset. The driver
> + only works on sparc64 systems where the system firmware has
> + mostly initialized the card already. It is treated as a
> + completely dumb framebuffer device.
> +
> +config FB_XVR2500
> + bool "Sun XVR-2500 3DLABS Wildcat support"
> + depends on (FB = y) && PCI && SPARC64
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device for the Sun XVR-2500 and similar
> + graphics cards based upon the 3DLABS Wildcat chipset. The driver
> + only works on sparc64 systems where the system firmware has
> + mostly initialized the card already. It is treated as a
> + completely dumb framebuffer device.
> +
> +config FB_XVR1000
> + bool "Sun XVR-1000 support"
> + depends on (FB = y) && SPARC64
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer device for the Sun XVR-1000 and similar
> + graphics cards. The driver only works on sparc64 systems where
> + the system firmware has mostly initialized the card already. It
> + is treated as a completely dumb framebuffer device.
> +
> +config FB_PVR2
> + tristate "NEC PowerVR 2 display support"
> + depends on FB && SH_DREAMCAST
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Say Y here if you have a PowerVR 2 card in your box. If you plan to
> + run linux on your Dreamcast, you will have to say Y here.
> + This driver may or may not work on other PowerVR 2 cards, but is
> + totally untested. Use at your own risk. If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called pvr2fb.
> +
> + You can pass several parameters to the driver at boot time or at
> + module load time. The parameters look like "video=pvr2:XXX", where
> + the meaning of XXX can be found at the end of the main source file
> + (<file:drivers/video/pvr2fb.c>). Please see the file
> + <file:Documentation/fb/pvr2fb.txt>.
> +
> +config FB_OPENCORES
> + tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
> + depends on FB
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This enables support for the OpenCores VGA/LCD core.
> +
> + The OpenCores VGA/LCD core is typically used together with
> + softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
> + systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
> +
> + The source code and specification for the core is available at
> + <http://opencores.org/project,vga_lcd>
> +
> +config FB_S1D13XXX
> + tristate "Epson S1D13XXX framebuffer support"
> + depends on FB
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Support for S1D13XXX framebuffer device family (currently only
> + working with S1D13806). Product specs at
> + <http://vdc.epson.com/>
> +
> +config FB_ATMEL
> + tristate "AT91/AT32 LCD Controller support"
> + depends on FB && HAVE_FB_ATMEL
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> + help
> + This enables support for the AT91/AT32 LCD Controller.
> +
> +config FB_INTSRAM
> + bool "Frame Buffer in internal SRAM"
> + depends on FB_ATMEL && ARCH_AT91SAM9261
> + help
> + Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
> + to let frame buffer in external SDRAM.
> +
> +config FB_ATMEL_STN
> + bool "Use a STN display with AT91/AT32 LCD Controller"
> + depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
> + default n
> + help
> + Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
> + Controller. Say N if you want to connect a TFT.
> +
> + If unsure, say N.
> +
> +config FB_NVIDIA
> + tristate "nVidia Framebuffer Support"
> + depends on FB && PCI
> + select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select BITREVERSE
> + select VGASTATE
> + help
> + This driver supports graphics boards with the nVidia chips, TNT
> + and newer. For very old chipsets, such as the RIVA128, then use
> + the rivafb.
> + Say Y if you have such a graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called nvidiafb.
> +
> +config FB_NVIDIA_I2C
> + bool "Enable DDC Support"
> + depends on FB_NVIDIA
> + select FB_DDC
> + help
> + This enables I2C support for nVidia Chipsets. This is used
> + only for getting EDID information from the attached display
> + allowing for robust video mode handling and switching.
> +
> + Because fbdev-2.6 requires that drivers must be able to
> + independently validate video mode parameters, you should say Y
> + here.
> +
> +config FB_NVIDIA_DEBUG
> + bool "Lots of debug output"
> + depends on FB_NVIDIA
> + default n
> + help
> + Say Y here if you want the nVidia driver to output all sorts
> + of debugging information to provide to the maintainer when
> + something goes wrong.
> +
> +config FB_NVIDIA_BACKLIGHT
> + bool "Support for backlight control"
> + depends on FB_NVIDIA
> + default y
> + help
> + Say Y here if you want to control the backlight of your display.
> +
> +config FB_RIVA
> + tristate "nVidia Riva support"
> + depends on FB && PCI
> + select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select BITREVERSE
> + select VGASTATE
> + help
> + This driver supports graphics boards with the nVidia Riva/Geforce
> + chips.
> + Say Y if you have such a graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called rivafb.
> +
> +config FB_RIVA_I2C
> + bool "Enable DDC Support"
> + depends on FB_RIVA
> + select FB_DDC
> + help
> + This enables I2C support for nVidia Chipsets. This is used
> + only for getting EDID information from the attached display
> + allowing for robust video mode handling and switching.
> +
> + Because fbdev-2.6 requires that drivers must be able to
> + independently validate video mode parameters, you should say Y
> + here.
> +
> +config FB_RIVA_DEBUG
> + bool "Lots of debug output"
> + depends on FB_RIVA
> + default n
> + help
> + Say Y here if you want the Riva driver to output all sorts
> + of debugging information to provide to the maintainer when
> + something goes wrong.
> +
> +config FB_RIVA_BACKLIGHT
> + bool "Support for backlight control"
> + depends on FB_RIVA
> + default y
> + help
> + Say Y here if you want to control the backlight of your display.
> +
> +config FB_I740
> + tristate "Intel740 support"
> + depends on FB && PCI
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VGASTATE
> + select FB_DDC
> + help
> + This driver supports graphics cards based on Intel740 chip.
> +
> +config FB_I810
> + tristate "Intel 810/815 support"
> + depends on FB && PCI && X86_32 && AGP_INTEL
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VGASTATE
> + help
> + This driver supports the on-board graphics built in to the Intel 810
> + and 815 chipsets. Say Y if you have and plan to use such a board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called i810fb.
> +
> + For more information, please read
> + <file:Documentation/fb/intel810.txt>
> +
> +config FB_I810_GTF
> + bool "use VESA Generalized Timing Formula"
> + depends on FB_I810
> + help
> + If you say Y, then the VESA standard, Generalized Timing Formula
> + or GTF, will be used to calculate the required video timing values
> + per video mode. Since the GTF allows nondiscrete timings
> + (nondiscrete being a range of values as opposed to discrete being a
> + set of values), you'll be able to use any combination of horizontal
> + and vertical resolutions, and vertical refresh rates without having
> + to specify your own timing parameters. This is especially useful
> + to maximize the performance of an aging display, or if you just
> + have a display with nonstandard dimensions. A VESA compliant
> + monitor is recommended, but can still work with non-compliant ones.
> + If you need or want this, then select this option. The timings may
> + not be compliant with Intel's recommended values. Use at your own
> + risk.
> +
> + If you say N, the driver will revert to discrete video timings
> + using a set recommended by Intel in their documentation.
> +
> + If unsure, say N.
> +
> +config FB_I810_I2C
> + bool "Enable DDC Support"
> + depends on FB_I810 && FB_I810_GTF
> + select FB_DDC
> + help
> +
> +config FB_LE80578
> + tristate "Intel LE80578 (Vermilion) support"
> + depends on FB && PCI && X86
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This driver supports the LE80578 (Vermilion Range) chipset
> +
> +config FB_CARILLO_RANCH
> + tristate "Intel Carillo Ranch support"
> + depends on FB_LE80578 && FB && PCI && X86
> + help
> + This driver supports the LE80578 (Carillo Ranch) board
> +
> +config FB_INTEL
> + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
> + depends on FB && PCI && X86 && AGP_INTEL && EXPERT
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
> + depends on !DRM_I915
> + help
> + This driver supports the on-board graphics built in to the Intel
> + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
> + Say Y if you have and plan to use such a board.
> +
> + To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called intelfb.
> +
> + For more information, please read <file:Documentation/fb/intelfb.txt>
> +
> +config FB_INTEL_DEBUG
> + bool "Intel driver Debug Messages"
> + depends on FB_INTEL
> + ---help---
> + Say Y here if you want the Intel driver to output all sorts
> + of debugging information to provide to the maintainer when
> + something goes wrong.
> +
> +config FB_INTEL_I2C
> + bool "DDC/I2C for Intel framebuffer support"
> + depends on FB_INTEL
> + select FB_DDC
> + default y
> + help
> + Say Y here if you want DDC/I2C support for your on-board Intel graphics.
> +
> +config FB_MATROX
> + tristate "Matrox acceleration"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_TILEBLITTING
> + select FB_MACMODES if PPC_PMAC
> + ---help---
> + Say Y here if you have a Matrox Millennium, Matrox Millennium II,
> + Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
> + Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
> + Matrox G400, G450 or G550 card in your box.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called matroxfb.
> +
> + You can pass several parameters to the driver at boot time or at
> + module load time. The parameters look like "video=matroxfb:XXX", and
> + are described in <file:Documentation/fb/matroxfb.txt>.
> +
> +config FB_MATROX_MILLENIUM
> + bool "Millennium I/II support"
> + depends on FB_MATROX
> + help
> + Say Y here if you have a Matrox Millennium or Matrox Millennium II
> + video card. If you select "Advanced lowlevel driver options" below,
> + you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
> + packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
> + also use font widths different from 8.
> +
> +config FB_MATROX_MYSTIQUE
> + bool "Mystique support"
> + depends on FB_MATROX
> + help
> + Say Y here if you have a Matrox Mystique or Matrox Mystique 220
> + video card. If you select "Advanced lowlevel driver options" below,
> + you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
> + packed pixel and 32 bpp packed pixel. You can also use font widths
> + different from 8.
> +
> +config FB_MATROX_G
> + bool "G100/G200/G400/G450/G550 support"
> + depends on FB_MATROX
> + ---help---
> + Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
> + video card. If you select "Advanced lowlevel driver options", you
> + should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
> + pixel and 32 bpp packed pixel. You can also use font widths
> + different from 8.
> +
> + If you need support for G400 secondary head, you must say Y to
> + "Matrox I2C support" and "G400 second head support" right below.
> + G450/G550 secondary head and digital output are supported without
> + additional modules.
> +
> + The driver starts in monitor mode. You must use the matroxset tool
> + (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
> + swap primary and secondary head outputs, or to change output mode.
> + Secondary head driver always start in 640x480 resolution and you
> + must use fbset to change it.
> +
> + Do not forget that second head supports only 16 and 32 bpp
> + packed pixels, so it is a good idea to compile them into the kernel
> + too. You can use only some font widths, as the driver uses generic
> + painting procedures (the secondary head does not use acceleration
> + engine).
> +
> + G450/G550 hardware can display TV picture only from secondary CRTC,
> + and it performs no scaling, so picture must have 525 or 625 lines.
> +
> +config FB_MATROX_I2C
> + tristate "Matrox I2C support"
> + depends on FB_MATROX
> + select FB_DDC
> + ---help---
> + This drivers creates I2C buses which are needed for accessing the
> + DDC (I2C) bus present on all Matroxes, an I2C bus which
> + interconnects Matrox optional devices, like MGA-TVO on G200 and
> + G400, and the secondary head DDC bus, present on G400 only.
> +
> + You can say Y or M here if you want to experiment with monitor
> + detection code. You must say Y or M here if you want to use either
> + second head of G400 or MGA-TVO on G200 or G400.
> +
> + If you compile it as module, it will create a module named
> + i2c-matroxfb.
> +
> +config FB_MATROX_MAVEN
> + tristate "G400 second head support"
> + depends on FB_MATROX_G && FB_MATROX_I2C
> + ---help---
> + WARNING !!! This support does not work with G450 !!!
> +
> + Say Y or M here if you want to use a secondary head (meaning two
> + monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
> + head is not compatible with accelerated XFree 3.3.x SVGA servers -
> + secondary head output is blanked while you are in X. With XFree
> + 3.9.17 preview you can use both heads if you use SVGA over fbdev or
> + the fbdev driver on first head and the fbdev driver on second head.
> +
> + If you compile it as module, two modules are created,
> + matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
> + both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
> + also load i2c-matroxfb to get it to run.
> +
> + The driver starts in monitor mode and you must use the matroxset
> + tool (available at
> + <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
> + PAL or NTSC or to swap primary and secondary head outputs.
> + Secondary head driver also always start in 640x480 resolution, you
> + must use fbset to change it.
> +
> + Also do not forget that second head supports only 16 and 32 bpp
> + packed pixels, so it is a good idea to compile them into the kernel
> + too. You can use only some font widths, as the driver uses generic
> + painting procedures (the secondary head does not use acceleration
> + engine).
> +
> +config FB_RADEON
> + tristate "ATI Radeon display support"
> + depends on FB && PCI
> + select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MACMODES if PPC_OF
> + help
> + Choose this option if you want to use an ATI Radeon graphics card as
> + a framebuffer device. There are both PCI and AGP versions. You
> + don't need to choose this to run the Radeon in plain VGA mode.
> +
> + There is a product page at
> + http://products.amd.com/en-us/GraphicCardResult.aspx
> +
> +config FB_RADEON_I2C
> + bool "DDC/I2C for ATI Radeon support"
> + depends on FB_RADEON
> + select FB_DDC
> + default y
> + help
> + Say Y here if you want DDC/I2C support for your Radeon board.
> +
> +config FB_RADEON_BACKLIGHT
> + bool "Support for backlight control"
> + depends on FB_RADEON
> + default y
> + help
> + Say Y here if you want to control the backlight of your display.
> +
> +config FB_RADEON_DEBUG
> + bool "Lots of debug output from Radeon driver"
> + depends on FB_RADEON
> + default n
> + help
> + Say Y here if you want the Radeon driver to output all sorts
> + of debugging information to provide to the maintainer when
> + something goes wrong.
> +
> +config FB_ATY128
> + tristate "ATI Rage128 display support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
> + select FB_MACMODES if PPC_PMAC
> + help
> + This driver supports graphics boards with the ATI Rage128 chips.
> + Say Y if you have such a graphics board and read
> + <file:Documentation/fb/aty128fb.txt>.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called aty128fb.
> +
> +config FB_ATY128_BACKLIGHT
> + bool "Support for backlight control"
> + depends on FB_ATY128
> + default y
> + help
> + Say Y here if you want to control the backlight of your display.
> +
> +config FB_ATY
> + tristate "ATI Mach64 display support" if PCI || ATARI
> + depends on FB && !SPARC32
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_BACKLIGHT if FB_ATY_BACKLIGHT
> + select FB_MACMODES if PPC
> + help
> + This driver supports graphics boards with the ATI Mach64 chips.
> + Say Y if you have such a graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called atyfb.
> +
> +config FB_ATY_CT
> + bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
> + depends on PCI && FB_ATY
> + default y if SPARC64 && PCI
> + help
> + Say Y here to support use of ATI's 64-bit Rage boards (or other
> + boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> + framebuffer device. The ATI product support page for these boards
> + is at <http://support.ati.com/products/pc/mach64/mach64.html>.
> +
> +config FB_ATY_GENERIC_LCD
> + bool "Mach64 generic LCD support"
> + depends on FB_ATY_CT
> + help
> + Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
> + Rage XC, or Rage XL chipset.
> +
> +config FB_ATY_GX
> + bool "Mach64 GX support" if PCI
> + depends on FB_ATY
> + default y if ATARI
> + help
> + Say Y here to support use of the ATI Mach64 Graphics Expression
> + board (or other boards based on the Mach64 GX chipset) as a
> + framebuffer device. The ATI product support page for these boards
> + is at
> + <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
> +
> +config FB_ATY_BACKLIGHT
> + bool "Support for backlight control"
> + depends on FB_ATY
> + default y
> + help
> + Say Y here if you want to control the backlight of your display.
> +
> +config FB_S3
> + tristate "S3 Trio/Virge support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_TILEBLITTING
> + select FB_SVGALIB
> + select VGASTATE
> + select FONT_8x16 if FRAMEBUFFER_CONSOLE
> + ---help---
> + Driver for graphics boards with S3 Trio / S3 Virge chip.
> +
> +config FB_S3_DDC
> + bool "DDC for S3 support"
> + depends on FB_S3
> + select FB_DDC
> + default y
> + help
> + Say Y here if you want DDC support for your S3 graphics card.
> +
> +config FB_SAVAGE
> + tristate "S3 Savage support"
> + depends on FB && PCI
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VGASTATE
> + help
> + This driver supports notebooks and computers with S3 Savage PCI/AGP
> + chips.
> +
> + Say Y if you have such a graphics card.
> +
> + To compile this driver as a module, choose M here; the module
> + will be called savagefb.
> +
> +config FB_SAVAGE_I2C
> + bool "Enable DDC2 Support"
> + depends on FB_SAVAGE
> + select FB_DDC
> + help
> + This enables I2C support for S3 Savage Chipsets. This is used
> + only for getting EDID information from the attached display
> + allowing for robust video mode handling and switching.
> +
> + Because fbdev-2.6 requires that drivers must be able to
> + independently validate video mode parameters, you should say Y
> + here.
> +
> +config FB_SAVAGE_ACCEL
> + bool "Enable Console Acceleration"
> + depends on FB_SAVAGE
> + default n
> + help
> + This option will compile in console acceleration support. If
> + the resulting framebuffer console has bothersome glitches, then
> + choose N here.
> +
> +config FB_SIS
> + tristate "SiS/XGI display support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_BOOT_VESA_SUPPORT if FB_SIS = y
> + help
> + This is the frame buffer device driver for the SiS 300, 315, 330
> + and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
> + Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
> +
> + To compile this driver as a module, choose M here; the module
> + will be called sisfb.
> +
> +config FB_SIS_300
> + bool "SiS 300 series support"
> + depends on FB_SIS
> + help
> + Say Y here to support use of the SiS 300/305, 540, 630 and 730.
> +
> +config FB_SIS_315
> + bool "SiS 315/330/340 series and XGI support"
> + depends on FB_SIS
> + help
> + Say Y here to support use of the SiS 315, 330 and 340 series
> + (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
> + as XGI V3XT, V5, V8 and Z7.
> +
> +config FB_VIA
> + tristate "VIA UniChrome (Pro) and Chrome9 display support"
> + depends on FB && PCI && X86
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select I2C_ALGOBIT
> + select I2C
> + select GPIOLIB
> + help
> + This is the frame buffer device driver for Graphics chips of VIA
> + UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
> + CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
> + /P4M900,VX800)
> + Say Y if you have a VIA UniChrome graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called viafb.
> +
> +if FB_VIA
> +
> +config FB_VIA_DIRECT_PROCFS
> + bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
> + depends on FB_VIA
> + default n
> + help
> + Allow direct hardware access to some output registers via procfs.
> + This is dangerous but may provide the only chance to get the
> + correct output device configuration.
> + Its use is strongly discouraged.
> +
> +config FB_VIA_X_COMPATIBILITY
> + bool "X server compatibility"
> + depends on FB_VIA
> + default n
> + help
> + This option reduces the functionality (power saving, ...) of the
> + framebuffer to avoid negative impact on the OpenChrome X server.
> + If you use any X server other than fbdev you should enable this
> + otherwise it should be safe to disable it and allow using all
> + features.
> +
> +endif
> +
> +config FB_NEOMAGIC
> + tristate "NeoMagic display support"
> + depends on FB && PCI
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VGASTATE
> + help
> + This driver supports notebooks with NeoMagic PCI chips.
> + Say Y if you have such a graphics card.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called neofb.
> +
> +config FB_KYRO
> + tristate "IMG Kyro support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
> + graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called kyrofb.
> +
> +config FB_3DFX
> + tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
> + depends on FB && PCI
> + select FB_CFB_IMAGEBLIT
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_MODE_HELPERS
> + help
> + This driver supports graphics boards with the 3Dfx Banshee,
> + Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
> + such a graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called tdfxfb.
> +
> +config FB_3DFX_ACCEL
> + bool "3Dfx Acceleration functions"
> + depends on FB_3DFX
> + ---help---
> + This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
> + device driver with acceleration functions.
> +
> +config FB_3DFX_I2C
> + bool "Enable DDC/I2C support"
> + depends on FB_3DFX
> + select FB_DDC
> + default y
> + help
> + Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
> +
> +config FB_VOODOO1
> + tristate "3Dfx Voodoo Graphics (sst1) support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
> + Voodoo2 (cvg) based graphics card.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sstfb.
> +
> + WARNING: Do not use any application that uses the 3D engine
> + (namely glide) while using this driver.
> + Please read the <file:Documentation/fb/sstfb.txt> for supported
> + options and other important info support.
> +
> +config FB_VT8623
> + tristate "VIA VT8623 support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_TILEBLITTING
> + select FB_SVGALIB
> + select VGASTATE
> + select FONT_8x16 if FRAMEBUFFER_CONSOLE
> + ---help---
> + Driver for CastleRock integrated graphics core in the
> + VIA VT8623 [Apollo CLE266] chipset.
> +
> +config FB_TRIDENT
> + tristate "Trident/CyberXXX/CyberBlade support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + This is the frame buffer device driver for Trident PCI/AGP chipsets.
> + Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
> + and Blade XP.
> + There are also integrated versions of these chips called CyberXXXX,
> + CyberImage or CyberBlade. These chips are mostly found in laptops
> + but also on some motherboards including early VIA EPIA motherboards.
> + For more information, read <file:Documentation/fb/tridentfb.txt>
> +
> + Say Y if you have such a graphics board.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called tridentfb.
> +
> +config FB_ARK
> + tristate "ARK 2000PV support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_TILEBLITTING
> + select FB_SVGALIB
> + select VGASTATE
> + select FONT_8x16 if FRAMEBUFFER_CONSOLE
> + ---help---
> + Driver for PCI graphics boards with ARK 2000PV chip
> + and ICS 5342 RAMDAC.
> +
> +config FB_PM3
> + tristate "Permedia3 support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the 3DLabs Permedia3
> + chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
> + similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
> + and maybe other boards.
> +
> +config FB_CARMINE
> + tristate "Fujitsu carmine frame buffer support"
> + depends on FB && PCI
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Fujitsu Carmine chip.
> + The driver provides two independent frame buffer devices.
> +
> +choice
> + depends on FB_CARMINE
> + prompt "DRAM timing"
> + default FB_CARMINE_DRAM_EVAL
> +
> +config FB_CARMINE_DRAM_EVAL
> + bool "Eval board timings"
> + help
> + Use timings which work on the eval card.
> +
> +config CARMINE_DRAM_CUSTOM
> + bool "Custom board timings"
> + help
> + Use custom board timings.
> +endchoice
> +
> +config FB_AU1100
> + bool "Au1100 LCD Driver"
> + depends on (FB = y) && MIPS_ALCHEMY
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the framebuffer driver for the AMD Au1100 SOC. It can drive
> + various panels and CRTs by passing in kernel cmd line option
> + au1100fb:panel=<name>.
> +
> +config FB_AU1200
> + bool "Au1200/Au1300 LCD Driver"
> + depends on (FB = y) && MIPS_ALCHEMY
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + help
> + This is the framebuffer driver for the Au1200/Au1300 SOCs.
> + It can drive various panels and CRTs by passing in kernel cmd line
> + option au1200fb:panel=<name>.
> +
> +config FB_VT8500
> + bool "VIA VT8500 framebuffer support"
> + depends on (FB = y) && ARM && ARCH_VT8500
> + select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
> + select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
> + select FB_SYS_IMAGEBLIT
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> + help
> + This is the framebuffer driver for VIA VT8500 integrated LCD
> + controller.
> +
> +config FB_WM8505
> + bool "Wondermedia WM8xxx-series frame buffer support"
> + depends on (FB = y) && ARM && ARCH_VT8500
> + select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
> + select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
> + select FB_SYS_IMAGEBLIT
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> + help
> + This is the framebuffer driver for WonderMedia WM8xxx-series
> + integrated LCD controller. This driver covers the WM8505, WM8650
> + and WM8850 SoCs.
> +
> +config FB_WMT_GE_ROPS
> + bool "VT8500/WM8xxx accelerated raster ops support"
> + depends on (FB = y) && (FB_VT8500 || FB_WM8505)
> + default n
> + help
> + This adds support for accelerated raster operations on the
> + VIA VT8500 and Wondermedia 85xx series SoCs.
> +
> +source "drivers/video/fbdev/geode/Kconfig"
> +
> +config FB_HIT
> + tristate "HD64461 Frame Buffer support"
> + depends on FB && HD64461
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This is the frame buffer device driver for the Hitachi HD64461 LCD
> + frame buffer card.
> +
> +config FB_PMAG_AA
> + bool "PMAG-AA TURBOchannel framebuffer support"
> + depends on (FB = y) && TC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
> + used mainly in the MIPS-based DECstation series.
> +
> +config FB_PMAG_BA
> + tristate "PMAG-BA TURBOchannel framebuffer support"
> + depends on FB && TC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
> + used mainly in the MIPS-based DECstation series.
> +
> +config FB_PMAGB_B
> + tristate "PMAGB-B TURBOchannel framebuffer support"
> + depends on FB && TC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Support for the PMAGB-B TURBOchannel framebuffer card used mainly
> + in the MIPS-based DECstation series. The card is currently only
> + supported in 1280x1024x8 mode.
> +
> +config FB_MAXINE
> + bool "Maxine (Personal DECstation) onboard framebuffer support"
> + depends on (FB = y) && MACH_DECSTATION
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Support for the onboard framebuffer (1024x768x8) in the Personal
> + DECstation series (Personal DECstation 5000/20, /25, /33, /50,
> + Codename "Maxine").
> +
> +config FB_G364
> + bool "G364 frame buffer support"
> + depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + The G364 driver is the framebuffer used in MIPS Magnum 4000 and
> + Olivetti M700-10 systems.
> +
> +config FB_68328
> + bool "Motorola 68328 native frame buffer support"
> + depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Say Y here if you want to support the built-in frame buffer of
> + the Motorola 68328 CPU family.
> +
> +config FB_PXA168
> + tristate "PXA168/910 LCD framebuffer support"
> + depends on FB && (CPU_PXA168 || CPU_PXA910)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in LCD controller in the Marvell
> + MMP processor.
> +
> +config FB_PXA
> + tristate "PXA LCD framebuffer support"
> + depends on FB && ARCH_PXA
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in LCD controller in the Intel
> + PXA2x0 processor.
> +
> + This driver is also available as a module ( = code which can be
> + inserted and removed from the running kernel whenever you want). The
> + module will be called pxafb. If you want to compile it as a module,
> + say M here and read <file:Documentation/kbuild/modules.txt>.
> +
> + If unsure, say N.
> +
> +config FB_PXA_OVERLAY
> + bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
> + default n
> + depends on FB_PXA && (PXA27x || PXA3xx)
> +
> +config FB_PXA_SMARTPANEL
> + bool "PXA Smartpanel LCD support"
> + default n
> + depends on FB_PXA
> +
> +config FB_PXA_PARAMETERS
> + bool "PXA LCD command line parameters"
> + default n
> + depends on FB_PXA
> + ---help---
> + Enable the use of kernel command line or module parameters
> + to configure the physical properties of the LCD panel when
> + using the PXA LCD driver.
> +
> + This option allows you to override the panel parameters
> + supplied by the platform in order to support multiple
> + different models of flatpanel. If you will only be using a
> + single model of flatpanel then you can safely leave this
> + option disabled.
> +
> + <file:Documentation/fb/pxafb.txt> describes the available parameters.
> +
> +config PXA3XX_GCU
> + tristate "PXA3xx 2D graphics accelerator driver"
> + depends on FB_PXA
> + help
> + Kernelspace driver for the 2D graphics controller unit (GCU)
> + found on PXA3xx processors. There is a counterpart driver in the
> + DirectFB suite, see http://www.directfb.org/
> +
> + If you compile this as a module, it will be called pxa3xx_gcu.
> +
> +config FB_MBX
> + tristate "2700G LCD framebuffer support"
> + depends on FB && ARCH_PXA
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Framebuffer driver for the Intel 2700G (Marathon) Graphics
> + Accelerator
> +
> +config FB_MBX_DEBUG
> + bool "Enable debugging info via debugfs"
> + depends on FB_MBX && DEBUG_FS
> + default n
> + ---help---
> + Enable this if you want debugging information using the debug
> + filesystem (debugfs)
> +
> + If unsure, say N.
> +
> +config FB_FSL_DIU
> + tristate "Freescale DIU framebuffer support"
> + depends on FB && FSL_SOC
> + select FB_MODE_HELPERS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select PPC_LIB_RHEAP
> + ---help---
> + Framebuffer driver for the Freescale SoC DIU
> +
> +config FB_W100
> + tristate "W100 frame buffer support"
> + depends on FB && ARCH_PXA
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
> + It can also drive the w3220 chip found on iPAQ hx4700.
> +
> + This driver is also available as a module ( = code which can be
> + inserted and removed from the running kernel whenever you want). The
> + module will be called w100fb. If you want to compile it as a module,
> + say M here and read <file:Documentation/kbuild/modules.txt>.
> +
> + If unsure, say N.
> +
> +config FB_SH_MOBILE_LCDC
> + tristate "SuperH Mobile LCDC framebuffer support"
> + depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + select FB_BACKLIGHT
> + select SH_MIPI_DSI if SH_LCD_MIPI_DSI
> + ---help---
> + Frame buffer driver for the on-chip SH-Mobile LCD controller.
> +
> +config FB_SH_MOBILE_HDMI
> + tristate "SuperH Mobile HDMI controller support"
> + depends on FB_SH_MOBILE_LCDC
> + select FB_MODE_HELPERS
> + select SOUND
> + select SND
> + select SND_SOC
> + ---help---
> + Driver for the on-chip SH-Mobile HDMI controller.
> +
> +config FB_TMIO
> + tristate "Toshiba Mobile IO FrameBuffer support"
> + depends on FB && MFD_CORE
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the Toshiba Mobile IO integrated as found
> + on the Sharp SL-6000 series
> +
> + This driver is also available as a module ( = code which can be
> + inserted and removed from the running kernel whenever you want). The
> + module will be called tmiofb. If you want to compile it as a module,
> + say M here and read <file:Documentation/kbuild/modules.txt>.
> +
> + If unsure, say N.
> +
> +config FB_TMIO_ACCELL
> + bool "tmiofb acceleration"
> + depends on FB_TMIO
> + default y
> +
> +config FB_S3C
> + tristate "Samsung S3C framebuffer support"
> + depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
> + ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in FB controller in the Samsung
> + SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
> + and the S3C64XX series such as the S3C6400 and S3C6410.
> +
> + These chips all have the same basic framebuffer design with the
> + actual capabilities depending on the chip. For instance the S3C6400
> + and S3C6410 support 4 hardware windows whereas the S3C24XX series
> + currently only have two.
> +
> + Currently the support is only for the S3C6400 and S3C6410 SoCs.
> +
> +config FB_S3C_DEBUG_REGWRITE
> + bool "Debug register writes"
> + depends on FB_S3C
> + ---help---
> + Show all register writes via pr_debug()
> +
> +config FB_S3C2410
> + tristate "S3C2410 LCD framebuffer support"
> + depends on FB && ARCH_S3C24XX
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in LCD controller in the Samsung
> + S3C2410 processor.
> +
> + This driver is also available as a module ( = code which can be
> + inserted and removed from the running kernel whenever you want). The
> + module will be called s3c2410fb. If you want to compile it as a module,
> + say M here and read <file:Documentation/kbuild/modules.txt>.
> +
> + If unsure, say N.
> +config FB_S3C2410_DEBUG
> + bool "S3C2410 lcd debug messages"
> + depends on FB_S3C2410
> + help
> + Turn on debugging messages. Note that you can set/unset at run time
> + through sysfs
> +
> +config FB_NUC900
> + bool "NUC900 LCD framebuffer support"
> + depends on FB && ARCH_W90X900
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in LCD controller in the Nuvoton
> + NUC900 processor
> +
> +config GPM1040A0_320X240
> + bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
> + depends on FB_NUC900
> +
> +config FB_SM501
> + tristate "Silicon Motion SM501 framebuffer support"
> + depends on FB && MFD_SM501
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the CRT and LCD controllers in the Silicon
> + Motion SM501.
> +
> + This driver is also available as a module ( = code which can be
> + inserted and removed from the running kernel whenever you want). The
> + module will be called sm501fb. If you want to compile it as a module,
> + say M here and read <file:Documentation/kbuild/modules.txt>.
> +
> + If unsure, say N.
> +
> +config FB_SMSCUFX
> + tristate "SMSC UFX6000/7000 USB Framebuffer support"
> + depends on FB && USB
> + select FB_MODE_HELPERS
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + ---help---
> + This is a kernel framebuffer driver for SMSC UFX USB devices.
> + Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
> + mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
> + (USB 3.0) devices.
> + To compile as a module, choose M here: the module name is smscufx.
> +
> +config FB_UDL
> + tristate "Displaylink USB Framebuffer support"
> + depends on FB && USB
> + select FB_MODE_HELPERS
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + ---help---
> + This is a kernel framebuffer driver for DisplayLink USB devices.
> + Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
> + mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
> + To compile as a module, choose M here: the module name is udlfb.
> +
> +config FB_IBM_GXT4500
> + tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
> + depends on FB && PPC
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Say Y here to enable support for the IBM GXT4000P/6000P and
> + GXT4500P/6500P display adaptor based on Raster Engine RC1000,
> + found on some IBM System P (pSeries) machines. This driver
> + doesn't use Geometry Engine GT1000.
> +
> +config FB_PS3
> + tristate "PS3 GPU framebuffer driver"
> + depends on FB && PS3_PS3AV
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
> + ---help---
> + Include support for the virtual frame buffer in the PS3 platform.
> +
> +config FB_PS3_DEFAULT_SIZE_M
> + int "PS3 default frame buffer size (in MiB)"
> + depends on FB_PS3
> + default 9
> + ---help---
> + This is the default size (in MiB) of the virtual frame buffer in
> + the PS3.
> + The default value can be overridden on the kernel command line
> + using the "ps3fb" option (e.g. "ps3fb=9M");
> +
> +config FB_XILINX
> + tristate "Xilinx frame buffer support"
> + depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Include support for the Xilinx ML300/ML403 reference design
> + framebuffer. ML300 carries a 640*480 LCD display on the board,
> + ML403 uses a standard DB15 VGA connector.
> +
> +config FB_GOLDFISH
> + tristate "Goldfish Framebuffer"
> + depends on FB && HAS_DMA
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Framebuffer driver for Goldfish Virtual Platform
> +
> +config FB_COBALT
> + tristate "Cobalt server LCD frame buffer support"
> + depends on FB && (MIPS_COBALT || MIPS_SEAD3)
> +
> +config FB_SH7760
> + bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
> + depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
> + || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Support for the SH7760/SH7763/SH7720/SH7721 integrated
> + (D)STN/TFT LCD Controller.
> + Supports display resolutions up to 1024x1024 pixel, grayscale and
> + color operation, with depths ranging from 1 bpp to 8 bpp monochrome
> + and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
> + panels <= 320 pixel horizontal resolution.
> +
> +config FB_DA8XX
> + tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
> + depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_CFB_REV_PIXELS_IN_BYTE
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> + ---help---
> + This is the frame buffer device driver for the TI LCD controller
> + found on DA8xx/OMAP-L1xx/AM335x SoCs.
> + If unsure, say N.
> +
> +config FB_VIRTUAL
> + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
> + depends on FB
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + ---help---
> + This is a `virtual' frame buffer device. It operates on a chunk of
> + unswappable kernel memory instead of on the memory of a graphics
> + board. This means you cannot see any output sent to this frame
> + buffer device, while it does consume precious memory. The main use
> + of this frame buffer device is testing and debugging the frame
> + buffer subsystem. Do NOT enable it for normal systems! To protect
> + the innocent, it has to be enabled explicitly at boot time using the
> + kernel option `video=vfb:'.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called vfb. In order to load it, you must use
> + the vfb_enable=1 option.
> +
> + If unsure, say N.
> +
> +config XEN_FBDEV_FRONTEND
> + tristate "Xen virtual frame buffer support"
> + depends on FB && XEN
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
> + select XEN_XENBUS_FRONTEND
> + default y
> + help
> + This driver implements the front-end of the Xen virtual
> + frame buffer driver. It communicates with a back-end
> + in another domain.
> +
> +config FB_METRONOME
> + tristate "E-Ink Metronome/8track controller support"
> + depends on FB
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + help
> + This driver implements support for the E-Ink Metronome
> + controller. The pre-release name for this device was 8track
> + and could also have been called by some vendors as PVI-nnnn.
> +
> +config FB_MB862XX
> + tristate "Fujitsu MB862xx GDC support"
> + depends on FB
> + depends on PCI || (OF && PPC)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
> +
> +choice
> + prompt "GDC variant"
> + depends on FB_MB862XX
> +
> +config FB_MB862XX_PCI_GDC
> + bool "Carmine/Coral-P(A) GDC"
> + depends on PCI
> + ---help---
> + This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
> + PCI graphics controller devices.
> +
> +config FB_MB862XX_LIME
> + bool "Lime GDC"
> + depends on OF && PPC
> + select FB_FOREIGN_ENDIAN
> + select FB_LITTLE_ENDIAN
> + ---help---
> + Framebuffer support for Fujitsu Lime GDC on host CPU bus.
> +
> +endchoice
> +
> +config FB_MB862XX_I2C
> + bool "Support I2C bus on MB862XX GDC"
> + depends on FB_MB862XX && I2C
> + default y
> + help
> + Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
> + driver to support accessing I2C devices on controller's I2C bus.
> + These are usually some video decoder chips.
> +
> +config FB_EP93XX
> + tristate "EP93XX frame buffer support"
> + depends on FB && ARCH_EP93XX
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Framebuffer driver for the Cirrus Logic EP93XX series of processors.
> + This driver is also available as a module. The module will be called
> + ep93xx-fb.
> +
> +config FB_PRE_INIT_FB
> + bool "Don't reinitialize, use bootloader's GDC/Display configuration"
> + depends on FB && FB_MB862XX_LIME
> + ---help---
> + Select this option if display contents should be inherited as set by
> + the bootloader.
> +
> +config FB_MSM
> + tristate "MSM Framebuffer support"
> + depends on FB && ARCH_MSM
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> +
> +config FB_MX3
> + tristate "MX3 Framebuffer support"
> + depends on FB && MX3_IPU
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + default y
> + help
> + This is a framebuffer device for the i.MX31 LCD Controller. So
> + far only synchronous displays are supported. If you plan to use
> + an LCD display with your i.MX31 system, say Y here.
> +
> +config FB_BROADSHEET
> + tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
> + depends on FB
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + help
> + This driver implements support for the E-Ink Broadsheet
> + controller. The release name for this device was Epson S1D13521
> + and could also have been called by other names when coupled with
> + a bridge adapter.
> +
> +config FB_AUO_K190X
> + tristate "AUO-K190X EPD controller support"
> + depends on FB
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + select FB_DEFERRED_IO
> + help
> + Provides support for epaper controllers from the K190X series
> + of AUO. These controllers can be used to drive epaper displays
> + from Sipix.
> +
> + This option enables the common support, shared by the individual
> + controller drivers. You will also have to enable the driver
> + for the controller type used in your device.
> +
> +config FB_AUO_K1900
> + tristate "AUO-K1900 EPD controller support"
> + depends on FB && FB_AUO_K190X
> + help
> + This driver implements support for the AUO K1900 epd-controller.
> + This controller can drive Sipix epaper displays but can only do
> + serial updates, reducing the number of possible frames per second.
> +
> +config FB_AUO_K1901
> + tristate "AUO-K1901 EPD controller support"
> + depends on FB && FB_AUO_K190X
> + help
> + This driver implements support for the AUO K1901 epd-controller.
> + This controller can drive Sipix epaper displays and supports
> + concurrent updates, making higher frames per second possible.
> +
> +config FB_JZ4740
> + tristate "JZ4740 LCD framebuffer support"
> + depends on FB && MACH_JZ4740
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + help
> + Framebuffer support for the JZ4740 SoC.
> +
> +config FB_MXS
> + tristate "MXS LCD framebuffer support"
> + depends on FB && ARCH_MXS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select FB_MODE_HELPERS
> + select VIDEOMODE_HELPERS
> + help
> + Framebuffer support for the MXS SoC.
> +
> +config FB_PUV3_UNIGFX
> + tristate "PKUnity v3 Unigfx framebuffer support"
> + depends on FB && UNICORE32 && ARCH_PUV3
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_SYS_FOPS
> + help
> + Choose this option if you want to use the Unigfx device as a
> + framebuffer device. Without the support of PCI & AGP.
> +
> +config FB_HYPERV
> + tristate "Microsoft Hyper-V Synthetic Video support"
> + depends on FB && HYPERV
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
> +
> +config FB_SIMPLE
> + bool "Simple framebuffer support"
> + depends on (FB = y)
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Say Y if you want support for a simple frame-buffer.
> +
> + This driver assumes that the display hardware has been initialized
> + before the kernel boots, and the kernel will simply render to the
> + pre-allocated frame buffer surface.
> +
> + Configuration re: surface address, size, and format must be provided
> + through device tree, or plain old platform data.
> +
> +source "drivers/video/fbdev/omap/Kconfig"
> +source "drivers/video/fbdev/omap2/Kconfig"
> +source "drivers/video/fbdev/exynos/Kconfig"
> +source "drivers/video/fbdev/mmp/Kconfig"
> +
> +config FB_SH_MOBILE_MERAM
> + tristate "SuperH Mobile MERAM read ahead support"
> + depends on (SUPERH || ARCH_SHMOBILE)
> + select GENERIC_ALLOCATOR
> + ---help---
> + Enable MERAM support for the SuperH controller.
> +
> + This will allow for caching of the framebuffer to provide more
> + reliable access under heavy main memory bus traffic situations.
> + Up to 4 memory channels can be configured, allowing 4 RGB or
> + 2 YCbCr framebuffers to be configured.
> +
> +config FB_SSD1307
> + tristate "Solomon SSD1307 framebuffer support"
> + depends on FB && I2C
> + depends on OF
> + depends on GPIOLIB
> + select FB_SYS_FOPS
> + select FB_SYS_FILLRECT
> + select FB_SYS_COPYAREA
> + select FB_SYS_IMAGEBLIT
> + select FB_DEFERRED_IO
> + select PWM
> + help
> + This driver implements support for the Solomon SSD1307
> + OLED controller over I2C.
> diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> new file mode 100644
> index 000000000000..616e0975ae6e
> --- /dev/null
> +++ b/drivers/video/fbdev/Makefile
> @@ -0,0 +1,167 @@
> +# Makefile for the Linux video drivers.
> +# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
> +# Rewritten to use lists instead of if-statements.
> +
> +# Each configuration option enables a list of files.
> +
> +obj-y += fb_notify.o
> +obj-$(CONFIG_FB) += fb.o
> +fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
> + modedb.o fbcvt.o
> +fb-objs := $(fb-y)
> +
> +obj-$(CONFIG_EXYNOS_VIDEO) += exynos/
> +
> +obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
> +obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
> +obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
> +obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
> +obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
> +obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
> +obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
> +obj-$(CONFIG_FB_SVGALIB) += svgalib.o
> +obj-$(CONFIG_FB_MACMODES) += macmodes.o
> +obj-$(CONFIG_FB_DDC) += fb_ddc.o
> +obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
> +obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
> +
> +# Hardware specific drivers go first
> +obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
> +obj-$(CONFIG_FB_ARC) += arcfb.o
> +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
> +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
> +obj-$(CONFIG_FB_GRVGA) += grvga.o
> +obj-$(CONFIG_FB_PM2) += pm2fb.o
> +obj-$(CONFIG_FB_PM3) += pm3fb.o
> +
> +obj-$(CONFIG_FB_I740) += i740fb.o
> +obj-$(CONFIG_FB_MATROX) += matrox/
> +obj-$(CONFIG_FB_RIVA) += riva/
> +obj-$(CONFIG_FB_NVIDIA) += nvidia/
> +obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
> +obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
> +obj-$(CONFIG_FB_RADEON) += aty/
> +obj-$(CONFIG_FB_SIS) += sis/
> +obj-$(CONFIG_FB_VIA) += via/
> +obj-$(CONFIG_FB_KYRO) += kyro/
> +obj-$(CONFIG_FB_SAVAGE) += savage/
> +obj-$(CONFIG_FB_GEODE) += geode/
> +obj-$(CONFIG_FB_MBX) += mbx/
> +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
> +obj-$(CONFIG_FB_3DFX) += tdfxfb.o
> +obj-$(CONFIG_FB_CONTROL) += controlfb.o
> +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
> +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
> +obj-$(CONFIG_FB_CT65550) += chipsfb.o
> +obj-$(CONFIG_FB_IMSTT) += imsttfb.o
> +obj-$(CONFIG_FB_FM2) += fm2fb.o
> +obj-$(CONFIG_FB_VT8623) += vt8623fb.o
> +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
> +obj-$(CONFIG_FB_LE80578) += vermilion/
> +obj-$(CONFIG_FB_S3) += s3fb.o
> +obj-$(CONFIG_FB_ARK) += arkfb.o
> +obj-$(CONFIG_FB_STI) += stifb.o
> +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
> +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
> +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
> +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
> +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
> +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
> +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
> +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
> +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
> +obj-$(CONFIG_FB_ACORN) += acornfb.o
> +obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
> + atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
> +obj-$(CONFIG_FB_MAC) += macfb.o
> +obj-$(CONFIG_FB_HECUBA) += hecubafb.o
> +obj-$(CONFIG_FB_N411) += n411.o
> +obj-$(CONFIG_FB_HGA) += hgafb.o
> +obj-$(CONFIG_FB_XVR500) += sunxvr500.o
> +obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
> +obj-$(CONFIG_FB_XVR1000) += sunxvr1000.o
> +obj-$(CONFIG_FB_IGA) += igafb.o
> +obj-$(CONFIG_FB_APOLLO) += dnfb.o
> +obj-$(CONFIG_FB_Q40) += q40fb.o
> +obj-$(CONFIG_FB_TGA) += tgafb.o
> +obj-$(CONFIG_FB_HP300) += hpfb.o
> +obj-$(CONFIG_FB_G364) += g364fb.o
> +obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o
> +obj-$(CONFIG_FB_SA1100) += sa1100fb.o
> +obj-$(CONFIG_FB_HIT) += hitfb.o
> +obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
> +obj-$(CONFIG_FB_PVR2) += pvr2fb.o
> +obj-$(CONFIG_FB_VOODOO1) += sstfb.o
> +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
> +obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
> +obj-$(CONFIG_FB_68328) += 68328fb.o
> +obj-$(CONFIG_FB_GBE) += gbefb.o
> +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
> +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
> +obj-$(CONFIG_FB_PXA) += pxafb.o
> +obj-$(CONFIG_FB_PXA168) += pxa168fb.o
> +obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
> +obj-$(CONFIG_MMP_DISP) += mmp/
> +obj-$(CONFIG_FB_W100) += w100fb.o
> +obj-$(CONFIG_FB_TMIO) += tmiofb.o
> +obj-$(CONFIG_FB_AU1100) += au1100fb.o
> +obj-$(CONFIG_FB_AU1200) += au1200fb.o
> +obj-$(CONFIG_FB_VT8500) += vt8500lcdfb.o
> +obj-$(CONFIG_FB_WM8505) += wm8505fb.o
> +obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
> +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
> +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
> +obj-$(CONFIG_FB_MAXINE) += maxinefb.o
> +obj-$(CONFIG_FB_METRONOME) += metronomefb.o
> +obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
> +obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
> +obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
> +obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
> +obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
> +obj-$(CONFIG_FB_SH7760) += sh7760fb.o
> +obj-$(CONFIG_FB_IMX) += imxfb.o
> +obj-$(CONFIG_FB_S3C) += s3c-fb.o
> +obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
> +obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
> +obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
> +obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
> +obj-$(CONFIG_FB_PS3) += ps3fb.o
> +obj-$(CONFIG_FB_SM501) += sm501fb.o
> +obj-$(CONFIG_FB_UDL) += udlfb.o
> +obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
> +obj-$(CONFIG_FB_XILINX) += xilinxfb.o
> +obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
> +obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
> +obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o
> +obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
> +obj-$(CONFIG_FB_OMAP) += omap/
> +obj-y += omap2/
> +obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
> +obj-$(CONFIG_FB_CARMINE) += carminefb.o
> +obj-$(CONFIG_FB_MB862XX) += mb862xx/
> +obj-$(CONFIG_FB_MSM) += msm/
> +obj-$(CONFIG_FB_NUC900) += nuc900fb.o
> +obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
> +obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
> +obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
> +obj-$(CONFIG_FB_OPENCORES) += ocfb.o
> +
> +# Platform or fallback drivers go here
> +obj-$(CONFIG_FB_UVESA) += uvesafb.o
> +obj-$(CONFIG_FB_VESA) += vesafb.o
> +obj-$(CONFIG_FB_EFI) += efifb.o
> +obj-$(CONFIG_FB_VGA16) += vga16fb.o
> +obj-$(CONFIG_FB_OF) += offb.o
> +obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o
> +obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
> +obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
> +obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
> +obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
> +obj-$(CONFIG_FB_MX3) += mx3fb.o
> +obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
> +obj-$(CONFIG_FB_MXS) += mxsfb.o
> +obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
> +obj-$(CONFIG_FB_SIMPLE) += simplefb.o
> +
> +# the test framebuffer is last
> +obj-$(CONFIG_FB_VIRTUAL) += vfb.o
> diff --git a/drivers/video/acornfb.c b/drivers/video/fbdev/acornfb.c
> similarity index 100%
> rename from drivers/video/acornfb.c
> rename to drivers/video/fbdev/acornfb.c
> diff --git a/drivers/video/acornfb.h b/drivers/video/fbdev/acornfb.h
> similarity index 100%
> rename from drivers/video/acornfb.h
> rename to drivers/video/fbdev/acornfb.h
> diff --git a/drivers/video/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
> similarity index 100%
> rename from drivers/video/amba-clcd.c
> rename to drivers/video/fbdev/amba-clcd.c
> diff --git a/drivers/video/amifb.c b/drivers/video/fbdev/amifb.c
> similarity index 100%
> rename from drivers/video/amifb.c
> rename to drivers/video/fbdev/amifb.c
> diff --git a/drivers/video/arcfb.c b/drivers/video/fbdev/arcfb.c
> similarity index 100%
> rename from drivers/video/arcfb.c
> rename to drivers/video/fbdev/arcfb.c
> diff --git a/drivers/video/arkfb.c b/drivers/video/fbdev/arkfb.c
> similarity index 100%
> rename from drivers/video/arkfb.c
> rename to drivers/video/fbdev/arkfb.c
> diff --git a/drivers/video/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
> similarity index 100%
> rename from drivers/video/asiliantfb.c
> rename to drivers/video/fbdev/asiliantfb.c
> diff --git a/drivers/video/atafb.c b/drivers/video/fbdev/atafb.c
> similarity index 100%
> rename from drivers/video/atafb.c
> rename to drivers/video/fbdev/atafb.c
> diff --git a/drivers/video/atafb.h b/drivers/video/fbdev/atafb.h
> similarity index 100%
> rename from drivers/video/atafb.h
> rename to drivers/video/fbdev/atafb.h
> diff --git a/drivers/video/atafb_iplan2p2.c b/drivers/video/fbdev/atafb_iplan2p2.c
> similarity index 100%
> rename from drivers/video/atafb_iplan2p2.c
> rename to drivers/video/fbdev/atafb_iplan2p2.c
> diff --git a/drivers/video/atafb_iplan2p4.c b/drivers/video/fbdev/atafb_iplan2p4.c
> similarity index 100%
> rename from drivers/video/atafb_iplan2p4.c
> rename to drivers/video/fbdev/atafb_iplan2p4.c
> diff --git a/drivers/video/atafb_iplan2p8.c b/drivers/video/fbdev/atafb_iplan2p8.c
> similarity index 100%
> rename from drivers/video/atafb_iplan2p8.c
> rename to drivers/video/fbdev/atafb_iplan2p8.c
> diff --git a/drivers/video/atafb_mfb.c b/drivers/video/fbdev/atafb_mfb.c
> similarity index 100%
> rename from drivers/video/atafb_mfb.c
> rename to drivers/video/fbdev/atafb_mfb.c
> diff --git a/drivers/video/atafb_utils.h b/drivers/video/fbdev/atafb_utils.h
> similarity index 100%
> rename from drivers/video/atafb_utils.h
> rename to drivers/video/fbdev/atafb_utils.h
> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
> similarity index 100%
> rename from drivers/video/atmel_lcdfb.c
> rename to drivers/video/fbdev/atmel_lcdfb.c
> diff --git a/drivers/video/aty/Makefile b/drivers/video/fbdev/aty/Makefile
> similarity index 100%
> rename from drivers/video/aty/Makefile
> rename to drivers/video/fbdev/aty/Makefile
> diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/fbdev/aty/ati_ids.h
> similarity index 100%
> rename from drivers/video/aty/ati_ids.h
> rename to drivers/video/fbdev/aty/ati_ids.h
> diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
> similarity index 100%
> rename from drivers/video/aty/aty128fb.c
> rename to drivers/video/fbdev/aty/aty128fb.c
> diff --git a/drivers/video/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h
> similarity index 100%
> rename from drivers/video/aty/atyfb.h
> rename to drivers/video/fbdev/aty/atyfb.h
> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
> similarity index 100%
> rename from drivers/video/aty/atyfb_base.c
> rename to drivers/video/fbdev/aty/atyfb_base.c
> diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/fbdev/aty/mach64_accel.c
> similarity index 100%
> rename from drivers/video/aty/mach64_accel.c
> rename to drivers/video/fbdev/aty/mach64_accel.c
> diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c
> similarity index 100%
> rename from drivers/video/aty/mach64_ct.c
> rename to drivers/video/fbdev/aty/mach64_ct.c
> diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/fbdev/aty/mach64_cursor.c
> similarity index 100%
> rename from drivers/video/aty/mach64_cursor.c
> rename to drivers/video/fbdev/aty/mach64_cursor.c
> diff --git a/drivers/video/aty/mach64_gx.c b/drivers/video/fbdev/aty/mach64_gx.c
> similarity index 100%
> rename from drivers/video/aty/mach64_gx.c
> rename to drivers/video/fbdev/aty/mach64_gx.c
> diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/fbdev/aty/radeon_accel.c
> similarity index 100%
> rename from drivers/video/aty/radeon_accel.c
> rename to drivers/video/fbdev/aty/radeon_accel.c
> diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/fbdev/aty/radeon_backlight.c
> similarity index 100%
> rename from drivers/video/aty/radeon_backlight.c
> rename to drivers/video/fbdev/aty/radeon_backlight.c
> diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
> similarity index 100%
> rename from drivers/video/aty/radeon_base.c
> rename to drivers/video/fbdev/aty/radeon_base.c
> diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/fbdev/aty/radeon_i2c.c
> similarity index 100%
> rename from drivers/video/aty/radeon_i2c.c
> rename to drivers/video/fbdev/aty/radeon_i2c.c
> diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c
> similarity index 100%
> rename from drivers/video/aty/radeon_monitor.c
> rename to drivers/video/fbdev/aty/radeon_monitor.c
> diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c
> similarity index 100%
> rename from drivers/video/aty/radeon_pm.c
> rename to drivers/video/fbdev/aty/radeon_pm.c
> diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
> similarity index 100%
> rename from drivers/video/aty/radeonfb.h
> rename to drivers/video/fbdev/aty/radeonfb.h
> diff --git a/drivers/video/au1100fb.c b/drivers/video/fbdev/au1100fb.c
> similarity index 100%
> rename from drivers/video/au1100fb.c
> rename to drivers/video/fbdev/au1100fb.c
> diff --git a/drivers/video/au1100fb.h b/drivers/video/fbdev/au1100fb.h
> similarity index 100%
> rename from drivers/video/au1100fb.h
> rename to drivers/video/fbdev/au1100fb.h
> diff --git a/drivers/video/au1200fb.c b/drivers/video/fbdev/au1200fb.c
> similarity index 100%
> rename from drivers/video/au1200fb.c
> rename to drivers/video/fbdev/au1200fb.c
> diff --git a/drivers/video/au1200fb.h b/drivers/video/fbdev/au1200fb.h
> similarity index 100%
> rename from drivers/video/au1200fb.h
> rename to drivers/video/fbdev/au1200fb.h
> diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c
> similarity index 100%
> rename from drivers/video/auo_k1900fb.c
> rename to drivers/video/fbdev/auo_k1900fb.c
> diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c
> similarity index 100%
> rename from drivers/video/auo_k1901fb.c
> rename to drivers/video/fbdev/auo_k1901fb.c
> diff --git a/drivers/video/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
> similarity index 100%
> rename from drivers/video/auo_k190x.c
> rename to drivers/video/fbdev/auo_k190x.c
> diff --git a/drivers/video/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h
> similarity index 100%
> rename from drivers/video/auo_k190x.h
> rename to drivers/video/fbdev/auo_k190x.h
> diff --git a/drivers/video/bf537-lq035.c b/drivers/video/fbdev/bf537-lq035.c
> similarity index 100%
> rename from drivers/video/bf537-lq035.c
> rename to drivers/video/fbdev/bf537-lq035.c
> diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/fbdev/bf54x-lq043fb.c
> similarity index 100%
> rename from drivers/video/bf54x-lq043fb.c
> rename to drivers/video/fbdev/bf54x-lq043fb.c
> diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/fbdev/bfin-lq035q1-fb.c
> similarity index 100%
> rename from drivers/video/bfin-lq035q1-fb.c
> rename to drivers/video/fbdev/bfin-lq035q1-fb.c
> diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/fbdev/bfin-t350mcqb-fb.c
> similarity index 100%
> rename from drivers/video/bfin-t350mcqb-fb.c
> rename to drivers/video/fbdev/bfin-t350mcqb-fb.c
> diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
> similarity index 100%
> rename from drivers/video/bfin_adv7393fb.c
> rename to drivers/video/fbdev/bfin_adv7393fb.c
> diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/fbdev/bfin_adv7393fb.h
> similarity index 100%
> rename from drivers/video/bfin_adv7393fb.h
> rename to drivers/video/fbdev/bfin_adv7393fb.h
> diff --git a/drivers/video/broadsheetfb.c b/drivers/video/fbdev/broadsheetfb.c
> similarity index 100%
> rename from drivers/video/broadsheetfb.c
> rename to drivers/video/fbdev/broadsheetfb.c
> diff --git a/drivers/video/bt431.h b/drivers/video/fbdev/bt431.h
> similarity index 100%
> rename from drivers/video/bt431.h
> rename to drivers/video/fbdev/bt431.h
> diff --git a/drivers/video/bt455.h b/drivers/video/fbdev/bt455.h
> similarity index 100%
> rename from drivers/video/bt455.h
> rename to drivers/video/fbdev/bt455.h
> diff --git a/drivers/video/bw2.c b/drivers/video/fbdev/bw2.c
> similarity index 100%
> rename from drivers/video/bw2.c
> rename to drivers/video/fbdev/bw2.c
> diff --git a/drivers/video/c2p.h b/drivers/video/fbdev/c2p.h
> similarity index 100%
> rename from drivers/video/c2p.h
> rename to drivers/video/fbdev/c2p.h
> diff --git a/drivers/video/c2p_core.h b/drivers/video/fbdev/c2p_core.h
> similarity index 100%
> rename from drivers/video/c2p_core.h
> rename to drivers/video/fbdev/c2p_core.h
> diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/fbdev/c2p_iplan2.c
> similarity index 100%
> rename from drivers/video/c2p_iplan2.c
> rename to drivers/video/fbdev/c2p_iplan2.c
> diff --git a/drivers/video/c2p_planar.c b/drivers/video/fbdev/c2p_planar.c
> similarity index 100%
> rename from drivers/video/c2p_planar.c
> rename to drivers/video/fbdev/c2p_planar.c
> diff --git a/drivers/video/carminefb.c b/drivers/video/fbdev/carminefb.c
> similarity index 100%
> rename from drivers/video/carminefb.c
> rename to drivers/video/fbdev/carminefb.c
> diff --git a/drivers/video/carminefb.h b/drivers/video/fbdev/carminefb.h
> similarity index 100%
> rename from drivers/video/carminefb.h
> rename to drivers/video/fbdev/carminefb.h
> diff --git a/drivers/video/carminefb_regs.h b/drivers/video/fbdev/carminefb_regs.h
> similarity index 100%
> rename from drivers/video/carminefb_regs.h
> rename to drivers/video/fbdev/carminefb_regs.h
> diff --git a/drivers/video/cfbcopyarea.c b/drivers/video/fbdev/cfbcopyarea.c
> similarity index 100%
> rename from drivers/video/cfbcopyarea.c
> rename to drivers/video/fbdev/cfbcopyarea.c
> diff --git a/drivers/video/cfbfillrect.c b/drivers/video/fbdev/cfbfillrect.c
> similarity index 100%
> rename from drivers/video/cfbfillrect.c
> rename to drivers/video/fbdev/cfbfillrect.c
> diff --git a/drivers/video/cfbimgblt.c b/drivers/video/fbdev/cfbimgblt.c
> similarity index 100%
> rename from drivers/video/cfbimgblt.c
> rename to drivers/video/fbdev/cfbimgblt.c
> diff --git a/drivers/video/cg14.c b/drivers/video/fbdev/cg14.c
> similarity index 100%
> rename from drivers/video/cg14.c
> rename to drivers/video/fbdev/cg14.c
> diff --git a/drivers/video/cg3.c b/drivers/video/fbdev/cg3.c
> similarity index 100%
> rename from drivers/video/cg3.c
> rename to drivers/video/fbdev/cg3.c
> diff --git a/drivers/video/cg6.c b/drivers/video/fbdev/cg6.c
> similarity index 100%
> rename from drivers/video/cg6.c
> rename to drivers/video/fbdev/cg6.c
> diff --git a/drivers/video/chipsfb.c b/drivers/video/fbdev/chipsfb.c
> similarity index 100%
> rename from drivers/video/chipsfb.c
> rename to drivers/video/fbdev/chipsfb.c
> diff --git a/drivers/video/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> similarity index 100%
> rename from drivers/video/cirrusfb.c
> rename to drivers/video/fbdev/cirrusfb.c
> diff --git a/drivers/video/clps711xfb.c b/drivers/video/fbdev/clps711xfb.c
> similarity index 100%
> rename from drivers/video/clps711xfb.c
> rename to drivers/video/fbdev/clps711xfb.c
> diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
> similarity index 100%
> rename from drivers/video/cobalt_lcdfb.c
> rename to drivers/video/fbdev/cobalt_lcdfb.c
> diff --git a/drivers/video/controlfb.c b/drivers/video/fbdev/controlfb.c
> similarity index 100%
> rename from drivers/video/controlfb.c
> rename to drivers/video/fbdev/controlfb.c
> diff --git a/drivers/video/controlfb.h b/drivers/video/fbdev/controlfb.h
> similarity index 100%
> rename from drivers/video/controlfb.h
> rename to drivers/video/fbdev/controlfb.h
> diff --git a/drivers/video/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
> similarity index 100%
> rename from drivers/video/cyber2000fb.c
> rename to drivers/video/fbdev/cyber2000fb.c
> diff --git a/drivers/video/cyber2000fb.h b/drivers/video/fbdev/cyber2000fb.h
> similarity index 100%
> rename from drivers/video/cyber2000fb.h
> rename to drivers/video/fbdev/cyber2000fb.h
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
> similarity index 100%
> rename from drivers/video/da8xx-fb.c
> rename to drivers/video/fbdev/da8xx-fb.c
> diff --git a/drivers/video/dnfb.c b/drivers/video/fbdev/dnfb.c
> similarity index 100%
> rename from drivers/video/dnfb.c
> rename to drivers/video/fbdev/dnfb.c
> diff --git a/drivers/video/edid.h b/drivers/video/fbdev/edid.h
> similarity index 100%
> rename from drivers/video/edid.h
> rename to drivers/video/fbdev/edid.h
> diff --git a/drivers/video/efifb.c b/drivers/video/fbdev/efifb.c
> similarity index 100%
> rename from drivers/video/efifb.c
> rename to drivers/video/fbdev/efifb.c
> diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
> similarity index 100%
> rename from drivers/video/ep93xx-fb.c
> rename to drivers/video/fbdev/ep93xx-fb.c
> diff --git a/drivers/video/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
> similarity index 100%
> rename from drivers/video/exynos/Kconfig
> rename to drivers/video/fbdev/exynos/Kconfig
> diff --git a/drivers/video/exynos/Makefile b/drivers/video/fbdev/exynos/Makefile
> similarity index 100%
> rename from drivers/video/exynos/Makefile
> rename to drivers/video/fbdev/exynos/Makefile
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/fbdev/exynos/exynos_dp_core.c
> similarity index 100%
> rename from drivers/video/exynos/exynos_dp_core.c
> rename to drivers/video/fbdev/exynos/exynos_dp_core.c
> diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/fbdev/exynos/exynos_dp_core.h
> similarity index 100%
> rename from drivers/video/exynos/exynos_dp_core.h
> rename to drivers/video/fbdev/exynos/exynos_dp_core.h
> diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/fbdev/exynos/exynos_dp_reg.c
> similarity index 100%
> rename from drivers/video/exynos/exynos_dp_reg.c
> rename to drivers/video/fbdev/exynos/exynos_dp_reg.c
> diff --git a/drivers/video/exynos/exynos_dp_reg.h b/drivers/video/fbdev/exynos/exynos_dp_reg.h
> similarity index 100%
> rename from drivers/video/exynos/exynos_dp_reg.h
> rename to drivers/video/fbdev/exynos/exynos_dp_reg.h
> diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi.c
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi.c
> diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi_common.c
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
> diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi_common.h
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
> diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
> diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
> diff --git a/drivers/video/exynos/exynos_mipi_dsi_regs.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
> similarity index 100%
> rename from drivers/video/exynos/exynos_mipi_dsi_regs.h
> rename to drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
> diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/fbdev/exynos/s6e8ax0.c
> similarity index 100%
> rename from drivers/video/exynos/s6e8ax0.c
> rename to drivers/video/fbdev/exynos/s6e8ax0.c
> diff --git a/drivers/video/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
> similarity index 100%
> rename from drivers/video/fb-puv3.c
> rename to drivers/video/fbdev/fb-puv3.c
> diff --git a/drivers/video/fb_ddc.c b/drivers/video/fbdev/fb_ddc.c
> similarity index 100%
> rename from drivers/video/fb_ddc.c
> rename to drivers/video/fbdev/fb_ddc.c
> diff --git a/drivers/video/fb_defio.c b/drivers/video/fbdev/fb_defio.c
> similarity index 100%
> rename from drivers/video/fb_defio.c
> rename to drivers/video/fbdev/fb_defio.c
> diff --git a/drivers/video/fb_draw.h b/drivers/video/fbdev/fb_draw.h
> similarity index 100%
> rename from drivers/video/fb_draw.h
> rename to drivers/video/fbdev/fb_draw.h
> diff --git a/drivers/video/fb_notify.c b/drivers/video/fbdev/fb_notify.c
> similarity index 100%
> rename from drivers/video/fb_notify.c
> rename to drivers/video/fbdev/fb_notify.c
> diff --git a/drivers/video/fb_sys_fops.c b/drivers/video/fbdev/fb_sys_fops.c
> similarity index 100%
> rename from drivers/video/fb_sys_fops.c
> rename to drivers/video/fbdev/fb_sys_fops.c
> diff --git a/drivers/video/fbcmap.c b/drivers/video/fbdev/fbcmap.c
> similarity index 100%
> rename from drivers/video/fbcmap.c
> rename to drivers/video/fbdev/fbcmap.c
> diff --git a/drivers/video/fbcvt.c b/drivers/video/fbdev/fbcvt.c
> similarity index 100%
> rename from drivers/video/fbcvt.c
> rename to drivers/video/fbdev/fbcvt.c
> diff --git a/drivers/video/fbmem.c b/drivers/video/fbdev/fbmem.c
> similarity index 100%
> rename from drivers/video/fbmem.c
> rename to drivers/video/fbdev/fbmem.c
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbdev/fbmon.c
> similarity index 100%
> rename from drivers/video/fbmon.c
> rename to drivers/video/fbdev/fbmon.c
> diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbdev/fbsysfs.c
> similarity index 100%
> rename from drivers/video/fbsysfs.c
> rename to drivers/video/fbdev/fbsysfs.c
> diff --git a/drivers/video/ffb.c b/drivers/video/fbdev/ffb.c
> similarity index 100%
> rename from drivers/video/ffb.c
> rename to drivers/video/fbdev/ffb.c
> diff --git a/drivers/video/fm2fb.c b/drivers/video/fbdev/fm2fb.c
> similarity index 100%
> rename from drivers/video/fm2fb.c
> rename to drivers/video/fbdev/fm2fb.c
> diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
> similarity index 100%
> rename from drivers/video/fsl-diu-fb.c
> rename to drivers/video/fbdev/fsl-diu-fb.c
> diff --git a/drivers/video/g364fb.c b/drivers/video/fbdev/g364fb.c
> similarity index 100%
> rename from drivers/video/g364fb.c
> rename to drivers/video/fbdev/g364fb.c
> diff --git a/drivers/video/gbefb.c b/drivers/video/fbdev/gbefb.c
> similarity index 100%
> rename from drivers/video/gbefb.c
> rename to drivers/video/fbdev/gbefb.c
> diff --git a/drivers/video/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
> similarity index 100%
> rename from drivers/video/geode/Kconfig
> rename to drivers/video/fbdev/geode/Kconfig
> diff --git a/drivers/video/geode/Makefile b/drivers/video/fbdev/geode/Makefile
> similarity index 100%
> rename from drivers/video/geode/Makefile
> rename to drivers/video/fbdev/geode/Makefile
> diff --git a/drivers/video/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
> similarity index 100%
> rename from drivers/video/geode/display_gx.c
> rename to drivers/video/fbdev/geode/display_gx.c
> diff --git a/drivers/video/geode/display_gx1.c b/drivers/video/fbdev/geode/display_gx1.c
> similarity index 100%
> rename from drivers/video/geode/display_gx1.c
> rename to drivers/video/fbdev/geode/display_gx1.c
> diff --git a/drivers/video/geode/display_gx1.h b/drivers/video/fbdev/geode/display_gx1.h
> similarity index 100%
> rename from drivers/video/geode/display_gx1.h
> rename to drivers/video/fbdev/geode/display_gx1.h
> diff --git a/drivers/video/geode/geodefb.h b/drivers/video/fbdev/geode/geodefb.h
> similarity index 100%
> rename from drivers/video/geode/geodefb.h
> rename to drivers/video/fbdev/geode/geodefb.h
> diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c
> similarity index 100%
> rename from drivers/video/geode/gx1fb_core.c
> rename to drivers/video/fbdev/geode/gx1fb_core.c
> diff --git a/drivers/video/geode/gxfb.h b/drivers/video/fbdev/geode/gxfb.h
> similarity index 100%
> rename from drivers/video/geode/gxfb.h
> rename to drivers/video/fbdev/geode/gxfb.h
> diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c
> similarity index 100%
> rename from drivers/video/geode/gxfb_core.c
> rename to drivers/video/fbdev/geode/gxfb_core.c
> diff --git a/drivers/video/geode/lxfb.h b/drivers/video/fbdev/geode/lxfb.h
> similarity index 100%
> rename from drivers/video/geode/lxfb.h
> rename to drivers/video/fbdev/geode/lxfb.h
> diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c
> similarity index 100%
> rename from drivers/video/geode/lxfb_core.c
> rename to drivers/video/fbdev/geode/lxfb_core.c
> diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c
> similarity index 100%
> rename from drivers/video/geode/lxfb_ops.c
> rename to drivers/video/fbdev/geode/lxfb_ops.c
> diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/fbdev/geode/suspend_gx.c
> similarity index 100%
> rename from drivers/video/geode/suspend_gx.c
> rename to drivers/video/fbdev/geode/suspend_gx.c
> diff --git a/drivers/video/geode/video_cs5530.c b/drivers/video/fbdev/geode/video_cs5530.c
> similarity index 100%
> rename from drivers/video/geode/video_cs5530.c
> rename to drivers/video/fbdev/geode/video_cs5530.c
> diff --git a/drivers/video/geode/video_cs5530.h b/drivers/video/fbdev/geode/video_cs5530.h
> similarity index 100%
> rename from drivers/video/geode/video_cs5530.h
> rename to drivers/video/fbdev/geode/video_cs5530.h
> diff --git a/drivers/video/geode/video_gx.c b/drivers/video/fbdev/geode/video_gx.c
> similarity index 100%
> rename from drivers/video/geode/video_gx.c
> rename to drivers/video/fbdev/geode/video_gx.c
> diff --git a/drivers/video/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c
> similarity index 100%
> rename from drivers/video/goldfishfb.c
> rename to drivers/video/fbdev/goldfishfb.c
> diff --git a/drivers/video/grvga.c b/drivers/video/fbdev/grvga.c
> similarity index 100%
> rename from drivers/video/grvga.c
> rename to drivers/video/fbdev/grvga.c
> diff --git a/drivers/video/gxt4500.c b/drivers/video/fbdev/gxt4500.c
> similarity index 100%
> rename from drivers/video/gxt4500.c
> rename to drivers/video/fbdev/gxt4500.c
> diff --git a/drivers/video/hecubafb.c b/drivers/video/fbdev/hecubafb.c
> similarity index 100%
> rename from drivers/video/hecubafb.c
> rename to drivers/video/fbdev/hecubafb.c
> diff --git a/drivers/video/hgafb.c b/drivers/video/fbdev/hgafb.c
> similarity index 100%
> rename from drivers/video/hgafb.c
> rename to drivers/video/fbdev/hgafb.c
> diff --git a/drivers/video/hitfb.c b/drivers/video/fbdev/hitfb.c
> similarity index 100%
> rename from drivers/video/hitfb.c
> rename to drivers/video/fbdev/hitfb.c
> diff --git a/drivers/video/hpfb.c b/drivers/video/fbdev/hpfb.c
> similarity index 100%
> rename from drivers/video/hpfb.c
> rename to drivers/video/fbdev/hpfb.c
> diff --git a/drivers/video/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
> similarity index 100%
> rename from drivers/video/hyperv_fb.c
> rename to drivers/video/fbdev/hyperv_fb.c
> diff --git a/drivers/video/i740_reg.h b/drivers/video/fbdev/i740_reg.h
> similarity index 100%
> rename from drivers/video/i740_reg.h
> rename to drivers/video/fbdev/i740_reg.h
> diff --git a/drivers/video/i740fb.c b/drivers/video/fbdev/i740fb.c
> similarity index 100%
> rename from drivers/video/i740fb.c
> rename to drivers/video/fbdev/i740fb.c
> diff --git a/drivers/video/i810/Makefile b/drivers/video/fbdev/i810/Makefile
> similarity index 100%
> rename from drivers/video/i810/Makefile
> rename to drivers/video/fbdev/i810/Makefile
> diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/fbdev/i810/i810-i2c.c
> similarity index 100%
> rename from drivers/video/i810/i810-i2c.c
> rename to drivers/video/fbdev/i810/i810-i2c.c
> diff --git a/drivers/video/i810/i810.h b/drivers/video/fbdev/i810/i810.h
> similarity index 100%
> rename from drivers/video/i810/i810.h
> rename to drivers/video/fbdev/i810/i810.h
> diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/fbdev/i810/i810_accel.c
> similarity index 100%
> rename from drivers/video/i810/i810_accel.c
> rename to drivers/video/fbdev/i810/i810_accel.c
> diff --git a/drivers/video/i810/i810_dvt.c b/drivers/video/fbdev/i810/i810_dvt.c
> similarity index 100%
> rename from drivers/video/i810/i810_dvt.c
> rename to drivers/video/fbdev/i810/i810_dvt.c
> diff --git a/drivers/video/i810/i810_gtf.c b/drivers/video/fbdev/i810/i810_gtf.c
> similarity index 100%
> rename from drivers/video/i810/i810_gtf.c
> rename to drivers/video/fbdev/i810/i810_gtf.c
> diff --git a/drivers/video/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c
> similarity index 100%
> rename from drivers/video/i810/i810_main.c
> rename to drivers/video/fbdev/i810/i810_main.c
> diff --git a/drivers/video/i810/i810_main.h b/drivers/video/fbdev/i810/i810_main.h
> similarity index 100%
> rename from drivers/video/i810/i810_main.h
> rename to drivers/video/fbdev/i810/i810_main.h
> diff --git a/drivers/video/i810/i810_regs.h b/drivers/video/fbdev/i810/i810_regs.h
> similarity index 100%
> rename from drivers/video/i810/i810_regs.h
> rename to drivers/video/fbdev/i810/i810_regs.h
> diff --git a/drivers/video/igafb.c b/drivers/video/fbdev/igafb.c
> similarity index 100%
> rename from drivers/video/igafb.c
> rename to drivers/video/fbdev/igafb.c
> diff --git a/drivers/video/imsttfb.c b/drivers/video/fbdev/imsttfb.c
> similarity index 100%
> rename from drivers/video/imsttfb.c
> rename to drivers/video/fbdev/imsttfb.c
> diff --git a/drivers/video/imxfb.c b/drivers/video/fbdev/imxfb.c
> similarity index 100%
> rename from drivers/video/imxfb.c
> rename to drivers/video/fbdev/imxfb.c
> diff --git a/drivers/video/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
> similarity index 100%
> rename from drivers/video/intelfb/Makefile
> rename to drivers/video/fbdev/intelfb/Makefile
> diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
> similarity index 100%
> rename from drivers/video/intelfb/intelfb.h
> rename to drivers/video/fbdev/intelfb/intelfb.h
> diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
> similarity index 100%
> rename from drivers/video/intelfb/intelfb_i2c.c
> rename to drivers/video/fbdev/intelfb/intelfb_i2c.c
> diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
> similarity index 100%
> rename from drivers/video/intelfb/intelfbdrv.c
> rename to drivers/video/fbdev/intelfb/intelfbdrv.c
> diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
> similarity index 100%
> rename from drivers/video/intelfb/intelfbhw.c
> rename to drivers/video/fbdev/intelfb/intelfbhw.c
> diff --git a/drivers/video/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
> similarity index 100%
> rename from drivers/video/intelfb/intelfbhw.h
> rename to drivers/video/fbdev/intelfb/intelfbhw.h
> diff --git a/drivers/video/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
> similarity index 100%
> rename from drivers/video/jz4740_fb.c
> rename to drivers/video/fbdev/jz4740_fb.c
> diff --git a/drivers/video/kyro/Makefile b/drivers/video/fbdev/kyro/Makefile
> similarity index 100%
> rename from drivers/video/kyro/Makefile
> rename to drivers/video/fbdev/kyro/Makefile
> diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/fbdev/kyro/STG4000InitDevice.c
> similarity index 100%
> rename from drivers/video/kyro/STG4000InitDevice.c
> rename to drivers/video/fbdev/kyro/STG4000InitDevice.c
> diff --git a/drivers/video/kyro/STG4000Interface.h b/drivers/video/fbdev/kyro/STG4000Interface.h
> similarity index 100%
> rename from drivers/video/kyro/STG4000Interface.h
> rename to drivers/video/fbdev/kyro/STG4000Interface.h
> diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
> similarity index 100%
> rename from drivers/video/kyro/STG4000OverlayDevice.c
> rename to drivers/video/fbdev/kyro/STG4000OverlayDevice.c
> diff --git a/drivers/video/kyro/STG4000Ramdac.c b/drivers/video/fbdev/kyro/STG4000Ramdac.c
> similarity index 100%
> rename from drivers/video/kyro/STG4000Ramdac.c
> rename to drivers/video/fbdev/kyro/STG4000Ramdac.c
> diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/fbdev/kyro/STG4000Reg.h
> similarity index 100%
> rename from drivers/video/kyro/STG4000Reg.h
> rename to drivers/video/fbdev/kyro/STG4000Reg.h
> diff --git a/drivers/video/kyro/STG4000VTG.c b/drivers/video/fbdev/kyro/STG4000VTG.c
> similarity index 100%
> rename from drivers/video/kyro/STG4000VTG.c
> rename to drivers/video/fbdev/kyro/STG4000VTG.c
> diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
> similarity index 100%
> rename from drivers/video/kyro/fbdev.c
> rename to drivers/video/fbdev/kyro/fbdev.c
> diff --git a/drivers/video/leo.c b/drivers/video/fbdev/leo.c
> similarity index 100%
> rename from drivers/video/leo.c
> rename to drivers/video/fbdev/leo.c
> diff --git a/drivers/video/macfb.c b/drivers/video/fbdev/macfb.c
> similarity index 100%
> rename from drivers/video/macfb.c
> rename to drivers/video/fbdev/macfb.c
> diff --git a/drivers/video/macmodes.c b/drivers/video/fbdev/macmodes.c
> similarity index 100%
> rename from drivers/video/macmodes.c
> rename to drivers/video/fbdev/macmodes.c
> diff --git a/drivers/video/macmodes.h b/drivers/video/fbdev/macmodes.h
> similarity index 100%
> rename from drivers/video/macmodes.h
> rename to drivers/video/fbdev/macmodes.h
> diff --git a/drivers/video/matrox/Makefile b/drivers/video/fbdev/matrox/Makefile
> similarity index 100%
> rename from drivers/video/matrox/Makefile
> rename to drivers/video/fbdev/matrox/Makefile
> diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/fbdev/matrox/g450_pll.c
> similarity index 100%
> rename from drivers/video/matrox/g450_pll.c
> rename to drivers/video/fbdev/matrox/g450_pll.c
> diff --git a/drivers/video/matrox/g450_pll.h b/drivers/video/fbdev/matrox/g450_pll.h
> similarity index 100%
> rename from drivers/video/matrox/g450_pll.h
> rename to drivers/video/fbdev/matrox/g450_pll.h
> diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/fbdev/matrox/i2c-matroxfb.c
> similarity index 100%
> rename from drivers/video/matrox/i2c-matroxfb.c
> rename to drivers/video/fbdev/matrox/i2c-matroxfb.c
> diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_DAC1064.c
> rename to drivers/video/fbdev/matrox/matroxfb_DAC1064.c
> diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_DAC1064.h
> rename to drivers/video/fbdev/matrox/matroxfb_DAC1064.h
> diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_Ti3026.c
> rename to drivers/video/fbdev/matrox/matroxfb_Ti3026.c
> diff --git a/drivers/video/matrox/matroxfb_Ti3026.h b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_Ti3026.h
> rename to drivers/video/fbdev/matrox/matroxfb_Ti3026.h
> diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/fbdev/matrox/matroxfb_accel.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_accel.c
> rename to drivers/video/fbdev/matrox/matroxfb_accel.c
> diff --git a/drivers/video/matrox/matroxfb_accel.h b/drivers/video/fbdev/matrox/matroxfb_accel.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_accel.h
> rename to drivers/video/fbdev/matrox/matroxfb_accel.h
> diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_base.c
> rename to drivers/video/fbdev/matrox/matroxfb_base.c
> diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/fbdev/matrox/matroxfb_base.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_base.h
> rename to drivers/video/fbdev/matrox/matroxfb_base.h
> diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_crtc2.c
> rename to drivers/video/fbdev/matrox/matroxfb_crtc2.c
> diff --git a/drivers/video/matrox/matroxfb_crtc2.h b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_crtc2.h
> rename to drivers/video/fbdev/matrox/matroxfb_crtc2.h
> diff --git a/drivers/video/matrox/matroxfb_g450.c b/drivers/video/fbdev/matrox/matroxfb_g450.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_g450.c
> rename to drivers/video/fbdev/matrox/matroxfb_g450.c
> diff --git a/drivers/video/matrox/matroxfb_g450.h b/drivers/video/fbdev/matrox/matroxfb_g450.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_g450.h
> rename to drivers/video/fbdev/matrox/matroxfb_g450.h
> diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_maven.c
> rename to drivers/video/fbdev/matrox/matroxfb_maven.c
> diff --git a/drivers/video/matrox/matroxfb_maven.h b/drivers/video/fbdev/matrox/matroxfb_maven.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_maven.h
> rename to drivers/video/fbdev/matrox/matroxfb_maven.h
> diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/fbdev/matrox/matroxfb_misc.c
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_misc.c
> rename to drivers/video/fbdev/matrox/matroxfb_misc.c
> diff --git a/drivers/video/matrox/matroxfb_misc.h b/drivers/video/fbdev/matrox/matroxfb_misc.h
> similarity index 100%
> rename from drivers/video/matrox/matroxfb_misc.h
> rename to drivers/video/fbdev/matrox/matroxfb_misc.h
> diff --git a/drivers/video/maxinefb.c b/drivers/video/fbdev/maxinefb.c
> similarity index 100%
> rename from drivers/video/maxinefb.c
> rename to drivers/video/fbdev/maxinefb.c
> diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/fbdev/mb862xx/Makefile
> similarity index 100%
> rename from drivers/video/mb862xx/Makefile
> rename to drivers/video/fbdev/mb862xx/Makefile
> diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xx-i2c.c
> rename to drivers/video/fbdev/mb862xx/mb862xx-i2c.c
> diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xx_reg.h
> rename to drivers/video/fbdev/mb862xx/mb862xx_reg.h
> diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/fbdev/mb862xx/mb862xxfb.h
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xxfb.h
> rename to drivers/video/fbdev/mb862xx/mb862xxfb.h
> diff --git a/drivers/video/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xxfb_accel.c
> rename to drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
> diff --git a/drivers/video/mb862xx/mb862xxfb_accel.h b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xxfb_accel.h
> rename to drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
> diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
> similarity index 100%
> rename from drivers/video/mb862xx/mb862xxfbdrv.c
> rename to drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
> diff --git a/drivers/video/mbx/Makefile b/drivers/video/fbdev/mbx/Makefile
> similarity index 100%
> rename from drivers/video/mbx/Makefile
> rename to drivers/video/fbdev/mbx/Makefile
> diff --git a/drivers/video/mbx/mbxdebugfs.c b/drivers/video/fbdev/mbx/mbxdebugfs.c
> similarity index 100%
> rename from drivers/video/mbx/mbxdebugfs.c
> rename to drivers/video/fbdev/mbx/mbxdebugfs.c
> diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/fbdev/mbx/mbxfb.c
> similarity index 100%
> rename from drivers/video/mbx/mbxfb.c
> rename to drivers/video/fbdev/mbx/mbxfb.c
> diff --git a/drivers/video/mbx/reg_bits.h b/drivers/video/fbdev/mbx/reg_bits.h
> similarity index 100%
> rename from drivers/video/mbx/reg_bits.h
> rename to drivers/video/fbdev/mbx/reg_bits.h
> diff --git a/drivers/video/mbx/regs.h b/drivers/video/fbdev/mbx/regs.h
> similarity index 100%
> rename from drivers/video/mbx/regs.h
> rename to drivers/video/fbdev/mbx/regs.h
> diff --git a/drivers/video/metronomefb.c b/drivers/video/fbdev/metronomefb.c
> similarity index 100%
> rename from drivers/video/metronomefb.c
> rename to drivers/video/fbdev/metronomefb.c
> diff --git a/drivers/video/mmp/Kconfig b/drivers/video/fbdev/mmp/Kconfig
> similarity index 61%
> rename from drivers/video/mmp/Kconfig
> rename to drivers/video/fbdev/mmp/Kconfig
> index e9ea39e13722..d4a4ffc24749 100644
> --- a/drivers/video/mmp/Kconfig
> +++ b/drivers/video/fbdev/mmp/Kconfig
> @@ -5,7 +5,7 @@ menuconfig MMP_DISP
> Marvell Display Subsystem support.
>
> if MMP_DISP
> -source "drivers/video/mmp/hw/Kconfig"
> -source "drivers/video/mmp/panel/Kconfig"
> -source "drivers/video/mmp/fb/Kconfig"
> +source "drivers/video/fbdev/mmp/hw/Kconfig"
> +source "drivers/video/fbdev/mmp/panel/Kconfig"
> +source "drivers/video/fbdev/mmp/fb/Kconfig"
> endif
> diff --git a/drivers/video/mmp/Makefile b/drivers/video/fbdev/mmp/Makefile
> similarity index 100%
> rename from drivers/video/mmp/Makefile
> rename to drivers/video/fbdev/mmp/Makefile
> diff --git a/drivers/video/mmp/core.c b/drivers/video/fbdev/mmp/core.c
> similarity index 100%
> rename from drivers/video/mmp/core.c
> rename to drivers/video/fbdev/mmp/core.c
> diff --git a/drivers/video/mmp/fb/Kconfig b/drivers/video/fbdev/mmp/fb/Kconfig
> similarity index 100%
> rename from drivers/video/mmp/fb/Kconfig
> rename to drivers/video/fbdev/mmp/fb/Kconfig
> diff --git a/drivers/video/mmp/fb/Makefile b/drivers/video/fbdev/mmp/fb/Makefile
> similarity index 100%
> rename from drivers/video/mmp/fb/Makefile
> rename to drivers/video/fbdev/mmp/fb/Makefile
> diff --git a/drivers/video/mmp/fb/mmpfb.c b/drivers/video/fbdev/mmp/fb/mmpfb.c
> similarity index 100%
> rename from drivers/video/mmp/fb/mmpfb.c
> rename to drivers/video/fbdev/mmp/fb/mmpfb.c
> diff --git a/drivers/video/mmp/fb/mmpfb.h b/drivers/video/fbdev/mmp/fb/mmpfb.h
> similarity index 100%
> rename from drivers/video/mmp/fb/mmpfb.h
> rename to drivers/video/fbdev/mmp/fb/mmpfb.h
> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/fbdev/mmp/hw/Kconfig
> similarity index 100%
> rename from drivers/video/mmp/hw/Kconfig
> rename to drivers/video/fbdev/mmp/hw/Kconfig
> diff --git a/drivers/video/mmp/hw/Makefile b/drivers/video/fbdev/mmp/hw/Makefile
> similarity index 100%
> rename from drivers/video/mmp/hw/Makefile
> rename to drivers/video/fbdev/mmp/hw/Makefile
> diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
> similarity index 100%
> rename from drivers/video/mmp/hw/mmp_ctrl.c
> rename to drivers/video/fbdev/mmp/hw/mmp_ctrl.c
> diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
> similarity index 100%
> rename from drivers/video/mmp/hw/mmp_ctrl.h
> rename to drivers/video/fbdev/mmp/hw/mmp_ctrl.h
> diff --git a/drivers/video/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
> similarity index 100%
> rename from drivers/video/mmp/hw/mmp_spi.c
> rename to drivers/video/fbdev/mmp/hw/mmp_spi.c
> diff --git a/drivers/video/mmp/panel/Kconfig b/drivers/video/fbdev/mmp/panel/Kconfig
> similarity index 100%
> rename from drivers/video/mmp/panel/Kconfig
> rename to drivers/video/fbdev/mmp/panel/Kconfig
> diff --git a/drivers/video/mmp/panel/Makefile b/drivers/video/fbdev/mmp/panel/Makefile
> similarity index 100%
> rename from drivers/video/mmp/panel/Makefile
> rename to drivers/video/fbdev/mmp/panel/Makefile
> diff --git a/drivers/video/mmp/panel/tpo_tj032md01bw.c b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
> similarity index 100%
> rename from drivers/video/mmp/panel/tpo_tj032md01bw.c
> rename to drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
> diff --git a/drivers/video/modedb.c b/drivers/video/fbdev/modedb.c
> similarity index 100%
> rename from drivers/video/modedb.c
> rename to drivers/video/fbdev/modedb.c
> diff --git a/drivers/video/msm/Makefile b/drivers/video/fbdev/msm/Makefile
> similarity index 100%
> rename from drivers/video/msm/Makefile
> rename to drivers/video/fbdev/msm/Makefile
> diff --git a/drivers/video/msm/mddi.c b/drivers/video/fbdev/msm/mddi.c
> similarity index 100%
> rename from drivers/video/msm/mddi.c
> rename to drivers/video/fbdev/msm/mddi.c
> diff --git a/drivers/video/msm/mddi_client_dummy.c b/drivers/video/fbdev/msm/mddi_client_dummy.c
> similarity index 100%
> rename from drivers/video/msm/mddi_client_dummy.c
> rename to drivers/video/fbdev/msm/mddi_client_dummy.c
> diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/fbdev/msm/mddi_client_nt35399.c
> similarity index 100%
> rename from drivers/video/msm/mddi_client_nt35399.c
> rename to drivers/video/fbdev/msm/mddi_client_nt35399.c
> diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/fbdev/msm/mddi_client_toshiba.c
> similarity index 100%
> rename from drivers/video/msm/mddi_client_toshiba.c
> rename to drivers/video/fbdev/msm/mddi_client_toshiba.c
> diff --git a/drivers/video/msm/mddi_hw.h b/drivers/video/fbdev/msm/mddi_hw.h
> similarity index 100%
> rename from drivers/video/msm/mddi_hw.h
> rename to drivers/video/fbdev/msm/mddi_hw.h
> diff --git a/drivers/video/msm/mdp.c b/drivers/video/fbdev/msm/mdp.c
> similarity index 100%
> rename from drivers/video/msm/mdp.c
> rename to drivers/video/fbdev/msm/mdp.c
> diff --git a/drivers/video/msm/mdp_csc_table.h b/drivers/video/fbdev/msm/mdp_csc_table.h
> similarity index 100%
> rename from drivers/video/msm/mdp_csc_table.h
> rename to drivers/video/fbdev/msm/mdp_csc_table.h
> diff --git a/drivers/video/msm/mdp_hw.h b/drivers/video/fbdev/msm/mdp_hw.h
> similarity index 100%
> rename from drivers/video/msm/mdp_hw.h
> rename to drivers/video/fbdev/msm/mdp_hw.h
> diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/fbdev/msm/mdp_ppp.c
> similarity index 100%
> rename from drivers/video/msm/mdp_ppp.c
> rename to drivers/video/fbdev/msm/mdp_ppp.c
> diff --git a/drivers/video/msm/mdp_scale_tables.c b/drivers/video/fbdev/msm/mdp_scale_tables.c
> similarity index 100%
> rename from drivers/video/msm/mdp_scale_tables.c
> rename to drivers/video/fbdev/msm/mdp_scale_tables.c
> diff --git a/drivers/video/msm/mdp_scale_tables.h b/drivers/video/fbdev/msm/mdp_scale_tables.h
> similarity index 100%
> rename from drivers/video/msm/mdp_scale_tables.h
> rename to drivers/video/fbdev/msm/mdp_scale_tables.h
> diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/fbdev/msm/msm_fb.c
> similarity index 100%
> rename from drivers/video/msm/msm_fb.c
> rename to drivers/video/fbdev/msm/msm_fb.c
> diff --git a/drivers/video/mx3fb.c b/drivers/video/fbdev/mx3fb.c
> similarity index 100%
> rename from drivers/video/mx3fb.c
> rename to drivers/video/fbdev/mx3fb.c
> diff --git a/drivers/video/mxsfb.c b/drivers/video/fbdev/mxsfb.c
> similarity index 100%
> rename from drivers/video/mxsfb.c
> rename to drivers/video/fbdev/mxsfb.c
> diff --git a/drivers/video/n411.c b/drivers/video/fbdev/n411.c
> similarity index 100%
> rename from drivers/video/n411.c
> rename to drivers/video/fbdev/n411.c
> diff --git a/drivers/video/neofb.c b/drivers/video/fbdev/neofb.c
> similarity index 100%
> rename from drivers/video/neofb.c
> rename to drivers/video/fbdev/neofb.c
> diff --git a/drivers/video/nuc900fb.c b/drivers/video/fbdev/nuc900fb.c
> similarity index 100%
> rename from drivers/video/nuc900fb.c
> rename to drivers/video/fbdev/nuc900fb.c
> diff --git a/drivers/video/nuc900fb.h b/drivers/video/fbdev/nuc900fb.h
> similarity index 100%
> rename from drivers/video/nuc900fb.h
> rename to drivers/video/fbdev/nuc900fb.h
> diff --git a/drivers/video/nvidia/Makefile b/drivers/video/fbdev/nvidia/Makefile
> similarity index 100%
> rename from drivers/video/nvidia/Makefile
> rename to drivers/video/fbdev/nvidia/Makefile
> diff --git a/drivers/video/nvidia/nv_accel.c b/drivers/video/fbdev/nvidia/nv_accel.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_accel.c
> rename to drivers/video/fbdev/nvidia/nv_accel.c
> diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/fbdev/nvidia/nv_backlight.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_backlight.c
> rename to drivers/video/fbdev/nvidia/nv_backlight.c
> diff --git a/drivers/video/nvidia/nv_dma.h b/drivers/video/fbdev/nvidia/nv_dma.h
> similarity index 100%
> rename from drivers/video/nvidia/nv_dma.h
> rename to drivers/video/fbdev/nvidia/nv_dma.h
> diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_hw.c
> rename to drivers/video/fbdev/nvidia/nv_hw.c
> diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_i2c.c
> rename to drivers/video/fbdev/nvidia/nv_i2c.c
> diff --git a/drivers/video/nvidia/nv_local.h b/drivers/video/fbdev/nvidia/nv_local.h
> similarity index 100%
> rename from drivers/video/nvidia/nv_local.h
> rename to drivers/video/fbdev/nvidia/nv_local.h
> diff --git a/drivers/video/nvidia/nv_of.c b/drivers/video/fbdev/nvidia/nv_of.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_of.c
> rename to drivers/video/fbdev/nvidia/nv_of.c
> diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/fbdev/nvidia/nv_proto.h
> similarity index 100%
> rename from drivers/video/nvidia/nv_proto.h
> rename to drivers/video/fbdev/nvidia/nv_proto.h
> diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c
> similarity index 100%
> rename from drivers/video/nvidia/nv_setup.c
> rename to drivers/video/fbdev/nvidia/nv_setup.c
> diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/fbdev/nvidia/nv_type.h
> similarity index 100%
> rename from drivers/video/nvidia/nv_type.h
> rename to drivers/video/fbdev/nvidia/nv_type.h
> diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c
> similarity index 100%
> rename from drivers/video/nvidia/nvidia.c
> rename to drivers/video/fbdev/nvidia/nvidia.c
> diff --git a/drivers/video/ocfb.c b/drivers/video/fbdev/ocfb.c
> similarity index 100%
> rename from drivers/video/ocfb.c
> rename to drivers/video/fbdev/ocfb.c
> diff --git a/drivers/video/offb.c b/drivers/video/fbdev/offb.c
> similarity index 100%
> rename from drivers/video/offb.c
> rename to drivers/video/fbdev/offb.c
> diff --git a/drivers/video/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
> similarity index 100%
> rename from drivers/video/omap/Kconfig
> rename to drivers/video/fbdev/omap/Kconfig
> diff --git a/drivers/video/omap/Makefile b/drivers/video/fbdev/omap/Makefile
> similarity index 100%
> rename from drivers/video/omap/Makefile
> rename to drivers/video/fbdev/omap/Makefile
> diff --git a/drivers/video/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
> similarity index 100%
> rename from drivers/video/omap/hwa742.c
> rename to drivers/video/fbdev/omap/hwa742.c
> diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
> similarity index 100%
> rename from drivers/video/omap/lcd_ams_delta.c
> rename to drivers/video/fbdev/omap/lcd_ams_delta.c
> diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c
> similarity index 100%
> rename from drivers/video/omap/lcd_h3.c
> rename to drivers/video/fbdev/omap/lcd_h3.c
> diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c
> similarity index 100%
> rename from drivers/video/omap/lcd_htcherald.c
> rename to drivers/video/fbdev/omap/lcd_htcherald.c
> diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
> similarity index 100%
> rename from drivers/video/omap/lcd_inn1510.c
> rename to drivers/video/fbdev/omap/lcd_inn1510.c
> diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c
> similarity index 100%
> rename from drivers/video/omap/lcd_inn1610.c
> rename to drivers/video/fbdev/omap/lcd_inn1610.c
> diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
> similarity index 100%
> rename from drivers/video/omap/lcd_mipid.c
> rename to drivers/video/fbdev/omap/lcd_mipid.c
> diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
> similarity index 100%
> rename from drivers/video/omap/lcd_osk.c
> rename to drivers/video/fbdev/omap/lcd_osk.c
> diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c
> similarity index 100%
> rename from drivers/video/omap/lcd_palmte.c
> rename to drivers/video/fbdev/omap/lcd_palmte.c
> diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c
> similarity index 100%
> rename from drivers/video/omap/lcd_palmtt.c
> rename to drivers/video/fbdev/omap/lcd_palmtt.c
> diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c
> similarity index 100%
> rename from drivers/video/omap/lcd_palmz71.c
> rename to drivers/video/fbdev/omap/lcd_palmz71.c
> diff --git a/drivers/video/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> similarity index 100%
> rename from drivers/video/omap/lcdc.c
> rename to drivers/video/fbdev/omap/lcdc.c
> diff --git a/drivers/video/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
> similarity index 100%
> rename from drivers/video/omap/lcdc.h
> rename to drivers/video/fbdev/omap/lcdc.h
> diff --git a/drivers/video/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
> similarity index 100%
> rename from drivers/video/omap/omapfb.h
> rename to drivers/video/fbdev/omap/omapfb.h
> diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
> similarity index 100%
> rename from drivers/video/omap/omapfb_main.c
> rename to drivers/video/fbdev/omap/omapfb_main.c
> diff --git a/drivers/video/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> similarity index 100%
> rename from drivers/video/omap/sossi.c
> rename to drivers/video/fbdev/omap/sossi.c
> diff --git a/drivers/video/fbdev/omap2/Kconfig b/drivers/video/fbdev/omap2/Kconfig
> new file mode 100644
> index 000000000000..c22955d2de9a
> --- /dev/null
> +++ b/drivers/video/fbdev/omap2/Kconfig
> @@ -0,0 +1,10 @@
> +config OMAP2_VRFB
> + bool
> +
> +if ARCH_OMAP2PLUS
> +
> +source "drivers/video/fbdev/omap2/dss/Kconfig"
> +source "drivers/video/fbdev/omap2/omapfb/Kconfig"
> +source "drivers/video/fbdev/omap2/displays-new/Kconfig"
> +
> +endif
> diff --git a/drivers/video/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
> similarity index 100%
> rename from drivers/video/omap2/Makefile
> rename to drivers/video/fbdev/omap2/Makefile
> diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
> similarity index 100%
> rename from drivers/video/omap2/displays-new/Kconfig
> rename to drivers/video/fbdev/omap2/displays-new/Kconfig
> diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
> similarity index 100%
> rename from drivers/video/omap2/displays-new/Makefile
> rename to drivers/video/fbdev/omap2/displays-new/Makefile
> diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/connector-analog-tv.c
> rename to drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
> diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/connector-dvi.c
> rename to drivers/video/fbdev/omap2/displays-new/connector-dvi.c
> diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/connector-hdmi.c
> rename to drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
> diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/encoder-tfp410.c
> rename to drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
> diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/encoder-tpd12s015.c
> rename to drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
> diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-dpi.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-dpi.c
> diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-dsi-cm.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
> diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> diff --git a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
> diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
> diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-sony-acx565akm.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
> diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
> diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
> similarity index 100%
> rename from drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
> rename to drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
> diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
> similarity index 100%
> rename from drivers/video/omap2/dss/Kconfig
> rename to drivers/video/fbdev/omap2/dss/Kconfig
> diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
> similarity index 100%
> rename from drivers/video/omap2/dss/Makefile
> rename to drivers/video/fbdev/omap2/dss/Makefile
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/fbdev/omap2/dss/apply.c
> similarity index 100%
> rename from drivers/video/omap2/dss/apply.c
> rename to drivers/video/fbdev/omap2/dss/apply.c
> diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
> similarity index 100%
> rename from drivers/video/omap2/dss/core.c
> rename to drivers/video/fbdev/omap2/dss/core.c
> diff --git a/drivers/video/omap2/dss/dispc-compat.c b/drivers/video/fbdev/omap2/dss/dispc-compat.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dispc-compat.c
> rename to drivers/video/fbdev/omap2/dss/dispc-compat.c
> diff --git a/drivers/video/omap2/dss/dispc-compat.h b/drivers/video/fbdev/omap2/dss/dispc-compat.h
> similarity index 100%
> rename from drivers/video/omap2/dss/dispc-compat.h
> rename to drivers/video/fbdev/omap2/dss/dispc-compat.h
> diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dispc.c
> rename to drivers/video/fbdev/omap2/dss/dispc.c
> diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/fbdev/omap2/dss/dispc.h
> similarity index 100%
> rename from drivers/video/omap2/dss/dispc.h
> rename to drivers/video/fbdev/omap2/dss/dispc.h
> diff --git a/drivers/video/omap2/dss/dispc_coefs.c b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dispc_coefs.c
> rename to drivers/video/fbdev/omap2/dss/dispc_coefs.c
> diff --git a/drivers/video/omap2/dss/display-sysfs.c b/drivers/video/fbdev/omap2/dss/display-sysfs.c
> similarity index 100%
> rename from drivers/video/omap2/dss/display-sysfs.c
> rename to drivers/video/fbdev/omap2/dss/display-sysfs.c
> diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/fbdev/omap2/dss/display.c
> similarity index 100%
> rename from drivers/video/omap2/dss/display.c
> rename to drivers/video/fbdev/omap2/dss/display.c
> diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dpi.c
> rename to drivers/video/fbdev/omap2/dss/dpi.c
> diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dsi.c
> rename to drivers/video/fbdev/omap2/dss/dsi.c
> diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dss.c
> rename to drivers/video/fbdev/omap2/dss/dss.c
> diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
> similarity index 100%
> rename from drivers/video/omap2/dss/dss.h
> rename to drivers/video/fbdev/omap2/dss/dss.h
> diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
> similarity index 100%
> rename from drivers/video/omap2/dss/dss_features.c
> rename to drivers/video/fbdev/omap2/dss/dss_features.c
> diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/fbdev/omap2/dss/dss_features.h
> similarity index 100%
> rename from drivers/video/omap2/dss/dss_features.h
> rename to drivers/video/fbdev/omap2/dss/dss_features.h
> diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi.h
> rename to drivers/video/fbdev/omap2/dss/hdmi.h
> diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi4.c
> rename to drivers/video/fbdev/omap2/dss/hdmi4.c
> diff --git a/drivers/video/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi4_core.c
> rename to drivers/video/fbdev/omap2/dss/hdmi4_core.c
> diff --git a/drivers/video/omap2/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi4_core.h
> rename to drivers/video/fbdev/omap2/dss/hdmi4_core.h
> diff --git a/drivers/video/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi_common.c
> rename to drivers/video/fbdev/omap2/dss/hdmi_common.c
> diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi_phy.c
> rename to drivers/video/fbdev/omap2/dss/hdmi_phy.c
> diff --git a/drivers/video/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi_pll.c
> rename to drivers/video/fbdev/omap2/dss/hdmi_pll.c
> diff --git a/drivers/video/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
> similarity index 100%
> rename from drivers/video/omap2/dss/hdmi_wp.c
> rename to drivers/video/fbdev/omap2/dss/hdmi_wp.c
> diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
> similarity index 100%
> rename from drivers/video/omap2/dss/manager-sysfs.c
> rename to drivers/video/fbdev/omap2/dss/manager-sysfs.c
> diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/fbdev/omap2/dss/manager.c
> similarity index 100%
> rename from drivers/video/omap2/dss/manager.c
> rename to drivers/video/fbdev/omap2/dss/manager.c
> diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/fbdev/omap2/dss/output.c
> similarity index 100%
> rename from drivers/video/omap2/dss/output.c
> rename to drivers/video/fbdev/omap2/dss/output.c
> diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
> similarity index 100%
> rename from drivers/video/omap2/dss/overlay-sysfs.c
> rename to drivers/video/fbdev/omap2/dss/overlay-sysfs.c
> diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/fbdev/omap2/dss/overlay.c
> similarity index 100%
> rename from drivers/video/omap2/dss/overlay.c
> rename to drivers/video/fbdev/omap2/dss/overlay.c
> diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/fbdev/omap2/dss/rfbi.c
> similarity index 100%
> rename from drivers/video/omap2/dss/rfbi.c
> rename to drivers/video/fbdev/omap2/dss/rfbi.c
> diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
> similarity index 100%
> rename from drivers/video/omap2/dss/sdi.c
> rename to drivers/video/fbdev/omap2/dss/sdi.c
> diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/fbdev/omap2/dss/venc.c
> similarity index 100%
> rename from drivers/video/omap2/dss/venc.c
> rename to drivers/video/fbdev/omap2/dss/venc.c
> diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
> similarity index 100%
> rename from drivers/video/omap2/dss/venc_panel.c
> rename to drivers/video/fbdev/omap2/dss/venc_panel.c
> diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
> similarity index 100%
> rename from drivers/video/omap2/omapfb/Kconfig
> rename to drivers/video/fbdev/omap2/omapfb/Kconfig
> diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/fbdev/omap2/omapfb/Makefile
> similarity index 100%
> rename from drivers/video/omap2/omapfb/Makefile
> rename to drivers/video/fbdev/omap2/omapfb/Makefile
> diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
> similarity index 100%
> rename from drivers/video/omap2/omapfb/omapfb-ioctl.c
> rename to drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
> diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
> similarity index 100%
> rename from drivers/video/omap2/omapfb/omapfb-main.c
> rename to drivers/video/fbdev/omap2/omapfb/omapfb-main.c
> diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
> similarity index 100%
> rename from drivers/video/omap2/omapfb/omapfb-sysfs.c
> rename to drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
> diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/fbdev/omap2/omapfb/omapfb.h
> similarity index 100%
> rename from drivers/video/omap2/omapfb/omapfb.h
> rename to drivers/video/fbdev/omap2/omapfb/omapfb.h
> diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/fbdev/omap2/vrfb.c
> similarity index 100%
> rename from drivers/video/omap2/vrfb.c
> rename to drivers/video/fbdev/omap2/vrfb.c
> diff --git a/drivers/video/p9100.c b/drivers/video/fbdev/p9100.c
> similarity index 100%
> rename from drivers/video/p9100.c
> rename to drivers/video/fbdev/p9100.c
> diff --git a/drivers/video/platinumfb.c b/drivers/video/fbdev/platinumfb.c
> similarity index 100%
> rename from drivers/video/platinumfb.c
> rename to drivers/video/fbdev/platinumfb.c
> diff --git a/drivers/video/platinumfb.h b/drivers/video/fbdev/platinumfb.h
> similarity index 100%
> rename from drivers/video/platinumfb.h
> rename to drivers/video/fbdev/platinumfb.h
> diff --git a/drivers/video/pm2fb.c b/drivers/video/fbdev/pm2fb.c
> similarity index 100%
> rename from drivers/video/pm2fb.c
> rename to drivers/video/fbdev/pm2fb.c
> diff --git a/drivers/video/pm3fb.c b/drivers/video/fbdev/pm3fb.c
> similarity index 100%
> rename from drivers/video/pm3fb.c
> rename to drivers/video/fbdev/pm3fb.c
> diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/fbdev/pmag-aa-fb.c
> similarity index 100%
> rename from drivers/video/pmag-aa-fb.c
> rename to drivers/video/fbdev/pmag-aa-fb.c
> diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c
> similarity index 100%
> rename from drivers/video/pmag-ba-fb.c
> rename to drivers/video/fbdev/pmag-ba-fb.c
> diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/fbdev/pmagb-b-fb.c
> similarity index 100%
> rename from drivers/video/pmagb-b-fb.c
> rename to drivers/video/fbdev/pmagb-b-fb.c
> diff --git a/drivers/video/ps3fb.c b/drivers/video/fbdev/ps3fb.c
> similarity index 100%
> rename from drivers/video/ps3fb.c
> rename to drivers/video/fbdev/ps3fb.c
> diff --git a/drivers/video/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
> similarity index 100%
> rename from drivers/video/pvr2fb.c
> rename to drivers/video/fbdev/pvr2fb.c
> diff --git a/drivers/video/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c
> similarity index 100%
> rename from drivers/video/pxa168fb.c
> rename to drivers/video/fbdev/pxa168fb.c
> diff --git a/drivers/video/pxa168fb.h b/drivers/video/fbdev/pxa168fb.h
> similarity index 100%
> rename from drivers/video/pxa168fb.h
> rename to drivers/video/fbdev/pxa168fb.h
> diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
> similarity index 100%
> rename from drivers/video/pxa3xx-gcu.c
> rename to drivers/video/fbdev/pxa3xx-gcu.c
> diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/fbdev/pxa3xx-gcu.h
> similarity index 100%
> rename from drivers/video/pxa3xx-gcu.h
> rename to drivers/video/fbdev/pxa3xx-gcu.h
> diff --git a/drivers/video/pxafb.c b/drivers/video/fbdev/pxafb.c
> similarity index 100%
> rename from drivers/video/pxafb.c
> rename to drivers/video/fbdev/pxafb.c
> diff --git a/drivers/video/pxafb.h b/drivers/video/fbdev/pxafb.h
> similarity index 100%
> rename from drivers/video/pxafb.h
> rename to drivers/video/fbdev/pxafb.h
> diff --git a/drivers/video/q40fb.c b/drivers/video/fbdev/q40fb.c
> similarity index 100%
> rename from drivers/video/q40fb.c
> rename to drivers/video/fbdev/q40fb.c
> diff --git a/drivers/video/riva/Makefile b/drivers/video/fbdev/riva/Makefile
> similarity index 100%
> rename from drivers/video/riva/Makefile
> rename to drivers/video/fbdev/riva/Makefile
> diff --git a/drivers/video/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
> similarity index 100%
> rename from drivers/video/riva/fbdev.c
> rename to drivers/video/fbdev/riva/fbdev.c
> diff --git a/drivers/video/riva/nv_driver.c b/drivers/video/fbdev/riva/nv_driver.c
> similarity index 100%
> rename from drivers/video/riva/nv_driver.c
> rename to drivers/video/fbdev/riva/nv_driver.c
> diff --git a/drivers/video/riva/nv_type.h b/drivers/video/fbdev/riva/nv_type.h
> similarity index 100%
> rename from drivers/video/riva/nv_type.h
> rename to drivers/video/fbdev/riva/nv_type.h
> diff --git a/drivers/video/riva/nvreg.h b/drivers/video/fbdev/riva/nvreg.h
> similarity index 100%
> rename from drivers/video/riva/nvreg.h
> rename to drivers/video/fbdev/riva/nvreg.h
> diff --git a/drivers/video/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
> similarity index 100%
> rename from drivers/video/riva/riva_hw.c
> rename to drivers/video/fbdev/riva/riva_hw.c
> diff --git a/drivers/video/riva/riva_hw.h b/drivers/video/fbdev/riva/riva_hw.h
> similarity index 100%
> rename from drivers/video/riva/riva_hw.h
> rename to drivers/video/fbdev/riva/riva_hw.h
> diff --git a/drivers/video/riva/riva_tbl.h b/drivers/video/fbdev/riva/riva_tbl.h
> similarity index 100%
> rename from drivers/video/riva/riva_tbl.h
> rename to drivers/video/fbdev/riva/riva_tbl.h
> diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/fbdev/riva/rivafb-i2c.c
> similarity index 100%
> rename from drivers/video/riva/rivafb-i2c.c
> rename to drivers/video/fbdev/riva/rivafb-i2c.c
> diff --git a/drivers/video/riva/rivafb.h b/drivers/video/fbdev/riva/rivafb.h
> similarity index 100%
> rename from drivers/video/riva/rivafb.h
> rename to drivers/video/fbdev/riva/rivafb.h
> diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c
> similarity index 100%
> rename from drivers/video/s1d13xxxfb.c
> rename to drivers/video/fbdev/s1d13xxxfb.c
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c
> similarity index 100%
> rename from drivers/video/s3c-fb.c
> rename to drivers/video/fbdev/s3c-fb.c
> diff --git a/drivers/video/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
> similarity index 100%
> rename from drivers/video/s3c2410fb.c
> rename to drivers/video/fbdev/s3c2410fb.c
> diff --git a/drivers/video/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
> similarity index 100%
> rename from drivers/video/s3c2410fb.h
> rename to drivers/video/fbdev/s3c2410fb.h
> diff --git a/drivers/video/s3fb.c b/drivers/video/fbdev/s3fb.c
> similarity index 100%
> rename from drivers/video/s3fb.c
> rename to drivers/video/fbdev/s3fb.c
> diff --git a/drivers/video/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
> similarity index 100%
> rename from drivers/video/sa1100fb.c
> rename to drivers/video/fbdev/sa1100fb.c
> diff --git a/drivers/video/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
> similarity index 100%
> rename from drivers/video/sa1100fb.h
> rename to drivers/video/fbdev/sa1100fb.h
> diff --git a/drivers/video/savage/Makefile b/drivers/video/fbdev/savage/Makefile
> similarity index 100%
> rename from drivers/video/savage/Makefile
> rename to drivers/video/fbdev/savage/Makefile
> diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
> similarity index 100%
> rename from drivers/video/savage/savagefb-i2c.c
> rename to drivers/video/fbdev/savage/savagefb-i2c.c
> diff --git a/drivers/video/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
> similarity index 100%
> rename from drivers/video/savage/savagefb.h
> rename to drivers/video/fbdev/savage/savagefb.h
> diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
> similarity index 100%
> rename from drivers/video/savage/savagefb_accel.c
> rename to drivers/video/fbdev/savage/savagefb_accel.c
> diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
> similarity index 100%
> rename from drivers/video/savage/savagefb_driver.c
> rename to drivers/video/fbdev/savage/savagefb_driver.c
> diff --git a/drivers/video/sbuslib.c b/drivers/video/fbdev/sbuslib.c
> similarity index 100%
> rename from drivers/video/sbuslib.c
> rename to drivers/video/fbdev/sbuslib.c
> diff --git a/drivers/video/sbuslib.h b/drivers/video/fbdev/sbuslib.h
> similarity index 100%
> rename from drivers/video/sbuslib.h
> rename to drivers/video/fbdev/sbuslib.h
> diff --git a/drivers/video/sgivwfb.c b/drivers/video/fbdev/sgivwfb.c
> similarity index 100%
> rename from drivers/video/sgivwfb.c
> rename to drivers/video/fbdev/sgivwfb.c
> diff --git a/drivers/video/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
> similarity index 100%
> rename from drivers/video/sh7760fb.c
> rename to drivers/video/fbdev/sh7760fb.c
> diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/fbdev/sh_mipi_dsi.c
> similarity index 100%
> rename from drivers/video/sh_mipi_dsi.c
> rename to drivers/video/fbdev/sh_mipi_dsi.c
> diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/fbdev/sh_mobile_hdmi.c
> similarity index 100%
> rename from drivers/video/sh_mobile_hdmi.c
> rename to drivers/video/fbdev/sh_mobile_hdmi.c
> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
> similarity index 100%
> rename from drivers/video/sh_mobile_lcdcfb.c
> rename to drivers/video/fbdev/sh_mobile_lcdcfb.c
> diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/fbdev/sh_mobile_lcdcfb.h
> similarity index 100%
> rename from drivers/video/sh_mobile_lcdcfb.h
> rename to drivers/video/fbdev/sh_mobile_lcdcfb.h
> diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c
> similarity index 100%
> rename from drivers/video/sh_mobile_meram.c
> rename to drivers/video/fbdev/sh_mobile_meram.c
> diff --git a/drivers/video/simplefb.c b/drivers/video/fbdev/simplefb.c
> similarity index 100%
> rename from drivers/video/simplefb.c
> rename to drivers/video/fbdev/simplefb.c
> diff --git a/drivers/video/sis/300vtbl.h b/drivers/video/fbdev/sis/300vtbl.h
> similarity index 100%
> rename from drivers/video/sis/300vtbl.h
> rename to drivers/video/fbdev/sis/300vtbl.h
> diff --git a/drivers/video/sis/310vtbl.h b/drivers/video/fbdev/sis/310vtbl.h
> similarity index 100%
> rename from drivers/video/sis/310vtbl.h
> rename to drivers/video/fbdev/sis/310vtbl.h
> diff --git a/drivers/video/sis/Makefile b/drivers/video/fbdev/sis/Makefile
> similarity index 100%
> rename from drivers/video/sis/Makefile
> rename to drivers/video/fbdev/sis/Makefile
> diff --git a/drivers/video/sis/init.c b/drivers/video/fbdev/sis/init.c
> similarity index 100%
> rename from drivers/video/sis/init.c
> rename to drivers/video/fbdev/sis/init.c
> diff --git a/drivers/video/sis/init.h b/drivers/video/fbdev/sis/init.h
> similarity index 100%
> rename from drivers/video/sis/init.h
> rename to drivers/video/fbdev/sis/init.h
> diff --git a/drivers/video/sis/init301.c b/drivers/video/fbdev/sis/init301.c
> similarity index 100%
> rename from drivers/video/sis/init301.c
> rename to drivers/video/fbdev/sis/init301.c
> diff --git a/drivers/video/sis/init301.h b/drivers/video/fbdev/sis/init301.h
> similarity index 100%
> rename from drivers/video/sis/init301.h
> rename to drivers/video/fbdev/sis/init301.h
> diff --git a/drivers/video/sis/initdef.h b/drivers/video/fbdev/sis/initdef.h
> similarity index 100%
> rename from drivers/video/sis/initdef.h
> rename to drivers/video/fbdev/sis/initdef.h
> diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/fbdev/sis/initextlfb.c
> similarity index 100%
> rename from drivers/video/sis/initextlfb.c
> rename to drivers/video/fbdev/sis/initextlfb.c
> diff --git a/drivers/video/sis/oem300.h b/drivers/video/fbdev/sis/oem300.h
> similarity index 100%
> rename from drivers/video/sis/oem300.h
> rename to drivers/video/fbdev/sis/oem300.h
> diff --git a/drivers/video/sis/oem310.h b/drivers/video/fbdev/sis/oem310.h
> similarity index 100%
> rename from drivers/video/sis/oem310.h
> rename to drivers/video/fbdev/sis/oem310.h
> diff --git a/drivers/video/sis/sis.h b/drivers/video/fbdev/sis/sis.h
> similarity index 100%
> rename from drivers/video/sis/sis.h
> rename to drivers/video/fbdev/sis/sis.h
> diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
> similarity index 100%
> rename from drivers/video/sis/sis_accel.c
> rename to drivers/video/fbdev/sis/sis_accel.c
> diff --git a/drivers/video/sis/sis_accel.h b/drivers/video/fbdev/sis/sis_accel.h
> similarity index 100%
> rename from drivers/video/sis/sis_accel.h
> rename to drivers/video/fbdev/sis/sis_accel.h
> diff --git a/drivers/video/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
> similarity index 100%
> rename from drivers/video/sis/sis_main.c
> rename to drivers/video/fbdev/sis/sis_main.c
> diff --git a/drivers/video/sis/sis_main.h b/drivers/video/fbdev/sis/sis_main.h
> similarity index 100%
> rename from drivers/video/sis/sis_main.h
> rename to drivers/video/fbdev/sis/sis_main.h
> diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/fbdev/sis/vgatypes.h
> similarity index 100%
> rename from drivers/video/sis/vgatypes.h
> rename to drivers/video/fbdev/sis/vgatypes.h
> diff --git a/drivers/video/sis/vstruct.h b/drivers/video/fbdev/sis/vstruct.h
> similarity index 100%
> rename from drivers/video/sis/vstruct.h
> rename to drivers/video/fbdev/sis/vstruct.h
> diff --git a/drivers/video/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
> similarity index 100%
> rename from drivers/video/skeletonfb.c
> rename to drivers/video/fbdev/skeletonfb.c
> diff --git a/drivers/video/sm501fb.c b/drivers/video/fbdev/sm501fb.c
> similarity index 100%
> rename from drivers/video/sm501fb.c
> rename to drivers/video/fbdev/sm501fb.c
> diff --git a/drivers/video/smscufx.c b/drivers/video/fbdev/smscufx.c
> similarity index 100%
> rename from drivers/video/smscufx.c
> rename to drivers/video/fbdev/smscufx.c
> diff --git a/drivers/video/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
> similarity index 100%
> rename from drivers/video/ssd1307fb.c
> rename to drivers/video/fbdev/ssd1307fb.c
> diff --git a/drivers/video/sstfb.c b/drivers/video/fbdev/sstfb.c
> similarity index 100%
> rename from drivers/video/sstfb.c
> rename to drivers/video/fbdev/sstfb.c
> diff --git a/drivers/video/sticore.h b/drivers/video/fbdev/sticore.h
> similarity index 100%
> rename from drivers/video/sticore.h
> rename to drivers/video/fbdev/sticore.h
> diff --git a/drivers/video/stifb.c b/drivers/video/fbdev/stifb.c
> similarity index 100%
> rename from drivers/video/stifb.c
> rename to drivers/video/fbdev/stifb.c
> diff --git a/drivers/video/sunxvr1000.c b/drivers/video/fbdev/sunxvr1000.c
> similarity index 100%
> rename from drivers/video/sunxvr1000.c
> rename to drivers/video/fbdev/sunxvr1000.c
> diff --git a/drivers/video/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c
> similarity index 100%
> rename from drivers/video/sunxvr2500.c
> rename to drivers/video/fbdev/sunxvr2500.c
> diff --git a/drivers/video/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c
> similarity index 100%
> rename from drivers/video/sunxvr500.c
> rename to drivers/video/fbdev/sunxvr500.c
> diff --git a/drivers/video/svgalib.c b/drivers/video/fbdev/svgalib.c
> similarity index 100%
> rename from drivers/video/svgalib.c
> rename to drivers/video/fbdev/svgalib.c
> diff --git a/drivers/video/syscopyarea.c b/drivers/video/fbdev/syscopyarea.c
> similarity index 100%
> rename from drivers/video/syscopyarea.c
> rename to drivers/video/fbdev/syscopyarea.c
> diff --git a/drivers/video/sysfillrect.c b/drivers/video/fbdev/sysfillrect.c
> similarity index 100%
> rename from drivers/video/sysfillrect.c
> rename to drivers/video/fbdev/sysfillrect.c
> diff --git a/drivers/video/sysimgblt.c b/drivers/video/fbdev/sysimgblt.c
> similarity index 100%
> rename from drivers/video/sysimgblt.c
> rename to drivers/video/fbdev/sysimgblt.c
> diff --git a/drivers/video/tcx.c b/drivers/video/fbdev/tcx.c
> similarity index 100%
> rename from drivers/video/tcx.c
> rename to drivers/video/fbdev/tcx.c
> diff --git a/drivers/video/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
> similarity index 100%
> rename from drivers/video/tdfxfb.c
> rename to drivers/video/fbdev/tdfxfb.c
> diff --git a/drivers/video/tgafb.c b/drivers/video/fbdev/tgafb.c
> similarity index 100%
> rename from drivers/video/tgafb.c
> rename to drivers/video/fbdev/tgafb.c
> diff --git a/drivers/video/tmiofb.c b/drivers/video/fbdev/tmiofb.c
> similarity index 100%
> rename from drivers/video/tmiofb.c
> rename to drivers/video/fbdev/tmiofb.c
> diff --git a/drivers/video/tridentfb.c b/drivers/video/fbdev/tridentfb.c
> similarity index 100%
> rename from drivers/video/tridentfb.c
> rename to drivers/video/fbdev/tridentfb.c
> diff --git a/drivers/video/udlfb.c b/drivers/video/fbdev/udlfb.c
> similarity index 100%
> rename from drivers/video/udlfb.c
> rename to drivers/video/fbdev/udlfb.c
> diff --git a/drivers/video/uvesafb.c b/drivers/video/fbdev/uvesafb.c
> similarity index 100%
> rename from drivers/video/uvesafb.c
> rename to drivers/video/fbdev/uvesafb.c
> diff --git a/drivers/video/valkyriefb.c b/drivers/video/fbdev/valkyriefb.c
> similarity index 100%
> rename from drivers/video/valkyriefb.c
> rename to drivers/video/fbdev/valkyriefb.c
> diff --git a/drivers/video/valkyriefb.h b/drivers/video/fbdev/valkyriefb.h
> similarity index 100%
> rename from drivers/video/valkyriefb.h
> rename to drivers/video/fbdev/valkyriefb.h
> diff --git a/drivers/video/vermilion/Makefile b/drivers/video/fbdev/vermilion/Makefile
> similarity index 100%
> rename from drivers/video/vermilion/Makefile
> rename to drivers/video/fbdev/vermilion/Makefile
> diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c
> similarity index 100%
> rename from drivers/video/vermilion/cr_pll.c
> rename to drivers/video/fbdev/vermilion/cr_pll.c
> diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
> similarity index 100%
> rename from drivers/video/vermilion/vermilion.c
> rename to drivers/video/fbdev/vermilion/vermilion.c
> diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/fbdev/vermilion/vermilion.h
> similarity index 100%
> rename from drivers/video/vermilion/vermilion.h
> rename to drivers/video/fbdev/vermilion/vermilion.h
> diff --git a/drivers/video/vesafb.c b/drivers/video/fbdev/vesafb.c
> similarity index 100%
> rename from drivers/video/vesafb.c
> rename to drivers/video/fbdev/vesafb.c
> diff --git a/drivers/video/vfb.c b/drivers/video/fbdev/vfb.c
> similarity index 100%
> rename from drivers/video/vfb.c
> rename to drivers/video/fbdev/vfb.c
> diff --git a/drivers/video/vga16fb.c b/drivers/video/fbdev/vga16fb.c
> similarity index 100%
> rename from drivers/video/vga16fb.c
> rename to drivers/video/fbdev/vga16fb.c
> diff --git a/drivers/video/via/Makefile b/drivers/video/fbdev/via/Makefile
> similarity index 100%
> rename from drivers/video/via/Makefile
> rename to drivers/video/fbdev/via/Makefile
> diff --git a/drivers/video/via/accel.c b/drivers/video/fbdev/via/accel.c
> similarity index 100%
> rename from drivers/video/via/accel.c
> rename to drivers/video/fbdev/via/accel.c
> diff --git a/drivers/video/via/accel.h b/drivers/video/fbdev/via/accel.h
> similarity index 100%
> rename from drivers/video/via/accel.h
> rename to drivers/video/fbdev/via/accel.h
> diff --git a/drivers/video/via/chip.h b/drivers/video/fbdev/via/chip.h
> similarity index 100%
> rename from drivers/video/via/chip.h
> rename to drivers/video/fbdev/via/chip.h
> diff --git a/drivers/video/via/debug.h b/drivers/video/fbdev/via/debug.h
> similarity index 100%
> rename from drivers/video/via/debug.h
> rename to drivers/video/fbdev/via/debug.h
> diff --git a/drivers/video/via/dvi.c b/drivers/video/fbdev/via/dvi.c
> similarity index 100%
> rename from drivers/video/via/dvi.c
> rename to drivers/video/fbdev/via/dvi.c
> diff --git a/drivers/video/via/dvi.h b/drivers/video/fbdev/via/dvi.h
> similarity index 100%
> rename from drivers/video/via/dvi.h
> rename to drivers/video/fbdev/via/dvi.h
> diff --git a/drivers/video/via/global.c b/drivers/video/fbdev/via/global.c
> similarity index 100%
> rename from drivers/video/via/global.c
> rename to drivers/video/fbdev/via/global.c
> diff --git a/drivers/video/via/global.h b/drivers/video/fbdev/via/global.h
> similarity index 100%
> rename from drivers/video/via/global.h
> rename to drivers/video/fbdev/via/global.h
> diff --git a/drivers/video/via/hw.c b/drivers/video/fbdev/via/hw.c
> similarity index 100%
> rename from drivers/video/via/hw.c
> rename to drivers/video/fbdev/via/hw.c
> diff --git a/drivers/video/via/hw.h b/drivers/video/fbdev/via/hw.h
> similarity index 100%
> rename from drivers/video/via/hw.h
> rename to drivers/video/fbdev/via/hw.h
> diff --git a/drivers/video/via/ioctl.c b/drivers/video/fbdev/via/ioctl.c
> similarity index 100%
> rename from drivers/video/via/ioctl.c
> rename to drivers/video/fbdev/via/ioctl.c
> diff --git a/drivers/video/via/ioctl.h b/drivers/video/fbdev/via/ioctl.h
> similarity index 100%
> rename from drivers/video/via/ioctl.h
> rename to drivers/video/fbdev/via/ioctl.h
> diff --git a/drivers/video/via/lcd.c b/drivers/video/fbdev/via/lcd.c
> similarity index 100%
> rename from drivers/video/via/lcd.c
> rename to drivers/video/fbdev/via/lcd.c
> diff --git a/drivers/video/via/lcd.h b/drivers/video/fbdev/via/lcd.h
> similarity index 100%
> rename from drivers/video/via/lcd.h
> rename to drivers/video/fbdev/via/lcd.h
> diff --git a/drivers/video/via/share.h b/drivers/video/fbdev/via/share.h
> similarity index 100%
> rename from drivers/video/via/share.h
> rename to drivers/video/fbdev/via/share.h
> diff --git a/drivers/video/via/tblDPASetting.c b/drivers/video/fbdev/via/tblDPASetting.c
> similarity index 100%
> rename from drivers/video/via/tblDPASetting.c
> rename to drivers/video/fbdev/via/tblDPASetting.c
> diff --git a/drivers/video/via/tblDPASetting.h b/drivers/video/fbdev/via/tblDPASetting.h
> similarity index 100%
> rename from drivers/video/via/tblDPASetting.h
> rename to drivers/video/fbdev/via/tblDPASetting.h
> diff --git a/drivers/video/via/via-core.c b/drivers/video/fbdev/via/via-core.c
> similarity index 100%
> rename from drivers/video/via/via-core.c
> rename to drivers/video/fbdev/via/via-core.c
> diff --git a/drivers/video/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
> similarity index 100%
> rename from drivers/video/via/via-gpio.c
> rename to drivers/video/fbdev/via/via-gpio.c
> diff --git a/drivers/video/via/via_aux.c b/drivers/video/fbdev/via/via_aux.c
> similarity index 100%
> rename from drivers/video/via/via_aux.c
> rename to drivers/video/fbdev/via/via_aux.c
> diff --git a/drivers/video/via/via_aux.h b/drivers/video/fbdev/via/via_aux.h
> similarity index 100%
> rename from drivers/video/via/via_aux.h
> rename to drivers/video/fbdev/via/via_aux.h
> diff --git a/drivers/video/via/via_aux_ch7301.c b/drivers/video/fbdev/via/via_aux_ch7301.c
> similarity index 100%
> rename from drivers/video/via/via_aux_ch7301.c
> rename to drivers/video/fbdev/via/via_aux_ch7301.c
> diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/fbdev/via/via_aux_edid.c
> similarity index 100%
> rename from drivers/video/via/via_aux_edid.c
> rename to drivers/video/fbdev/via/via_aux_edid.c
> diff --git a/drivers/video/via/via_aux_sii164.c b/drivers/video/fbdev/via/via_aux_sii164.c
> similarity index 100%
> rename from drivers/video/via/via_aux_sii164.c
> rename to drivers/video/fbdev/via/via_aux_sii164.c
> diff --git a/drivers/video/via/via_aux_vt1621.c b/drivers/video/fbdev/via/via_aux_vt1621.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1621.c
> rename to drivers/video/fbdev/via/via_aux_vt1621.c
> diff --git a/drivers/video/via/via_aux_vt1622.c b/drivers/video/fbdev/via/via_aux_vt1622.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1622.c
> rename to drivers/video/fbdev/via/via_aux_vt1622.c
> diff --git a/drivers/video/via/via_aux_vt1625.c b/drivers/video/fbdev/via/via_aux_vt1625.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1625.c
> rename to drivers/video/fbdev/via/via_aux_vt1625.c
> diff --git a/drivers/video/via/via_aux_vt1631.c b/drivers/video/fbdev/via/via_aux_vt1631.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1631.c
> rename to drivers/video/fbdev/via/via_aux_vt1631.c
> diff --git a/drivers/video/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1632.c
> rename to drivers/video/fbdev/via/via_aux_vt1632.c
> diff --git a/drivers/video/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c
> similarity index 100%
> rename from drivers/video/via/via_aux_vt1636.c
> rename to drivers/video/fbdev/via/via_aux_vt1636.c
> diff --git a/drivers/video/via/via_clock.c b/drivers/video/fbdev/via/via_clock.c
> similarity index 100%
> rename from drivers/video/via/via_clock.c
> rename to drivers/video/fbdev/via/via_clock.c
> diff --git a/drivers/video/via/via_clock.h b/drivers/video/fbdev/via/via_clock.h
> similarity index 100%
> rename from drivers/video/via/via_clock.h
> rename to drivers/video/fbdev/via/via_clock.h
> diff --git a/drivers/video/via/via_i2c.c b/drivers/video/fbdev/via/via_i2c.c
> similarity index 100%
> rename from drivers/video/via/via_i2c.c
> rename to drivers/video/fbdev/via/via_i2c.c
> diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/fbdev/via/via_modesetting.c
> similarity index 100%
> rename from drivers/video/via/via_modesetting.c
> rename to drivers/video/fbdev/via/via_modesetting.c
> diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/fbdev/via/via_modesetting.h
> similarity index 100%
> rename from drivers/video/via/via_modesetting.h
> rename to drivers/video/fbdev/via/via_modesetting.h
> diff --git a/drivers/video/via/via_utility.c b/drivers/video/fbdev/via/via_utility.c
> similarity index 100%
> rename from drivers/video/via/via_utility.c
> rename to drivers/video/fbdev/via/via_utility.c
> diff --git a/drivers/video/via/via_utility.h b/drivers/video/fbdev/via/via_utility.h
> similarity index 100%
> rename from drivers/video/via/via_utility.h
> rename to drivers/video/fbdev/via/via_utility.h
> diff --git a/drivers/video/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
> similarity index 100%
> rename from drivers/video/via/viafbdev.c
> rename to drivers/video/fbdev/via/viafbdev.c
> diff --git a/drivers/video/via/viafbdev.h b/drivers/video/fbdev/via/viafbdev.h
> similarity index 100%
> rename from drivers/video/via/viafbdev.h
> rename to drivers/video/fbdev/via/viafbdev.h
> diff --git a/drivers/video/via/viamode.c b/drivers/video/fbdev/via/viamode.c
> similarity index 100%
> rename from drivers/video/via/viamode.c
> rename to drivers/video/fbdev/via/viamode.c
> diff --git a/drivers/video/via/viamode.h b/drivers/video/fbdev/via/viamode.h
> similarity index 100%
> rename from drivers/video/via/viamode.h
> rename to drivers/video/fbdev/via/viamode.h
> diff --git a/drivers/video/via/vt1636.c b/drivers/video/fbdev/via/vt1636.c
> similarity index 100%
> rename from drivers/video/via/vt1636.c
> rename to drivers/video/fbdev/via/vt1636.c
> diff --git a/drivers/video/via/vt1636.h b/drivers/video/fbdev/via/vt1636.h
> similarity index 100%
> rename from drivers/video/via/vt1636.h
> rename to drivers/video/fbdev/via/vt1636.h
> diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/fbdev/vt8500lcdfb.c
> similarity index 100%
> rename from drivers/video/vt8500lcdfb.c
> rename to drivers/video/fbdev/vt8500lcdfb.c
> diff --git a/drivers/video/vt8500lcdfb.h b/drivers/video/fbdev/vt8500lcdfb.h
> similarity index 100%
> rename from drivers/video/vt8500lcdfb.h
> rename to drivers/video/fbdev/vt8500lcdfb.h
> diff --git a/drivers/video/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c
> similarity index 100%
> rename from drivers/video/vt8623fb.c
> rename to drivers/video/fbdev/vt8623fb.c
> diff --git a/drivers/video/w100fb.c b/drivers/video/fbdev/w100fb.c
> similarity index 100%
> rename from drivers/video/w100fb.c
> rename to drivers/video/fbdev/w100fb.c
> diff --git a/drivers/video/w100fb.h b/drivers/video/fbdev/w100fb.h
> similarity index 100%
> rename from drivers/video/w100fb.h
> rename to drivers/video/fbdev/w100fb.h
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/fbdev/wm8505fb.c
> similarity index 100%
> rename from drivers/video/wm8505fb.c
> rename to drivers/video/fbdev/wm8505fb.c
> diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/fbdev/wm8505fb_regs.h
> similarity index 100%
> rename from drivers/video/wm8505fb_regs.h
> rename to drivers/video/fbdev/wm8505fb_regs.h
> diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/fbdev/wmt_ge_rops.c
> similarity index 100%
> rename from drivers/video/wmt_ge_rops.c
> rename to drivers/video/fbdev/wmt_ge_rops.c
> diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/fbdev/wmt_ge_rops.h
> similarity index 100%
> rename from drivers/video/wmt_ge_rops.h
> rename to drivers/video/fbdev/wmt_ge_rops.h
> diff --git a/drivers/video/xen-fbfront.c b/drivers/video/fbdev/xen-fbfront.c
> similarity index 100%
> rename from drivers/video/xen-fbfront.c
> rename to drivers/video/fbdev/xen-fbfront.c
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c
> similarity index 100%
> rename from drivers/video/xilinxfb.c
> rename to drivers/video/fbdev/xilinxfb.c
> diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
> deleted file mode 100644
> index 63b23f87081d..000000000000
> --- a/drivers/video/omap2/Kconfig
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -config OMAP2_VRFB
> - bool
> -
> -if ARCH_OMAP2PLUS
> -
> -source "drivers/video/omap2/dss/Kconfig"
> -source "drivers/video/omap2/omapfb/Kconfig"
> -source "drivers/video/omap2/displays-new/Kconfig"
> -
> -endif
> --
> 1.8.3.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-02-14 23:01    [W:2.055 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site