lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: use {readl|writel}_relaxed instead of readl/writel in i2c-designware-core ?
Dear Arnd,

On Fri, 14 Feb 2014 01:09:44 -0800
Arnd Bergmann <arnd@arndb.de> wrote:

> On Friday 14 February 2014 15:54:38 Jisheng Zhang wrote:
> > Hi all,
> >
> > The writel/readl is too expensive especially on Cortex A9 w/ outer L2
> > cache. This introduce i2c read/write error on Marvell Berlin SoCs when
> > there are L2 cache maintenance operations at the same time.
> >
> > In our internal berlin bsp, we just replaced readl/writel with the relaxed
> > version. But AFAIK, the "relaxed" version doesn't exist on all
> > architectures. How to handle this issue?
>
> In case of i2c-designware, this is safe because that driver does not perform
> DMA. In other drivers, you may have to be more careful, to ensure that all
> MMIO is serialized with DMA operations performed by the driver.
>
> > Any suggestions are appreciated.
>
> I would definitely welcome a patch that adds a default _relaxed
> implementation to include/linux/io.h, like this:
>
> #ifndef readb_relaxed
> #define readb_relaxed(p) readb(p)
> #endif
>
> and then adds "#define readb_relaxed(p) readb_relaxed(p)" etc. to all
> architectures that have a non-macro definition for readb.

Thanks for the suggestions. I'll try to send out one RFC patch.

Thanks,
Jisheng


\
 
 \ /
  Last update: 2014-02-14 13:41    [W:0.037 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site