lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: use {readl|writel}_relaxed instead of readl/writel in i2c-designware-core ?
Date
On Friday 14 February 2014 15:54:38 Jisheng Zhang wrote:
> Hi all,
>
> The writel/readl is too expensive especially on Cortex A9 w/ outer L2 cache. This
> introduce i2c read/write error on Marvell Berlin SoCs when there are L2 cache
> maintenance operations at the same time.
>
> In our internal berlin bsp, we just replaced readl/writel with the relaxed
> version. But AFAIK, the "relaxed" version doesn't exist on all architectures. How
> to handle this issue?

In case of i2c-designware, this is safe because that driver does not perform
DMA. In other drivers, you may have to be more careful, to ensure that all MMIO
is serialized with DMA operations performed by the driver.

> Any suggestions are appreciated.

I would definitely welcome a patch that adds a default _relaxed implementation
to include/linux/io.h, like this:

#ifndef readb_relaxed
#define readb_relaxed(p) readb(p)
#endif

and then adds "#define readb_relaxed(p) readb_relaxed(p)" etc. to all
architectures that have a non-macro definition for readb.

Alternatively, we could have a CONFIG_ARCH_MMIO_RELAXED configuration
symbol that gets selected by any architecture that provides the _relaxed
accessors, and get linux/io.h to define all of them for the other
architectures.

Arnd


\
 
 \ /
  Last update: 2014-02-14 10:41    [W:0.082 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site