lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration
On Wed, Feb 12, 2014 at 02:01:01PM +0900, Magnus Damm wrote:
> Hi Geert, Simon,
>
> On Mon, Feb 10, 2014 at 7:47 PM, Geert Uytterhoeven
> <geert@linux-m68k.org> wrote:
> > Hi Simon, Magnus,
> >
> > The following patch series completes r8a7790 SoC and Lager board
> > integration for the Renesas Quad Serial Peripheral Interface. It brings
> > r8a7790/Lager to the same support level as r8a7791/Koelsch, allowing access
> > to the Spansion s25fl512s SPI FLASH for both legacy and multi-platform
> > kernels.
> >
> > [1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups
> > [2/7] ARM: shmobile: lager legacy: Add QSPI pinmux
> > [3/7] ARM: shmobile: r8a7790 dtsi: Add QSPI node
> > [4/7] ARM: shmobile: lager dts: Add QSPI nodes
> > [5/7] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80
>
> Thanks a lot for this! All patches included in this series look great to me.
>
> I noticed that 1/7 turned into a v2, so feel free to omit or include
> the below ack.
>
> Acked-by: Magnus Damm <damm@opensource.se>
>
> > [6/7] ARM: shmobile: lager legacy: Enable Quad SPI transfers for the SPI
> > FLASH
> > [7/7] ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI
> > FLASH
> >
> > Please do _not_ apply patches [6/7] and [7/7] yet, as these have a runtime
> > dependency on Quad SPI support in the RSPI/QSPI driver, which is queued up
> > in the linux-spi tree for v3.15.
>
> That makes sense, thanks for pointing that out. You still have my Ack
> though, so please include that when you resend.
>
> Simon, can you please pick up 2-5?

Done.


\
 
 \ /
  Last update: 2014-02-14 15:41    [W:0.111 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site