Messages in this thread | | | From | Stefan Sørensen <> | Subject | [PATCH v3 0/3] dp83640: Get pin and master/slave configuration from DT | Date | Thu, 13 Feb 2014 15:35:22 +0100 |
| |
This patch series add DT configuration to the DP83640 PHY driver and makes the configuration of periodic output pins dynamic.
Changes since v2: - Add patch to properly configure perout triggers 0+1 - Keep extts and perout numbers separate - Shorten pr_err lines
Changes since v1: - Add bindings documentation - Keep module parameters - Rename gpio->pin - Split patch into DT part and dynamic periodic output support
Stefan Sørensen (3): net:phy:dp83640: Program pulsewidth2 values of perout triggers 0 and 1 net:phy:dp83640: Support a configurable number of periodic outputs net:phy:dp83640: Get pin and master/slave configuration from DT
Documentation/devicetree/bindings/net/dp83640.txt | 29 ++++ drivers/net/phy/dp83640.c | 199 +++++++++++++++------- 2 files changed, 170 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/dp83640.txt
-- 1.8.5.3
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |