lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x
On Thu, Feb 13, 2014 at 11:03:14AM +0000, Lee Jones wrote:
> > > The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
> > > devices. It has 2 ports which it can use for either; both SATA, both
> > > PCIe or one of each in any configuration.
> > >
> > > Cc: devicetree@vger.kernel.org
> > > Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
> > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > > ---
> > > .../devicetree/bindings/phy/phy-miphy365x.txt | 43 ++++++++++++++++++++++
> > > 1 file changed, 43 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> > > new file mode 100644
> > > index 0000000..fdfa7ca
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> > > @@ -0,0 +1,43 @@
> > > +STMicroelectronics STi MIPHY365x PHY binding
> > > +============================================
> > > +
> > > +This binding describes a miphy device that is used to control PHY hardware
> > > +for SATA and PCIe.
> > > +
> > > +Required properties:
> > > +- compatible: Should be "st,miphy365x-phy"
> > > +- #phy-cells: Should be 2 (See example)
> > The first example has #phy-cells = <1>.
>
> Right, will fix. Should be 2.
>
> > What do the cells mean? What are the expected values?
>
> http://www.spinics.net/lists/arm-kernel/msg307209.html

Ok. Could that be mentioned in the binding document then?

Cheers,
Mark.


\
 
 \ /
  Last update: 2014-02-13 14:01    [W:0.088 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site