lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usbnet: remove generic hard_header_len check
On Thu, Feb 13, 2014 at 10:05:39AM +0100, Bjørn Mork wrote:
> Emil Goode <emilgoode@gmail.com> writes:
>
> > This patch removes a generic hard_header_len check from the usbnet
> > module that is causing dropped packages under certain circumstances
> > for devices that send rx packets that cross urb boundaries.
> >
> > One example is the AX88772B which occasionally send rx packets that
> > cross urb boundaries where the remaining partial packet is sent with
> > no hardware header. When the buffer with a partial packet is of less
> > number of octets than the value of hard_header_len the buffer is
> > discarded by the usbnet module.
> >
> > With AX88772B this can be reproduced by using ping with a packet
> > size between 1965-1976.
> >
> > The bug has been reported here:
> >
> > https://bugzilla.kernel.org/show_bug.cgi?id=29082
> >
> > This patch introduces the following changes:
> > - Removes the generic hard_header_len check in the rx_complete
> > function in the usbnet module.
> > - Introduces a ETH_HLEN check for skbs that are not cloned from
> > within a rx_fixup callback.
> > - For safety a hard_header_len check is added to each rx_fixup
> > callback function that could be affected by this change.
> > These extra checks could possibly be removed by someone
> > who has the hardware to test.
> >
> > The changes place full responsibility on the rx_fixup callback
> > functions that clone skbs to only pass valid skbs to the
> > usbnet_skb_return function.
> >
> > Signed-off-by: Emil Goode <emilgoode@gmail.com>
> > Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
>
>
> Great work! Looks good to me.

Thank you :)

> Just a couple of questions:
>
> > diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> > index ff5c871..b2e2aee 100644
> > --- a/drivers/net/usb/qmi_wwan.c
> > +++ b/drivers/net/usb/qmi_wwan.c
> > @@ -80,10 +80,10 @@ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
> > {
> > __be16 proto;
> >
> > - /* usbnet rx_complete guarantees that skb->len is at least
> > - * hard_header_len, so we can inspect the dest address without
> > - * checking skb->len
> > - */
> > + /* This check is no longer done by usbnet */
> > + if (skb->len < dev->net->hard_header_len)
> > + return 0;
> > +
> > switch (skb->data[0] & 0xf0) {
> > case 0x40:
> > proto = htons(ETH_P_IP);
> > diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
> > index a48bc0f..524a47a 100644
> > --- a/drivers/net/usb/rndis_host.c
> > +++ b/drivers/net/usb/rndis_host.c
> > @@ -492,6 +492,10 @@ EXPORT_SYMBOL_GPL(rndis_unbind);
> > */
> > int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
> > {
> > + /* This check is no longer done by usbnet */
> > + if (skb->len < dev->net->hard_header_len)
> > + return 0;
> > +
>
> Wouldn't it be better to test against ETH_HLEN, since that is a constant
> and "obviously correct" in this case?

Some minidrivers change the default hard_header_len value so using it
guarantees that the patch will not make any change to how the code is
currently working. Using ETH_HLEN could be more informative about what
the minidriver should check before passing skbs to usbnet_skb_return().
Then I think the comment should be changed as well. My intention was to
not make any changes that affect how the code works for devices I cannot
test, but I think either way is fine and if you insist on changing it
let me know.

> > diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
> > index 4671da7..dd10d58 100644
> > --- a/drivers/net/usb/usbnet.c
> > +++ b/drivers/net/usb/usbnet.c
> > @@ -542,17 +542,19 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
> > }
> > // else network stack removes extra byte if we forced a short packet
> >
> > - if (skb->len) {
> > - /* all data was already cloned from skb inside the driver */
> > - if (dev->driver_info->flags & FLAG_MULTI_PACKET)
> > - dev_kfree_skb_any(skb);
> > - else
> > - usbnet_skb_return(dev, skb);
> > + /* all data was already cloned from skb inside the driver */
> > + if (dev->driver_info->flags & FLAG_MULTI_PACKET)
> > + goto done;
> > +
> > + if (skb->len < ETH_HLEN) {
> > + dev->net->stats.rx_errors++;
> > + dev->net->stats.rx_length_errors++;
> > + netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
> > + } else {
> > + usbnet_skb_return(dev, skb);
> > return;
> > }
> >
> > - netif_dbg(dev, rx_err, dev->net, "drop\n");
> > - dev->net->stats.rx_errors++;
> > done:
> > skb_queue_tail(&dev->done, skb);
> > }
>
>
> At first glance I wondered where the dev_kfree_skb_any(skb) went. But
> then I realized that you leave that to the common rx_cleanup path, using
> the dev->done queue. Is that right? If so, then I guess it could use a
> bit of explaining in the commit message?

Yes I should have put a comment in the changelog about this. All skbs that
are passed to rx_process have their state set to rx_cleanup and just because
the skb was cloned doesn't mean that we should free the original in a
different way. As it is I think we are acctually missing a call to
usb_free_urb that is called on the common rx_cleanup path.
I will resend and add a comment about this.

Best regards,

Emil Goode
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-13 13:01    [W:0.063 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site