lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/7] devicetree: bindings: Document PM8921/8058 PMICs
> > > +- interrupts:
> > > + Usage: required
> > > + Value type: <prop-encoded-array>
> >
> > Either provide an example or a comment to see the description of
> > #interrupt-cells
>
> It is part of the example. We also state that the format is
> defined by the interrupt parent binding.

Okay, fair enough.

> > > + Definition: specifies the interrupt that indicates a subdevice
> > > + has generated an interrupt (summary interrupt). The
> > > + format of the specifier is defined by the binding document
> > > + describing the node's interrupt parent.
> > > +
> > > +- #interrupt-cells:
> > > + Usage: required
> > > + Value type : <u32>
> > > + Definition: must be 2. Specifies the number of cells needed to encode
> > > + an interrupt source. The 1st cell contains the interrupt
> > > + number. The 2nd cell is the trigger type and level flags
> > > + encoded as follows:
> > > +
> > > + 1 = low-to-high edge triggered
> > > + 2 = high-to-low edge triggered
> > > + 4 = active high level-sensitive
> > > + 8 = active low level-sensitive
> >
> > Actually I'd prefer if you used the definitions in:
> > dt-bindings/interrupt-controller/irq.h
>
> These match the #defines in that file. I'd like to be explicit
> about the numbers to prevent people from thinking they have to
> use #defines and to match what other irq controllers have done
> (gic, atmel-aic, etc.)

I believe people _do_ have to use the #defines? Is there a good reason
for you not wanting to use them?

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-13 12:41    [W:0.181 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site