lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/14] mfd: sec: Select different RTC regmaps for devices
Date
This patch prepares for adding support for S2MPS14 RTC driver by
selecting different regmaps for S2MPS1X/S5M876X RTC devices.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/sec-core.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 6021c54f74cf..0efa69e123ee 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -199,7 +199,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
- const struct regmap_config *regmap;
+ const struct regmap_config *regmap, *regmap_rtc;
struct sec_pmic_dev *sec_pmic;
int ret;

@@ -233,15 +233,25 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S2MPS11X:
regmap = &s2mps11_regmap_config;
+ /*
+ * The rtc-s5m driver does not support S2MPS11 and there
+ * is no mfd_cell for S2MPS11 RTC device.
+ * However we must pass something to devm_regmap_init_i2c()
+ * so use S5M-like regmap config even though it wouldn't work.
+ */
+ regmap_rtc = &sec_rtc_regmap_config;
break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
+ regmap_rtc = &sec_rtc_regmap_config;
break;
case S5M8767X:
regmap = &s5m8767_regmap_config;
+ regmap_rtc = &sec_rtc_regmap_config;
break;
default:
regmap = &sec_regmap_config;
+ regmap_rtc = &sec_rtc_regmap_config;
break;
}

@@ -260,8 +270,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
}
i2c_set_clientdata(sec_pmic->rtc, sec_pmic);

- sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc,
- &sec_rtc_regmap_config);
+ sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
if (IS_ERR(sec_pmic->regmap_rtc)) {
ret = PTR_ERR(sec_pmic->regmap_rtc);
dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-13 11:41    [W:3.041 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site