lkml.org 
[lkml]   [2014]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH v2 1/3] ASoC: binding: add tdm-slot.txt
On Wed, Feb 12, 2014 at 10:26:52AM +0100, Lars-Peter Clausen wrote:

> The current internal API for TDM is very poor, I don't think we want
> to expose that 1 to 1 to the devicetree. Since this means we'd have
> to support that forever. The first thing is that the semantics of
> snd_soc_dai_set_tdm_slot() are very unclear. E.g. some drivers use a
> zero bit for a active slot, some drivers use a 1 bit for a active

Yes, and if we do end up using masks we need to nail down what's going
on in the DT.

> slot. The second thing is that we are not able to specify which
> channel should be mapped to which slot. You can merely specify
> from/to which slots the CODEC should read/write and then it is up to
> the driver to guess which channel should go to which slot. In my
> opinion a binding that allows to specify a explicit mapping of which
> channel goes to which slot would be much better.

It'd certainly be good to be able to do that, though having a default
would make life easier.

> Also those are four different settings. In my opinion they should
> not be expressed in one property, but rather in four. E.g.
> specifying a tx_mask for a rx only device does not make much sense.

That makes sense.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-02-14 20:01    [W:0.133 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site