Messages in this thread Patch in this message |  | | From | Michal Simek <> | Subject | [PATCH 03/14] net: axienet: Support for RGMII | Date | Wed, 12 Feb 2014 16:55:37 +0100 |
| |
From: Srikanth Thokala <srikanth.thokala@xilinx.com>
This patch adds support for the RGMII. The h/w configuration parameter C_PHY_TYPE, which represents the interface configured in the design, is used to differentiate various interfaces supported by AXI Ethernet.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> ---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 4bfdf8c..3966d83 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -925,9 +925,16 @@ static int axienet_open(struct net_device *ndev) return ret;
if (lp->phy_node) { - lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + if (lp->phy_type == XAE_PHY_TYPE_GMII) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, axienet_adjust_link, 0, PHY_INTERFACE_MODE_GMII); + } else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + axienet_adjust_link, 0, + PHY_INTERFACE_MODE_RGMII_ID); + } + if (!lp->phy_dev) { dev_err(lp->dev, "of_phy_connect() failed\n"); return -ENODEV; -- 1.8.2.3 [unhandled content-type:application/pgp-signature] |  |