lkml.org 
[lkml]   [2014]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v11] gpio: add a driver for the Synopsys DesignWare APB GPIO block
From
On Mon, Feb 10, 2014 at 5:06 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
> Hi Alan, this is starting to look good. I's like an ACK from a DT
> maintainer on the bindings but can't see anything really controversial
> about them.
>
> On Thu, Feb 6, 2014 at 11:06 PM, Alan Tull <delicious.quinoa@gmail.com> wrote:
>
>> +static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
>> +{
>> + struct bgpio_chip *bgc = to_bgpio_chip(gc);
>> + struct dwapb_gpio_port *port = container_of(bgc, struct
>> + dwapb_gpio_port, bgc);
>> + struct dwapb_gpio *gpio = port->gpio;
>> +
>> + return irq_create_mapping(gpio->domain, offset);
>> +}
>
> I think you want to call irq_find_mapping() here. irq_create_mapping()
> should be called for all valid IRQs on probe() instead.
>
>> + ct = irq_gc->chip_types;
>> + ct->chip.irq_ack = irq_gc_ack_set_bit;
>> + ct->chip.irq_mask = irq_gc_mask_set_bit;
>> + ct->chip.irq_unmask = irq_gc_mask_clr_bit;
>> + ct->chip.irq_set_type = dwapb_irq_set_type;
>> + ct->chip.irq_enable = dwapb_irq_enable;
>> + ct->chip.irq_disable = dwapb_irq_disable;
>> + ct->regs.ack = GPIO_PORTA_EOI;
>> + ct->regs.mask = GPIO_INTMASK;
>
> Please add .startup() and .shutdown() callbacks marking the
> respective lines as IRQs, compare to recent patches in the
> GPIO subsystem such as this:
> http://marc.info/?l=linux-gpio&m=138546100215235&w=2
>
> You probably want to call irq_create_mapping() for each
> valid IRQ after registering the chip in this function.

Hi Linus,

Thanks for the feedback. I am working on making these changes. The
startup/shutdown were easy to add.

I am wondering about the change in usage of
irq_find_mapping/irq_create_mapping. It seems like all the GPIO
drivers that use irq domains do it the way I was doing it (that's
where I got the idea in the first place): irq_create_mapping is used
in the to_irq() function. I guess this is a general direction all the
other drivers will be encouraged to go in also?

Regards,
Alan


>
> Yours,
> Linus Walleij


\
 
 \ /
  Last update: 2014-02-12 18:01    [W:0.081 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site