Messages in this thread Patch in this message |  | | From | Michal Simek <> | Subject | [PATCH 06/14] net: axienet: Handle jumbo frames for lesser frame sizes | Date | Wed, 12 Feb 2014 16:55:40 +0100 |
| |
From: Srikanth Thokala <srikanth.thokala@xilinx.com>
In the current implementation, jumbo frames are supported only for the frame sizes > 16K. This patch corrects this logic to handle jumbo frames for lesser frame sizes (< 16K) ensuring jumbo frame MTU is within the limit of max frame size configured in the h/w design.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> ---
drivers/net/ethernet/xilinx/xilinx_axienet.h | 9 ++--- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 46 +++++++++++------------ 2 files changed, 27 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 44b8d2b..b3c50bd 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -11,16 +11,16 @@ #include <linux/netdevice.h> #include <linux/spinlock.h> #include <linux/interrupt.h> +#include <linux/if_vlan.h>
/* Packet size info */ #define XAE_HDR_SIZE 14 /* Size of Ethernet header */ -#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */ #define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ #define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ #define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */
#define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) -#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE) #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
/* Configuration options */ @@ -408,8 +408,7 @@ struct axidma_bd { * Txed/Rxed in the existing hardware. If jumbo option is * supported, the maximum frame size would be 9k. Else it is * 1522 bytes (assuming support for basic VLAN) - * @jumbo_support: Stores hardware configuration for jumbo support. If hardware - * can handle jumbo packets, this entry will be 1, else 0. + * @rxmem: Stores rx memory size for jumbo frame handling. */ struct axienet_local { struct net_device *ndev; @@ -448,7 +447,7 @@ struct axienet_local { u32 rx_bd_ci;
u32 max_frm_size; - u32 jumbo_support; + u32 rxmem;
int csum_offload_on_tx_path; int csum_offload_on_rx_path; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 3c24f97..9595403 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -471,14 +471,16 @@ static void axienet_device_reset(struct net_device *ndev) __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET);
lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; + lp->options |= XAE_OPTION_VLAN; lp->options &= (~XAE_OPTION_JUMBO);
if ((ndev->mtu > XAE_MTU) && - (ndev->mtu <= XAE_JUMBO_MTU) && - (lp->jumbo_support)) { - lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE + - XAE_TRL_SIZE; - lp->options |= XAE_OPTION_JUMBO; + (ndev->mtu <= XAE_JUMBO_MTU)) { + lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN + + XAE_TRL_SIZE; + + if (lp->max_frm_size <= lp->rxmem) + lp->options |= XAE_OPTION_JUMBO; }
if (axienet_dma_bd_init(ndev)) { @@ -1027,15 +1029,15 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu)
if (netif_running(ndev)) return -EBUSY; - if (lp->jumbo_support) { - if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) - return -EINVAL; - ndev->mtu = new_mtu; - } else { - if ((new_mtu > XAE_MTU) || (new_mtu < 64)) - return -EINVAL; - ndev->mtu = new_mtu; - } + + if ((new_mtu + VLAN_ETH_HLEN + + XAE_TRL_SIZE) > lp->rxmem) + return -EINVAL; + + if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) + return -EINVAL; + + ndev->mtu = new_mtu;
return 0; } @@ -1556,16 +1558,14 @@ static int axienet_of_probe(struct platform_device *op) } } /* For supporting jumbo frames, the Axi Ethernet hardware must have - * a larger Rx/Tx Memory. Typically, the size must be more than or - * equal to 16384 bytes, so that we can enable jumbo option and start - * supporting jumbo frames. Here we check for memory allocated for - * Rx/Tx in the hardware from the device-tree and accordingly set - * flags. */ + * a larger Rx/Tx Memory. Typically, the size must be large so that + * we can enable jumbo option and start supporting jumbo frames. + * Here we check for memory allocated for Rx/Tx in the hardware from + * the device-tree and accordingly set flags. + */ p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL); - if (p) { - if ((be32_to_cpup(p)) >= 0x4000) - lp->jumbo_support = 1; - } + if (p) + lp->rxmem = be32_to_cpup(p); p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", NULL); if (p) -- 1.8.2.3 [unhandled content-type:application/pgp-signature] |  |