lkml.org 
[lkml]   [2014]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/8] locking: Introduce qrwlock
On 02/11/2014 01:17 PM, Waiman Long wrote:
> Peter,
>
> I had written a test program to repetitively take a single rwlock with
> programmable number of threads and count their execution times. Each
> thread takes the lock 5M times on a 4-socket 40-core Westmere-EX
> system. I bound all the threads to different CPUs with the following
> 3 configurations:
>
> 1) Both CPUs and lock are in the same node
> 2) CPUs and lock are in different nodes
> 3) Half of the CPUs are in same node as the lock & the other half
> are remote
>
> The results of the test run are as follows (execution times in ms,
> smaller is better, qrwlock uses MCS lock for queuing):
>
> R:W ratio = 0:1 (write lock only)
> ---------------------------------
> # of rwlock mean/std qrwlock mean/std
> threads Local , Remote Local , Remote
> ------- --------------------- ----------------------
> 1 75/ 0, 76/ 0 44/ 0, 44/ 0
> 2 924/ 6, 818/ 11 233/ 22, 685/ 1
> 3 1680/ 67, 1676/ 50 422/ 24, 640/305
> 4 1727/ 402, 1661/ 620 563/ 85, 694/384
> 5 2634/ 861, 2746/ 426 787/276, 829/401
> 6 2969/1196, 2892/ 398 810/307, 968/451
> 7 3532/1512, 3137/1109 936/387, 1060/512
> 8 3979/1698, 4190/1526 1134/590, 1120/503
>
> R:W ratio = 1:1
> ---------------
> # of rwlock mean/std qrwlock mean/std
> threads Local , Remote Local , Remote
> ------- --------------------- ----------------------
> 1 82/ 0, 81/ 0 65/ 0, 65/ 0
> 2 844/ 6, 829/ 1 752/ 4, 894/ 2
> 3 1683/ 65, 1628/ 29 980/ 14, 1046/ 24
> 4 2661/ 65, 1747/ 609 1356/ 16, 1405/ 13
> 5 2227/ 868, 2887/ 395 1625/ 32, 1679/ 29
> 6 2553/ 968, 3924/1319 1935/ 18, 1986/ 65
> 7 3392/1325, 3674/1430 2302/ 41, 2313/ 83
> 8 3822/1545, 5163/2103 2654/ 31, 2654/ 67
>
> R:W ratio = 10:1
> ----------------
> # of rwlock mean/std qrwlock mean/std
> threads Local , Remote Local , Remote
> ------- --------------------- ----------------------
> 1 86/ 0, 86/ 0 83/ 0, 83/ 0
> 2 656/ 2, 640/ 3 546/ 2, 635/ 1
> 3 1154/ 39, 1053/ 64 934/ 27, 968/ 31
> 4 1810/ 26, 1535/ 399 1357/ 34, 1382/ 52
> 5 1994/ 495, 2618/ 27 1713/ 52, 1785/ 47
> 6 2371/ 488, 3099/ 105 2093/ 80, 2131/ 77
> 7 2846/ 751, 3068/ 689 2495/103, 2527/107
> 8 3392/1009, 3566/1017 2899/130, 2928/126
>
> For reference, I also made the same measurement for ticket spinlock with
> essentially no variation in execution time between different threads:
>
> # of spinlock mean
> threads Local, Remote
> ------- -------------
> 1 70, 70
> 2 757, 779
> 3 1892, 1858
> 4 2818, 2794
> 5 3829, 3851
> 6 4957, 5069
> 7 6209, 6251
> 8 7524, 7564
>
> In summary,
>
> 1) The qrwlock is always faster than the rwlock with the exception
> of about 8% slowdown with 1:1 read-write lock ratio and 2 contending
> threads on a remote lock. In the most common case of 1-socket
> system, qrwlock will not be slower than rwlock.
>
> 2) qrwlock has much less variation in execution times (more consistent
> performance) when compared with rwlock.
>
> 3) For rwlock with 2-3 contending threads, remote lock actually
> performs slightly better than local lock.
>
> 4) For qrwlock, local lock performs slightly better than remote lock
> with less variation in execution time.
>
> As for the use of ticket lock for queuing purpose, the spinlock
> performance figures above seem to suggest that it will perform worse
> than MCS lock with even a few contending threads. This is especially
> a problem with contending threads coming from different nodes.
>
> Below are the performance data with half local and half remote CPUs:
>
> # of threads = 8
> R/W ratio rwlock mean/std qrwlock mean/std
> --------- --------------- ----------------
> 0:1 3476/868 1304/484
> 1:1 3452/975 2984/777
> 10:1 3215/914 2963/107
>
> The rwlock actually performs slightly better when CPUs have different
> access
> times to the lock. The qrwlock, on the other hand, performs slightly
> worse
> with much larger variation in execution times.
>
> In the case of ticket spinlock with asymmetric access time (half
> local CPUs, half remote CPUs), the performance data were:
>
> # of threads spinlock mean
> ------------ -------------
> 2 4570
> 4 9927
> 6 15197
> 8 20573
>
> Ticket spinlock seems to be 3-5X slower with asymmetric access time. So
> it may not be such a good idea to replace the MCS lock by a ticket
> lock in qrwlock. I will take some additional measurement with your patch
> to see how it perform.
>
> -Longman
>
Using the same locktest program to repetitively take a single rwlock with
programmable number of threads and count their execution times. Each
thread takes the lock 5M times on a 4-socket 40-core Westmere-EX
system. I bound all the threads to different CPUs with the following
3 configurations:

1) Both CPUs and lock are in the same node
2) CPUs and lock are in different nodes
3) Half of the CPUs are in same node as the lock & the other half
are remote

Two types of qrwlock are tested:
1) Use MCS lock
2) Use ticket lock

The results of the test run are as follows (execution times in ms,
smaller is better):

R:W ratio = 0:1 (write lock only)
---------------------------------
# of ticket lock mean/std MCS lock mean/std
threads Local , Remote Local , Remote
------- --------------------- ----------------------
1 44/ 0, 43/ 0 44/ 0, 44/ 0
2 376/ 21, 504/ 3 231/ 21, 233/ 22
3 969/ 66, 509/ 176 363/ 88, 359/107
4 1689/ 103, 960/ 417 693/263, 502/141
5 2330/ 167, 1575/ 668 769/273, 649/238
6 2802/ 474, 2203/ 884 866/334, 864/329
7 3390/ 499, 2812/1040 1065/461, 1075/316
8 3725/ 613, 3359/1210 1257/552, 1288/493

R:W ratio = 1:1
---------------
# of ticket lock mean/std MCS lock mean/std
threads Local , Remote Local , Remote
------- --------------------- ----------------------
1 66/ 0, 66/ 0 66/ 0, 65/ 0
2 824/ 4, 609/ 13 761/ 2, 774/ 4
3 1440/ 4, 1305/ 57 926/ 19, 989/ 7
4 2080/ 53, 1991/ 58 1371/ 29, 1322/ 33
5 2786/ 71, 2635/ 116 1632/ 82, 1604/ 22
6 3808/ 147, 3584/ 165 1938/102, 1912/ 98
7 4795/ 107, 4593/ 116 2378/ 79, 2279/ 93
8 5498/ 387, 5428/ 370 2614/ 84, 2602/ 63

R:W ratio = 10:1
----------------
# of rwlock mean/std qrwlock mean/std
threads Local , Remote Local , Remote
------- --------------------- ----------------------
1 83/ 0, 84/ 0 83/ 0, 83/ 0
2 577/ 13, 421/ 25 492/ 9, 554/ 1
3 1246/ 16, 1009/ 112 866/ 10, 902/ 49
4 1956/ 29, 1656/ 171 1240/ 33, 1340/ 43
5 2788/ 26, 2480/ 208 1661/ 78, 1685/ 59
6 3723/ 74, 3429/ 207 2068/107, 2064/ 86
7 4629/ 197, 4295/ 303 2484/132, 2464/108
8 5565/ 277, 5406/ 301 2903/161, 2864/135

There are varations in different runs especially for low thread counts.
With ticket lock, remote lock access seems to benefit performance
especially at low thread counts (2 or 3) with corresponding larger
execution time variation. With MCS lock remote lock access generally
yield slightly worse performance. Overall speaking, the only case
where ticket lock performs better is when with 2 contending threads
on a remote lock.

With half local CPUs and half remote CPUs, the performance data were:

R:W ratio = 0:1 (write lock only)
---------------------------------
# of threads ticket lock mean/std MCS lock mean/std
------------ -------------------- ----------------------
2 518/ 22 294/ 11
4 973/295 604/221
6 1465/580 925/446
8 1721/763 1155/528

R:W ratio = 1:1
---------------
# of threads ticket lock mean/std MCS lock mean/std
------------ -------------------- ----------------------
2 578/ 2 605/ 11
4 1436/177 1518/182
6 2254/327 2248/206
8 3097/648 2536/838

R:W ratio = 10:1
----------------
# of threads ticket lock mean/std MCS lock mean/std
------------ -------------------- ----------------------
2 632/ 5 718/ 3
4 1783/153 1733/ 82
6 2815/213 2612/110
8 3911/380 3460/152

Asymmetric access time benefit ticket lock, which performs slightly
better than MCS lock at 2 & 4 threads (1:1) and 2 threads (10:1). For
MCS lock, asymmetric access time makes the performance slightly worse.

-Longman




\
 
 \ /
  Last update: 2014-02-14 18:02    [W:0.086 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site