lkml.org 
[lkml]   [2014]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v8 1/4] mfd: rt5033: Add Richtek RT5033 driver core.
    Date
    This patch adds a new driver for Richtek RT5033 driver.
    RT5033 is a Multifunction device which includes battery charger, fuel gauge,
    flash LED current source, LDO and synchronous Buck converter. It is interfaced
    to host controller using I2C interface.

    Cc: Samuel Ortiz <sameo@linux.intel.com>
    Cc: Lee Jones <lee.jone@linaro.org>
    Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
    Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
    ---
    Changes in v8
    - Add description of hardware.
    - Move structure.

    Changes in v7
    - Use small description.
    - Change some names for a variable.
    - Revise of_device_id struct style.

    Changes in v6
    - Fix white space issue in mfd cell struct.

    Changes in v5
    - Change possible built as a module.
    - Revise rt5033_dev mfd cell entry.
    - Fix incorrect typo.
    - Add module alias.

    Changes in v4
    - none.

    Changes in v3
    - Correct sentence errors.
    - Add author information the top of each drivers.
    - Remove unnecessary pre-initialise, struct member(rt5033->i2c) and blink.
    - Change some return check.
    - Use bool and of_match_ptr().

    Changes in v2
    - Remove volatile_reg callback. Because this driver not in use regmap cache.
    - Revmoe unnecessary subnode of_compatible.
    - Add define for set_high impedance mode of charger.
    ---
    drivers/mfd/Kconfig | 12 ++
    drivers/mfd/Makefile | 1 +
    drivers/mfd/rt5033.c | 142 ++++++++++++++++++++
    include/linux/mfd/rt5033-private.h | 260 ++++++++++++++++++++++++++++++++++++
    include/linux/mfd/rt5033.h | 62 +++++++++
    5 files changed, 477 insertions(+)
    create mode 100644 drivers/mfd/rt5033.c
    create mode 100644 include/linux/mfd/rt5033-private.h
    create mode 100644 include/linux/mfd/rt5033.h

    diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
    index 2e6b731..9cd2af6 100644
    --- a/drivers/mfd/Kconfig
    +++ b/drivers/mfd/Kconfig
    @@ -623,6 +623,18 @@ config MFD_RTSX_PCI
    types of memory cards, such as Memory Stick, Memory Stick Pro,
    Secure Digital and MultiMediaCard.

    +config MFD_RT5033
    + tristate "Richtek RT5033 Power Management IC"
    + depends on I2C=y
    + select MFD_CORE
    + select REGMAP_I2C
    + help
    + This driver provides for the Richtek RT5033 Power Management IC,
    + which includes the I2C driver and the Core APIs. This driver provides
    + common support for accessing the device. The device supports multiple
    + sub-devices like charger, fuel gauge, flash LED, current source,
    + LDO and Buck.
    +
    config MFD_RTSX_USB
    tristate "Realtek USB card reader"
    depends on USB
    diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
    index 53467e2..4059c24 100644
    --- a/drivers/mfd/Makefile
    +++ b/drivers/mfd/Makefile
    @@ -176,6 +176,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
    obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
    obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
    obj-$(CONFIG_MFD_DLN2) += dln2.o
    +obj-$(CONFIG_MFD_RT5033) += rt5033.o

    intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
    obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
    diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
    new file mode 100644
    index 0000000..db395a6
    --- /dev/null
    +++ b/drivers/mfd/rt5033.c
    @@ -0,0 +1,142 @@
    +/*
    + * MFD core driver for the Richtek RT5033.
    + *
    + * RT5033 comprises multiple sub-devices switcing charger, fuel gauge,
    + * flash LED, current source, LDO and BUCK regulators.
    + *
    + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
    + * Author: Beomho Seo <beomho.seo@samsung.com>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published bythe Free Software Foundation.
    + */
    +
    +#include <linux/err.h>
    +#include <linux/module.h>
    +#include <linux/interrupt.h>
    +#include <linux/of_device.h>
    +#include <linux/mfd/core.h>
    +#include <linux/mfd/rt5033.h>
    +#include <linux/mfd/rt5033-private.h>
    +
    +static const struct regmap_irq rt5033_irqs[] = {
    + { .mask = RT5033_PMIC_IRQ_BUCKOCP, },
    + { .mask = RT5033_PMIC_IRQ_BUCKLV, },
    + { .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
    + { .mask = RT5033_PMIC_IRQ_LDOLV, },
    + { .mask = RT5033_PMIC_IRQ_OT, },
    + { .mask = RT5033_PMIC_IRQ_VDDA_UV, },
    +};
    +
    +static const struct regmap_irq_chip rt5033_irq_chip = {
    + .name = "rt5033",
    + .status_base = RT5033_REG_PMIC_IRQ_STAT,
    + .mask_base = RT5033_REG_PMIC_IRQ_CTRL,
    + .mask_invert = true,
    + .num_regs = 1,
    + .irqs = rt5033_irqs,
    + .num_irqs = ARRAY_SIZE(rt5033_irqs),
    +};
    +
    +static const struct mfd_cell rt5033_devs[] = {
    + { .name = "rt5033-regulator", },
    + {
    + .name = "rt5033-charger",
    + .of_compatible = "richtek,rt5033-charger",
    + }, {
    + .name = "rt5033-battery",
    + .of_compatible = "richtek,rt5033-battery",
    + },
    +};
    +
    +static const struct regmap_config rt5033_regmap_config = {
    + .reg_bits = 8,
    + .val_bits = 8,
    + .max_register = RT5033_REG_END,
    +};
    +
    +static int rt5033_i2c_probe(struct i2c_client *i2c,
    + const struct i2c_device_id *id)
    +{
    + struct rt5033_dev *rt5033;
    + unsigned int dev_id;
    + int ret;
    +
    + rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
    + if (!rt5033)
    + return -ENOMEM;
    +
    + i2c_set_clientdata(i2c, rt5033);
    + rt5033->dev = &i2c->dev;
    + rt5033->irq = i2c->irq;
    + rt5033->wakeup = true;
    +
    + rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
    + if (IS_ERR(rt5033->regmap)) {
    + dev_err(&i2c->dev, "Failed to allocate register map.\n");
    + return PTR_ERR(rt5033->regmap);
    + }
    +
    + ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &dev_id);
    + if (ret) {
    + dev_err(&i2c->dev, "Device not found\n");
    + return -ENODEV;
    + }
    + dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id);
    +
    + ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
    + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
    + 0, &rt5033_irq_chip, &rt5033->irq_data);
    + if (ret) {
    + dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
    + rt5033->irq, ret);
    + return ret;
    + }
    +
    + ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs,
    + ARRAY_SIZE(rt5033_devs), NULL, 0,
    + regmap_irq_get_domain(rt5033->irq_data));
    + if (ret < 0) {
    + dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n");
    + return ret;
    + }
    +
    + device_init_wakeup(rt5033->dev, rt5033->wakeup);
    +
    + return 0;
    +}
    +
    +static int rt5033_i2c_remove(struct i2c_client *i2c)
    +{
    + mfd_remove_devices(&i2c->dev);
    +
    + return 0;
    +}
    +
    +static const struct i2c_device_id rt5033_i2c_id[] = {
    + { "rt5033", },
    + { }
    +};
    +MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
    +
    +static const struct of_device_id rt5033_dt_match[] = {
    + { .compatible = "richtek,rt5033", },
    + { }
    +};
    +
    +static struct i2c_driver rt5033_driver = {
    + .driver = {
    + .name = "rt5033",
    + .of_match_table = of_match_ptr(rt5033_dt_match),
    + },
    + .probe = rt5033_i2c_probe,
    + .remove = rt5033_i2c_remove,
    + .id_table = rt5033_i2c_id,
    +};
    +module_i2c_driver(rt5033_driver);
    +
    +MODULE_ALIAS("i2c:rt5033");
    +MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
    +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
    +MODULE_LICENSE("GPL");
    diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
    new file mode 100644
    index 0000000..1b63fc2
    --- /dev/null
    +++ b/include/linux/mfd/rt5033-private.h
    @@ -0,0 +1,260 @@
    +/*
    + * MFD core driver for Richtek RT5033
    + *
    + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
    + * Author: Beomho Seo <beomho.seo@samsung.com>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published bythe Free Software Foundation.
    + */
    +
    +#ifndef __RT5033_PRIVATE_H__
    +#define __RT5033_PRIVATE_H__
    +
    +enum rt5033_reg {
    + RT5033_REG_CHG_STAT = 0x00,
    + RT5033_REG_CHG_CTRL1 = 0x01,
    + RT5033_REG_CHG_CTRL2 = 0x02,
    + RT5033_REG_DEVICE_ID = 0x03,
    + RT5033_REG_CHG_CTRL3 = 0x04,
    + RT5033_REG_CHG_CTRL4 = 0x05,
    + RT5033_REG_CHG_CTRL5 = 0x06,
    + RT5033_REG_RT_CTRL0 = 0x07,
    + RT5033_REG_CHG_RESET = 0x08,
    + /* Reserved 0x09~0x18 */
    + RT5033_REG_RT_CTRL1 = 0x19,
    + /* Reserved 0x1A~0x20 */
    + RT5033_REG_FLED_FUNCTION1 = 0x21,
    + RT5033_REG_FLED_FUNCTION2 = 0x22,
    + RT5033_REG_FLED_STROBE_CTRL1 = 0x23,
    + RT5033_REG_FLED_STROBE_CTRL2 = 0x24,
    + RT5033_REG_FLED_CTRL1 = 0x25,
    + RT5033_REG_FLED_CTRL2 = 0x26,
    + RT5033_REG_FLED_CTRL3 = 0x27,
    + RT5033_REG_FLED_CTRL4 = 0x28,
    + RT5033_REG_FLED_CTRL5 = 0x29,
    + /* Reserved 0x2A~0x40 */
    + RT5033_REG_CTRL = 0x41,
    + RT5033_REG_BUCK_CTRL = 0x42,
    + RT5033_REG_LDO_CTRL = 0x43,
    + /* Reserved 0x44~0x46 */
    + RT5033_REG_MANUAL_RESET_CTRL = 0x47,
    + /* Reserved 0x48~0x5F */
    + RT5033_REG_CHG_IRQ1 = 0x60,
    + RT5033_REG_CHG_IRQ2 = 0x61,
    + RT5033_REG_CHG_IRQ3 = 0x62,
    + RT5033_REG_CHG_IRQ1_CTRL = 0x63,
    + RT5033_REG_CHG_IRQ2_CTRL = 0x64,
    + RT5033_REG_CHG_IRQ3_CTRL = 0x65,
    + RT5033_REG_LED_IRQ_STAT = 0x66,
    + RT5033_REG_LED_IRQ_CTRL = 0x67,
    + RT5033_REG_PMIC_IRQ_STAT = 0x68,
    + RT5033_REG_PMIC_IRQ_CTRL = 0x69,
    + RT5033_REG_SHDN_CTRL = 0x6A,
    + RT5033_REG_OFF_EVENT = 0x6B,
    +
    + RT5033_REG_END,
    +};
    +
    +/* RT5033 Charger state register */
    +#define RT5033_CHG_STAT_MASK 0x20
    +#define RT5033_CHG_STAT_DISCHARGING 0x00
    +#define RT5033_CHG_STAT_FULL 0x10
    +#define RT5033_CHG_STAT_CHARGING 0x20
    +#define RT5033_CHG_STAT_NOT_CHARGING 0x30
    +#define RT5033_CHG_STAT_TYPE_MASK 0x60
    +#define RT5033_CHG_STAT_TYPE_PRE 0x20
    +#define RT5033_CHG_STAT_TYPE_FAST 0x60
    +
    +/* RT5033 CHGCTRL1 register */
    +#define RT5033_CHGCTRL1_IAICR_MASK 0xe0
    +#define RT5033_CHGCTRL1_MODE_MASK 0x01
    +
    +/* RT5033 CHGCTRL2 register */
    +#define RT5033_CHGCTRL2_CV_MASK 0xfc
    +
    +/* RT5033 CHGCTRL3 register */
    +#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40
    +#define RT5033_CHGCTRL3_TIMER_MASK 0x38
    +#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
    +
    +/* RT5033 CHGCTRL4 register */
    +#define RT5033_CHGCTRL4_EOC_MASK 0x07
    +#define RT5033_CHGCTRL4_IPREC_MASK 0x18
    +
    +/* RT5033 CHGCTRL5 register */
    +#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
    +#define RT5033_CHGCTRL5_ICHG_MASK 0xf0
    +#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
    +#define RT5033_CHG_MAX_CURRENT 0x0d
    +
    +/* RT5033 RT CTRL1 register */
    +#define RT5033_RT_CTRL1_UUG_MASK 0x02
    +#define RT5033_RT_HZ_MASK 0x01
    +
    +/* RT5033 control register */
    +#define RT5033_CTRL_FCCM_BUCK_MASK 0x00
    +#define RT5033_CTRL_BUCKOMS_MASK 0x01
    +#define RT5033_CTRL_LDOOMS_MASK 0x02
    +#define RT5033_CTRL_SLDOOMS_MASK 0x03
    +#define RT5033_CTRL_EN_BUCK_MASK 0x04
    +#define RT5033_CTRL_EN_LDO_MASK 0x05
    +#define RT5033_CTRL_EN_SAFE_LDO_MASK 0x06
    +#define RT5033_CTRL_LDO_SLEEP_MASK 0x07
    +
    +/* RT5033 BUCK control register */
    +#define RT5033_BUCK_CTRL_MASK 0x1f
    +
    +/* RT5033 LDO control register */
    +#define RT5033_LDO_CTRL_MASK 0x1f
    +
    +/* RT5033 charger property - model, manufacturer */
    +
    +#define RT5033_CHARGER_MODEL "RT5033WSC Charger"
    +#define RT5033_MANUFACTURER "Richtek Technology Corporation"
    +
    +/*
    + * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
    + * AICR mode limits the input current for example,
    + * the AIRC 100 mode limits the input current to 100 mA.
    + */
    +#define RT5033_AICR_100_MODE 0x20
    +#define RT5033_AICR_500_MODE 0x40
    +#define RT5033_AICR_700_MODE 0x60
    +#define RT5033_AICR_900_MODE 0x80
    +#define RT5033_AICR_1500_MODE 0xc0
    +#define RT5033_AICR_2000_MODE 0xe0
    +#define RT5033_AICR_MODE_MASK 0xe0
    +
    +/* RT5033 use internal timer need to set time */
    +#define RT5033_FAST_CHARGE_TIMER4 0x00
    +#define RT5033_FAST_CHARGE_TIMER6 0x01
    +#define RT5033_FAST_CHARGE_TIMER8 0x02
    +#define RT5033_FAST_CHARGE_TIMER9 0x03
    +#define RT5033_FAST_CHARGE_TIMER12 0x04
    +#define RT5033_FAST_CHARGE_TIMER14 0x05
    +#define RT5033_FAST_CHARGE_TIMER16 0x06
    +
    +#define RT5033_INT_TIMER_ENABLE 0x01
    +
    +/* RT5033 charger termination enable mask */
    +#define RT5033_TE_ENABLE_MASK 0x08
    +
    +/*
    + * RT5033 charger opa mode. RT50300 have two opa mode charger mode
    + * and boost mode for OTG
    + */
    +
    +#define RT5033_CHARGER_MODE 0x00
    +#define RT5033_BOOST_MODE 0x01
    +
    +/* RT5033 charger termination enable */
    +#define RT5033_TE_ENABLE 0x08
    +
    +/* RT5033 charger CFO enable */
    +#define RT5033_CFO_ENABLE 0x40
    +
    +/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
    +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
    +#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
    +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
    +
    +/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
    +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
    +#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
    +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
    +
    +/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
    +#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
    +#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
    +#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
    +
    +/*
    + * RT5033 charger const-charge end of charger current (
    + * as in CHGCTRL4 register), uA
    + */
    +#define RT5033_CHARGER_EOC_MIN 150000U
    +#define RT5033_CHARGER_EOC_REF 300000U
    +#define RT5033_CHARGER_EOC_STEP_NUM1 50000U
    +#define RT5033_CHARGER_EOC_STEP_NUM2 100000U
    +#define RT5033_CHARGER_EOC_MAX 600000U
    +
    +/*
    + * RT5033 charger pre-charge threshold volt limits
    + * (as in CHGCTRL5 register), uV
    + */
    +
    +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN 2300000U
    +#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM 100000U
    +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX 3800000U
    +
    +/*
    + * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
    + * circuit.
    + */
    +#define RT5033_CHARGER_UUG_ENABLE 0x02
    +
    +/* RT5033 charger High impedance mode */
    +#define RT5033_CHARGER_HZ_DISABLE 0x00
    +#define RT5033_CHARGER_HZ_ENABLE 0x01
    +
    +/* RT5033 regulator BUCK output voltage uV */
    +#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U
    +#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U
    +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U
    +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32
    +
    +/* RT5033 regulator LDO output voltage uV */
    +#define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U
    +#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U
    +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U
    +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32
    +
    +/* RT5033 regulator SAFE LDO output voltage uV */
    +#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U
    +
    +enum rt5033_fuel_reg {
    + RT5033_FUEL_REG_OCV_H = 0x00,
    + RT5033_FUEL_REG_OCV_L = 0x01,
    + RT5033_FUEL_REG_VBAT_H = 0x02,
    + RT5033_FUEL_REG_VBAT_L = 0x03,
    + RT5033_FUEL_REG_SOC_H = 0x04,
    + RT5033_FUEL_REG_SOC_L = 0x05,
    + RT5033_FUEL_REG_CTRL_H = 0x06,
    + RT5033_FUEL_REG_CTRL_L = 0x07,
    + RT5033_FUEL_REG_CRATE = 0x08,
    + RT5033_FUEL_REG_DEVICE_ID = 0x09,
    + RT5033_FUEL_REG_AVG_VOLT_H = 0x0A,
    + RT5033_FUEL_REG_AVG_VOLT_L = 0x0B,
    + RT5033_FUEL_REG_CONFIG_H = 0x0C,
    + RT5033_FUEL_REG_CONFIG_L = 0x0D,
    + /* Reserved 0x0E~0x0F */
    + RT5033_FUEL_REG_IRQ_CTRL = 0x10,
    + RT5033_FUEL_REG_IRQ_FLAG = 0x11,
    + RT5033_FUEL_VMIN = 0x12,
    + RT5033_FUEL_SMIN = 0x13,
    + /* Reserved 0x14~0x1F */
    + RT5033_FUEL_VGCOMP1 = 0x20,
    + RT5033_FUEL_VGCOMP2 = 0x21,
    + RT5033_FUEL_VGCOMP3 = 0x22,
    + RT5033_FUEL_VGCOMP4 = 0x23,
    + /* Reserved 0x24~0xFD */
    + RT5033_FUEL_MFA_H = 0xFE,
    + RT5033_FUEL_MFA_L = 0xFF,
    +
    + RT5033_FUEL_REG_END,
    +};
    +
    +/* RT5033 fuel gauge battery present property */
    +#define RT5033_FUEL_BAT_PRESENT 0x02
    +
    +/* RT5033 PMIC interrupts */
    +#define RT5033_PMIC_IRQ_BUCKOCP 2
    +#define RT5033_PMIC_IRQ_BUCKLV 3
    +#define RT5033_PMIC_IRQ_SAFELDOLV 4
    +#define RT5033_PMIC_IRQ_LDOLV 5
    +#define RT5033_PMIC_IRQ_OT 6
    +#define RT5033_PMIC_IRQ_VDDA_UV 7
    +
    +#endif /* __RT5033_PRIVATE_H__ */
    diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
    new file mode 100644
    index 0000000..010cff4
    --- /dev/null
    +++ b/include/linux/mfd/rt5033.h
    @@ -0,0 +1,62 @@
    +/*
    + * MFD core driver for the RT5033
    + *
    + * Copyright (C) 2014 Samsung Electronics
    + * Author: Beomho Seo <beomho.seo@samsung.com>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published bythe Free Software Foundation.
    + */
    +
    +#ifndef __RT5033_H__
    +#define __RT5033_H__
    +
    +#include <linux/regulator/consumer.h>
    +#include <linux/i2c.h>
    +#include <linux/regmap.h>
    +#include <linux/power_supply.h>
    +
    +/* RT5033 regulator IDs */
    +enum rt5033_regulators {
    + RT5033_BUCK = 0,
    + RT5033_LDO,
    + RT5033_SAFE_LDO,
    +
    + RT5033_REGULATOR_NUM,
    +};
    +
    +struct rt5033_dev {
    + struct device *dev;
    +
    + struct regmap *regmap;
    + struct regmap_irq_chip_data *irq_data;
    + int irq;
    + bool wakeup;
    +};
    +
    +struct rt5033_battery {
    + struct i2c_client *client;
    + struct rt5033_dev *rt5033;
    + struct regmap *regmap;
    + struct power_supply psy;
    +};
    +
    +/* RT5033 charger platform data */
    +struct rt5033_charger_data {
    + unsigned int pre_uamp;
    + unsigned int pre_uvolt;
    + unsigned int const_uvolt;
    + unsigned int eoc_uamp;
    + unsigned int fast_uamp;
    +};
    +
    +struct rt5033_charger {
    + struct device *dev;
    + struct rt5033_dev *rt5033;
    + struct power_supply psy;
    +
    + struct rt5033_charger_data *chg;
    +};
    +
    +#endif /* __RT5033_H__ */
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2014-12-09 13:41    [W:5.490 / U:0.124 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site