lkml.org 
[lkml]   [2014]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: using DMA-API on ARM
On 12/08/14 17:03, Catalin Marinas wrote:
> On Mon, Dec 08, 2014 at 03:01:32PM +0000, Arnd Bergmann wrote:
>> [ 0.000000] PL310 OF: cache setting yield illegal associativity
>> [ 0.000000] PL310 OF: -1069781724 calculated, only 8 and 16 legal
>> [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
>> [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
>> [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
>> [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
>> [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e130001
>
> If the above value is correct, they should make sure bit 22 is set in
> AUX_CTRL.

Hante applied the patch and it now says:

[ 0.000000] PL310 OF: cache setting yield illegal associativity
[ 0.000000] PL310 OF: -1069781724 calculated, only 8 and 16 legal
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001

He started running a test overnight. So will see if it hits the failure
with this L2 cache configuration.

Regards,
Arend


\
 
 \ /
  Last update: 2014-12-08 18:21    [W:0.121 / U:1.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site