lkml.org 
[lkml]   [2014]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] ARM: sti: Provide DT nodes for SBC SSC[0..2]
Date
The Synchronous Serial Controller is used to provide SPI.

These are the ports which are located on the Stand-By Controller (SBC).

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 90bc090..80e2407 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -329,5 +329,36 @@

status = "disabled";
};
+
+ /* SBC SSC */
+ spi@9540000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9541000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9542000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9542000 0x110>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
};
};
--
1.9.1


\
 
 \ /
  Last update: 2014-12-08 14:21    [W:0.042 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site