lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] pinctrl: Broadcom Cygnus pinctrl device tree binding


On 12/4/2014 2:16 PM, Belisko Marek wrote:
> On Thu, Dec 4, 2014 at 10:56 PM, Ray Jui <rjui@broadcom.com> wrote:
>> Device tree binding documentation for Broadcom Cygnus pinctrl driver
>>
>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>> ---
>> .../bindings/pinctrl/brcm,cygnus-pinctrl.txt | 92 ++++++++++++++++++++
>> 1 file changed, 92 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinctrl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinctrl.txt
>> new file mode 100644
>> index 0000000..86e4579
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinctrl.txt
>> @@ -0,0 +1,92 @@
>> +Broadcom Cygnus Pin Controller
>> +
>> +The Cygnus pin controller supports setting the alternate functions of groups
>> +of pins. Pinmux configuration on individual pins is not supported by the
>> +Cygnus A0 SoC.
>> +
>> +Required properties:
>> +
>> +- compatible:
>> + Must be "brcm,cygnus-pinctrl"
>> +
>> +- reg:
>> + Define the base and range of the I/O address space that contain the Cygnus
>> +pin control registers
>> +
>> +- brcm,groups:
>> + This can be strings of one or more group names. This defines the group(s)
>> +that one wants to configure
>> +
>> +- brcm,function:
>> + This is the alternate function that one wants to configure to. Valid
>> +alternate functions are "alt1", "alt2", "alt3", "alt4"
>> +
>> +Each child node represents a configuration. Client devices reference the the
>> +child node to enable the mux configuration.
>> +
>> +For example:
>> +
>> + pinctrl: pinctrl@0x0301d0c8 {
>> + compatible = "brcm,cygnus-pinctrl";
>> + reg = <0x0301d0c8 0x2c>;
>> +
>> + i2s_0: i2s_0 {
>> + brcm,groups = "smart_card0", "smart_card0_fcb";
>> + brcm,function = "alt2";
>> + };
>> +
>> + i2s_1: i2s_1 {
>> + brcm,groups = "smart_card1", "smart_card1_fcb";
>> + brcm,function = "alt2";
>> + };
>> +
>> + spi_0: spi_0 {
>> + brcm,groups = "spi0";
>> + brcm,function = "alt1";
>> + };
>> + }
>> +
>> + spi0@18028000 {
>> + compatible = "arm,pl022", "arm,primecell";
>> + reg = <0x18028000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-0 = <&spi_0>;
>> + clocks = <&axi81_clk>;
>> + clock-names = "apb_pclk";
>> + };
>> +
>> +Consider the following snapshot of Cygnus pinmux table:
>> +
>> +number pin group alt1 alt2 alt3 alt4
>> +------ --- ---- ---- ---- ---- ----
>> +42 sc0_clk smart_card0 SMART CARD0 I2S_0 N/A chip_gpio24
>> +43 sc0_cmdvcc_l smart_card0 SMART CARD0 I2S_0 N/A STRAP
>> +44 sc0_detect smart_card0 SMART CARD0 I2S_0 N/A chip_gpio25
>> +45 sc0_fcb smart_card0_fcb SMART CARD0_FCB I2S_0 N/A chip_gpio26
>> +46 sc0_io smart_card0 SMART CARD0 I2S_0 N/A chip_gpio27
>> +47 sc0_rst_l smart_card0 SMART CARD0 SPDIF N/A STRAP
>> +
>> +Note due to limitation of the Cygnus hardware, pinmux configuration can only
>> +be group based. To enable I2S_0 function, one needs the following child node
>> +configuration:
>> +
>> + i2s_0: i2s_0 {
>> + brcm,groups = "smart_card0", "smart_card0_fcb";
>> + brcm,function = "alt2";
>> + };
>> +
>> +This tells the Cygnus pin controller to configure groups "smart_card0" and
>> +"smart_card0_fcb" to I2S_0. With this configuration, pins 42, 43, 44, 45, 46
>> +become I2C_0, and pin 47 becomes SPDIF
> ^^^^ typo - should be I2S_0
Oh yeah. Will change from I2C_0 to I2S_0. Thanks.
>> +
>> +Consider another example, that one wants to configure the above pins as GPIO:
>> +
>> + gpio_24_27: gpio_24_27 {
>> + brcm,groups = "smart_card0", "smart_card0_fcb";
>> + brcm,function = "alt4";
>> + };
>> +
>> +With the above configuration, pins 42, 44, 45, 46 become GPIO, and 43 and 47
>> +become reserved for STRAP
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> BR,
>
> marek
>


\
 
 \ /
  Last update: 2014-12-05 00:01    [W:0.047 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site