lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
Date
On Thursday, December 04, 2014 06:47:01 AM Alexander Usyskin wrote:
>
> --001a1132ed64aaf31305095ca68b
> Content-Type: text/plain; charset=UTF-8
>
> On Dec 4, 2014 2:37 AM, "Rafael J. Wysocki" <rjw@rjwysocki.net> wrote:
> >
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
> > selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
> > depending on CONFIG_PM_RUNTIME may now be changed to depend on
> > CONFIG_PM.
> >
> > Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
> > drivers/misc/.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >
> > Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
> > PM_SLEEP is selected) which is only in linux-next at the moment (via the
> > linux-pm tree).
> >
> > Please let me know if it is OK to take this one into linux-pm.
> >
> > ---
> > drivers/misc/apds990x.c | 4 ++--
> > drivers/misc/bh1770glc.c | 2 +-
> > drivers/misc/lis3lv02d/lis3lv02d_i2c.c | 4 ++--
> > drivers/misc/mei/mei_dev.h | 4 ++--
> > drivers/misc/mei/pci-me.c | 8 ++++----
> > drivers/misc/mei/pci-txe.c | 8 +++-----
> > 6 files changed, 14 insertions(+), 16 deletions(-)
> >
> > Index: linux-pm/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > ===================================================================
> > --- linux-pm.orig/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > +++ linux-pm/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
> > @@ -235,7 +235,7 @@ static int lis3lv02d_i2c_resume(struct d
> > }
> > #endif /* CONFIG_PM_SLEEP */
> >
> > -#ifdef CONFIG_PM_RUNTIME
> > +#ifdef CONFIG_PM
> > static int lis3_i2c_runtime_suspend(struct device *dev)
> > {
> > struct i2c_client *client = container_of(dev, struct i2c_client,
> dev);
> > @@ -253,7 +253,7 @@ static int lis3_i2c_runtime_resume(struc
> > lis3lv02d_poweron(lis3);
> > return 0;
> > }
> > -#endif /* CONFIG_PM_RUNTIME */
> > +#endif /* CONFIG_PM */
> >
> > static const struct i2c_device_id lis3lv02d_id[] = {
> > {"lis3lv02d", LIS3LV02D},
> > Index: linux-pm/drivers/misc/mei/mei_dev.h
> > ===================================================================
> > --- linux-pm.orig/drivers/misc/mei/mei_dev.h
> > +++ linux-pm/drivers/misc/mei/mei_dev.h
> > @@ -530,9 +530,9 @@ struct mei_device {
> > * Power Gating support
> > */
> > enum mei_pg_event pg_event;
> > -#ifdef CONFIG_PM_RUNTIME
> > +#ifdef CONFIG_PM
> > struct dev_pm_domain pg_domain;
> > -#endif /* CONFIG_PM_RUNTIME */
> > +#endif /* CONFIG_PM */
> >
> > unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE];
> > u32 rd_msg_hdr;
> > Index: linux-pm/drivers/misc/mei/pci-me.c
> > ===================================================================
> > --- linux-pm.orig/drivers/misc/mei/pci-me.c
> > +++ linux-pm/drivers/misc/mei/pci-me.c
> > @@ -89,13 +89,13 @@ static const struct pci_device_id mei_me
> >
> > MODULE_DEVICE_TABLE(pci, mei_me_pci_tbl);
> >
> > -#ifdef CONFIG_PM_RUNTIME
> > +#ifdef CONFIG_PM
> > static inline void mei_me_set_pm_domain(struct mei_device *dev);
> > static inline void mei_me_unset_pm_domain(struct mei_device *dev);
> > #else
> > static inline void mei_me_set_pm_domain(struct mei_device *dev) {}
> > static inline void mei_me_unset_pm_domain(struct mei_device *dev) {}
> > -#endif /* CONFIG_PM_RUNTIME */
> > +#endif /* CONFIG_PM */
> >
> > /**
> > * mei_me_quirk_probe - probe for devices that doesn't valid ME interface
> > @@ -357,7 +357,7 @@ static int mei_me_pci_resume(struct devi
> > }
> > #endif /* CONFIG_PM_SLEEP */
> >
> > -#ifdef CONFIG_PM_RUNTIME
> > +#ifdef CONFIG_PM
> > static int mei_me_pm_runtime_idle(struct device *device)
> > {
> > struct pci_dev *pdev = to_pci_dev(device);
> > @@ -453,7 +453,7 @@ static inline void mei_me_unset_pm_domai
> > /* stop using pm callbacks if any */
> > dev->dev->pm_domain = NULL;
> > }
> > -#endif /* CONFIG_PM_RUNTIME */
> > +#endif /* CONFIG_PM */
> >
>
> Here we can simply drop both endif and ifdef

Right, thanks for spotting that!

Rafael



\
 
 \ /
  Last update: 2014-12-04 23:21    [W:0.038 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site