lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
On 11:05-20141204, Guenter Roeck wrote:
> On Thu, Dec 04, 2014 at 10:58:47AM -0600, Nishanth Menon wrote:
> > Certain I2C based GPIO expanders could be used in sleepable context,
> > this results in:
> > [ 115.890569] ------------[ cut here ]------------
> > [ 115.895422] WARNING: CPU: 0 PID: 1115 at drivers/gpio/gpiolib.c:1370 gpiod_set_raw_value+0x40/0x4c()
> > [ 115.905024] Modules linked in:
> > [ 115.908229] CPU: 0 PID: 1115 Comm: sh Tainted: G W 3.18.0-rc7-next-20141203-dirty #1
> > [ 115.917461] Hardware name: Generic DRA74X (Flattened Device Tree)
> > [ 115.923876] [<c0015368>] (unwind_backtrace) from [<c00119f4>] (show_stack+0x10/0x14)
> > [ 115.932013] [<c00119f4>] (show_stack) from [<c05b78e8>] (dump_stack+0x78/0x94)
> > [ 115.939594] [<c05b78e8>] (dump_stack) from [<c003de28>] (warn_slowpath_common+0x7c/0xb4)
> > [ 115.948094] [<c003de28>] (warn_slowpath_common) from [<c003de7c>] (warn_slowpath_null+0x1c/0x24)
> > [ 115.957315] [<c003de7c>] (warn_slowpath_null) from [<c03461e8>] (gpiod_set_raw_value+0x40/0x4c)
> > [ 115.966457] [<c03461e8>] (gpiod_set_raw_value) from [<c04866f4>] (set_fan_speed+0x4c/0x64)
> > [ 115.975145] [<c04866f4>] (set_fan_speed) from [<c04868a8>] (set_rpm+0x98/0xac)
> > [ 115.982742] [<c04868a8>] (set_rpm) from [<c039fb4c>] (dev_attr_store+0x18/0x24)
> > [ 115.990426] [<c039fb4c>] (dev_attr_store) from [<c01b0a28>] (sysfs_kf_write+0x4c/0x50)
> > [ 115.998742] [<c01b0a28>] (sysfs_kf_write) from [<c01afe1c>] (kernfs_fop_write+0xbc/0x19c)
> > [ 116.007333] [<c01afe1c>] (kernfs_fop_write) from [<c0148cc4>] (vfs_write+0xb0/0x1a0)
> > [ 116.015461] [<c0148cc4>] (vfs_write) from [<c0148fbc>] (SyS_write+0x44/0x84)
> > [ 116.022881] [<c0148fbc>] (SyS_write) from [<c000e5c0>] (ret_fast_syscall+0x0/0x48)
> > [ 116.030833] ---[ end trace 3a0b636123acab82 ]---
> >
> > So, switch over to sleepable GPIO operations as there is no mandatory
> > need for non-sleepable gpio operations in the fan driver.
> >
> > This allows the fan driver to be used with i2c based gpio expanders such
> > as palmas_gpio.
> >
> > Signed-off-by: Nishanth Menon <nm@ti.com>
>
> Applied to hwmon-next. Do we need this in older kernels ?

I have'nt had a need for it till recently.. in terms of the sleepable
get/set, it seems to have been introduced with
commit 7560fa60fcdcdb0da662f6a9fad9064b554ef46c
Author: David Brownell <david-b@pacbell.net>
Date: Tue Mar 4 14:28:27 2008 -0800
gpio: <linux/gpio.h> and "no GPIO support here" stubs

Guessing no one needed it so far.. so probably future should be good
enough, I think..

--
Regards,
Nishanth Menon


\
 
 \ /
  Last update: 2014-12-04 21:21    [W:0.036 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site