lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [Xen-devel] [PATCH v5 9/9] xen/pciback: Implement PCI reset slot or bus with 'do_flr' SysFS attribute
On 04/12/14 12:06, Konrad Rzeszutek Wilk wrote:
>
> On Dec 4, 2014 6:30 AM, David Vrabel <david.vrabel@citrix.com> wrote:
>>
>> On 03/12/14 21:40, Konrad Rzeszutek Wilk wrote:
>>>
>>> Instead of doing all this complex dance, we depend on the toolstack
>>> doing the right thing. As such implement the 'do_flr' SysFS attribute
>>> which 'xl' uses when a device is detached or attached from/to a guest.
>>> It bypasses the need to worry about the PCI lock.
>>
>> No. Get pciback to add its own "reset" sysfs file (as I have repeatedly
>> proposed).
>>
>
> Which does not work as the kobj will complain (as there is already an 'reset' associated with the PCI device).

It is only needed if the core won't provide one.

+static int pcistub_try_create_reset_file(struct pci_dev *pci)
+{
+ struct xen_pcibk_dev_data *dev_data = pci_get_drvdata(pci);
+ struct device *dev = &pci->dev;
+ int ret;
+
+ /* Already have a per-function reset? */
+ if (pci_probe_reset_function(pci) == 0)
+ return 0;
+
+ ret = device_create_file(dev, &dev_attr_reset);
+ if (ret < 0)
+ return ret;
+ dev_data->created_reset_file = true;
+ return 0;
+}

David


From e65a814106bc9994ec47b5317f7cdc975270d27f Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@citrix.com>
Date: Thu, 10 Jul 2014 13:09:25 +0100
Subject: [PATCH 2/2] xen-pciback: provide a "reset" sysfs file to try harder
at an SBR

The standard implementation of pci_reset_function() does not try an
SBR if there are other sibling devices. This is a common
configuration for multi-function devices (e.g., GPUs with a HDMI audio
device function).

If all the functions are co-assigned to the same domain at the same
time, then it is safe to perform an SBR to reset all functions at the
same time.

Add a "reset" sysfs file with the same interface as the standard one
(i.e., write 1 to reset) that will try an SBR if all sibling devices
are unbound or bound to pciback.

Note that this is weaker than the requirement for functions to be
simultaneously co-assigned, but the toolstack is expected to ensure
this.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 4e8ba38..d6c29aa 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -14,6 +14,7 @@
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/atomic.h>
+#include <linux/delay.h>
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypervisor.h>
@@ -60,6 +61,114 @@ static LIST_HEAD(pcistub_devices);
static int initialize_devices;
static LIST_HEAD(seized_devices);

+/*
+ * pci_reset_function() will only work if there is a mechanism to
+ * reset that single function (e.g., FLR or a D-state transition).
+ * For PCI hardware that has two or more functions but no per-function
+ * reset, we can do a bus reset iff all the functions are co-assigned
+ * to the same domain.
+ *
+ * If a function has no per-function reset mechanism the 'reset' sysfs
+ * file that the toolstack uses to reset a function prior to assigning
+ * the device will be missing. In this case, pciback adds its own
+ * which will try a bus reset.
+ *
+ * Note: pciback does not check for co-assigment before doing a bus
+ * reset, only that the devices are bound to pciback. The toolstack
+ * is assumed to have done the right thing.
+ */
+static int __pcistub_reset_function(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 ctrl;
+ int ret;
+
+ ret = __pci_reset_function_locked(dev);
+ if (ret == 0)
+ return 0;
+
+ if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
+ return -ENOTTY;
+
+ list_for_each_entry(pdev, &dev->bus->devices, bus_list) {
+ if (pdev != dev && (!pdev->driver
+ || strcmp(pdev->driver->name, "pciback")))
+ return -ENOTTY;
+ pci_save_state(pdev);
+ }
+
+ pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(200);
+
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(200);
+
+ list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+ pci_restore_state(pdev);
+
+ return 0;
+}
+
+static int pcistub_reset_function(struct pci_dev *dev)
+{
+ int ret;
+
+ device_lock(&dev->dev);
+ ret = __pcistub_reset_function(dev);
+ device_unlock(&dev->dev);
+
+ return ret;
+}
+
+static ssize_t pcistub_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned long val;
+ ssize_t result = strict_strtoul(buf, 0, &val);
+
+ if (result < 0)
+ return result;
+
+ if (val != 1)
+ return -EINVAL;
+
+ result = pcistub_reset_function(pdev);
+ if (result < 0)
+ return result;
+ return count;
+}
+static DEVICE_ATTR(reset, 0200, NULL, pcistub_reset_store);
+
+static int pcistub_try_create_reset_file(struct pci_dev *pci)
+{
+ struct xen_pcibk_dev_data *dev_data = pci_get_drvdata(pci);
+ struct device *dev = &pci->dev;
+ int ret;
+
+ /* Already have a per-function reset? */
+ if (pci_probe_reset_function(pci) == 0)
+ return 0;
+
+ ret = device_create_file(dev, &dev_attr_reset);
+ if (ret < 0)
+ return ret;
+ dev_data->created_reset_file = true;
+ return 0;
+}
+
+static void pcistub_remove_reset_file(struct pci_dev *pci)
+{
+ struct xen_pcibk_dev_data *dev_data = pci_get_drvdata(pci);
+
+ if (dev_data && dev_data->created_reset_file)
+ device_remove_file(&pci->dev, &dev_attr_reset);
+}
+
static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
{
struct pcistub_device *psdev;
@@ -100,7 +209,8 @@ static void pcistub_device_release(struct kref *kref)
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
- __pci_reset_function_locked(dev);
+ __pcistub_reset_function(psdev->dev);
+
if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
dev_dbg(&dev->dev, "Could not reload PCI state\n");
else
@@ -268,7 +378,7 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
/* This is OK - we are running from workqueue context
* and want to inhibit the user from fiddling with 'reset'
*/
- pci_reset_function(dev);
+ pcistub_reset_function(dev);
pci_restore_state(psdev->dev);

/* This disables the device. */
@@ -392,7 +502,7 @@ static int pcistub_init_device(struct pci_dev *dev)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
else {
dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
- __pci_reset_function_locked(dev);
+ __pcistub_reset_function(dev);
pci_restore_state(dev);
}
/* Now disable the device (this also ensures some private device
@@ -401,6 +511,10 @@ static int pcistub_init_device(struct pci_dev *dev)
dev_dbg(&dev->dev, "reset device\n");
xen_pcibk_reset_device(dev);

+ err = pcistub_try_create_reset_file(dev);
+ if (err < 0)
+ goto config_release;
+
dev->dev_flags |= PCI_DEV_FLAGS_ASSIGNED;
return 0;

@@ -526,6 +640,8 @@ static void pcistub_remove(struct pci_dev *dev)

dev_dbg(&dev->dev, "removing\n");

+ pcistub_remove_reset_file(dev);
+
spin_lock_irqsave(&pcistub_devices_lock, flags);

xen_pcibk_config_quirk_release(dev);
diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h
index f72af87..708ade9 100644
--- a/drivers/xen/xen-pciback/pciback.h
+++ b/drivers/xen/xen-pciback/pciback.h
@@ -42,6 +42,7 @@ struct xen_pcibk_device {
struct xen_pcibk_dev_data {
struct list_head config_fields;
struct pci_saved_state *pci_saved_state;
+ bool created_reset_file;
unsigned int permissive:1;
unsigned int warned_on_write:1;
unsigned int enable_intx:1;
\
 
 \ /
  Last update: 2014-12-04 14:01    [W:0.222 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site