lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] ARM: dts: exynos5420: Add clock for audss pinctrl (fixing GPIO setup failure)
Date
The pinctrl for audio subsystem needs 'mau_epll' clock to be enabled in
order to properly access memory during GPIO setup.

After introducing runtime PM to pl330 DMA driver the 'mau_epll' was
gated, because the "amba" clock was disabled and there were no more
users of mau_epll.

This lead to system hang just before probing i2s0 because
samsung_pinmux_setup() tried to access memory from audss block which was
gated.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index ba686e40eac7..c0ca0da36ade 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -696,6 +696,9 @@
};

pinctrl@03860000 {
+ clocks = <&clock CLK_MAU_EPLL>;
+ clock-names = "block";
+
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
--
1.9.1


\
 
 \ /
  Last update: 2014-12-04 12:21    [W:0.084 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site