lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/3] devicetree: of: Add bindings for chosen node, stdout-path
Date
On Wed, 03 Dec 2014 15:07:49 -0800
, Frank Rowand <frowand.list@gmail.com>
wrote:
> On 12/3/2014 1:45 PM, Grant Likely wrote:
> > On Wed, Dec 3, 2014 at 7:46 PM, Frank Rowand <frowand.list@gmail.com> wrote:
> >> On 12/3/2014 7:12 AM, Grant Likely wrote:
> >>> On Wed, Dec 3, 2014 at 2:24 AM, Frank Rowand <frowand.list@gmail.com> wrote:
> >>>> On 11/27/2014 9:56 AM, Leif Lindholm wrote:
> >>>>> Add a global binding for the chosen node.
> >>>>> Include a description of the stdout-path, and an explicit statement on
> >>>>> its extra options in the context of a UART console.
> >>>>>
> >>>>> Opening description stolen from www.devicetree.org, and part of the
> >>>>> remaining text provided by Mark Rutland.
> >>>>>
> >>>>> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> >>>>> ---
> >>>>> Documentation/devicetree/bindings/chosen.txt | 42 ++++++++++++++++++++++++++
> >>>>> 1 file changed, 42 insertions(+)
> >>>>> create mode 100644 Documentation/devicetree/bindings/chosen.txt
> >>>>>
> >>>>> diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
> >>>>> new file mode 100644
> >>>>> index 0000000..9cd74e9
> >>>>> --- /dev/null
> >>>>> +++ b/Documentation/devicetree/bindings/chosen.txt
> >>>>> @@ -0,0 +1,42 @@
> >>>>> +The chosen node
> >>>>> +---------------
> >>>>> +
> >>>>> +The chosen node does not represent a real device, but serves as a place
> >>>>> +for passing data between firmware and the operating system, like boot
> >>>>> +arguments. Data in the chosen node does not represent the hardware.
> >>>>> +
> >>>>> +
> >>>>> +stdout-path property
> >>>>
> >>>> The code in patch 3/3 adds the extra options feature to the properties:
> >>>>
> >>>> stdout-path
> >>>> linux,stdout-path
> >>>> stdout [if (IS_ENABLED(CONFIG_PPC) ... ]
> >>>
> >>> I don't understand what you mean here. Are you suggesting a change to
> >>> this patch? Is there something deficient in it?
> >>
> >> Assuming that the code change in patch 3 is as desired, then the chosen.txt
> >> documentation applies to all three properties, not just stdout-path. So
> >> yes, a change is suggested for the documentation.
> >
> > how about if this is added:
> >
> > Implementation note: Linux will look for the property "linux,stdout-path" or
> > on PowerPC "stdout" if "stdout-path" is not found. However, the
> > "linux,stdout-path" and "stdout" properties are deprecated. New platforms
> > should only use the "stdout-path" property.
> >
> > g.
> >
>
> Yep, perfect.

Great, thanks. Merged.

g.


\
 
 \ /
  Last update: 2014-12-04 12:21    [W:0.070 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site