lkml.org 
[lkml]   [2014]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectARM: dts: sun9i: Allwinner A80 dtsi - missing clock-frequency property
When booting Linux 3.19-rc2 on a Merrii Optimusboard using 
arch/arm/boot/dts/sun9i-a80-optimus.dts adn
arch/arm/boot/dts/sun9i-a80.dtsi I get errors
[ 0.061192] /cpus/cpu@0 missing clock-frequency property
[ 0.061209] /cpus/cpu@1 missing clock-frequency property
[ 0.061223] /cpus/cpu@2 missing clock-frequency property
[ 0.061237] /cpus/cpu@3 missing clock-frequency property
[ 0.061251] /cpus/cpu@100 missing clock-frequency property
[ 0.061266] /cpus/cpu@101 missing clock-frequency property
[ 0.061283] /cpus/cpu@102 missing clock-frequency property
[ 0.061300] /cpus/cpu@103 missing clock-frequency property

The dtsi was provided by patch
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4ab328f06e305bf3ea254f4e3c94bb4d820998c1

According to file pack/chips/sun9iw1p1/optimus/sys_config.fex supplied
in the OptimusBoard SDK the big cluster can run at up to 1800 MHz, and
the LITTLE cluster can run at up to 1200 MHz,depending on the CPU voltage:

big
1.08V (1608Mhz, 1800Mhz]
1.00V (1536Mhz, 1608Mhz]
0.96V (1440Mhz, 1536Mhz]
0.90V (1296Mhz, 1440Mhz]
0.84V ( 0Mhz, 1296Mhz]

LITTLE
1.02V (1128Mhz, 1200Mhz]
0.96V (1008Mhz, 1128Mhz]
0.90V ( 864Mhz, 1008Mhz]
0.84V ( 0Mhz, 864Mhz]

I guess the proper way to specify the data is the one described in
Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

Other boards might run at other frequencies. Hence we might want to put
this information into the board file
arch/arm/boot/dts/sun9i-a80-optimus.dts.

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt,
arch/arm/boot/dts/exynos5260.dtsi, and
arch/arm/boot/dts/exynos5420.dtsi, all assume that
cpu@0-cpu@3 are A15 (big) and cpu@101-cpu@103 are A7 (LITTLE).

Shouldn't arch/arm/boot/dts/sun9i-a80.dtsi stick to this convention?

The scripts to create the uImage and to reproduce the problem are in
https://github.com/xypron/kernel-optimusboard/tree/35d06c020f6584b5023e0e4bef67cc5a625f65bb

Best regards

Heinrich Schuchardt




\
 
 \ /
  Last update: 2014-12-31 02:01    [W:0.116 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site