lkml.org 
[lkml]   [2014]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Revert "[SCSI] mpt2sas: Remove phys on topology change."
On 12/02/2014 04:28 PM, Sreekanth Reddy wrote:
> This reverts commit 3520f9c779bed098ca76dd3fb6377264301d57ed
> ("mpt2sas: Remove phys on topology change")
>
> Reverting the previous mpt2sas drives patch changes,
> since we will observe below issue
>
> Issue:
> Drives connected Enclosure/Expander will unregister with
> SCSI Transport Layer, if any one remove and add expander
> cable with in DMD (Device Missing Delay) time period or
> even any one power-off and power-on the Enclosure with in
> the DMD period.

We were not able to reproduce the issue which the original patch
should have fixed, so it's fine to remove it.

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

> Cc: <stable@vger.kernel.org>
> Cc: Tomas Henzl <thenzl@redhat.com>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
> ---
> drivers/scsi/mpt2sas/mpt2sas_transport.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
> index 0d1d064..e689bf2 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
> +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
> @@ -1006,12 +1006,9 @@ mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
> &mpt2sas_phy->remote_identify);
> _transport_add_phy_to_an_existing_port(ioc, sas_node,
> mpt2sas_phy, mpt2sas_phy->remote_identify.sas_address);
> - } else {
> + } else
> memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
> sas_identify));
> - _transport_del_phy_from_an_existing_port(ioc, sas_node,
> - mpt2sas_phy);
> - }
>
> if (mpt2sas_phy->phy)
> mpt2sas_phy->phy->negotiated_linkrate =



\
 
 \ /
  Last update: 2014-12-03 14:01    [W:0.127 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site