lkml.org 
[lkml]   [2014]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH v4 0/1] add support for Seagate BlackArmor NAS220
v4:	rename basename to blackarmor-nas220
use "Seagate Blackarmor NAS220" as model name
use node references instead of repeating the bus structure
separate nodes with blank lines
adt7476's node name reflects device function (i.e. thermal)
reduce button labels to "Reset" and "Power"
use GPIO_ACTIVE_LOW for regulator's gpio property

v3: documented UART pinout in dts

v2: indent with tabs only
removed NAND layout

Evgeni Dobrev (1):
add support for Seagate BlackArmor NAS220

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 172 ++++++++++++++++++++++
2 files changed, 173 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts

--
1.7.10.4



\
 
 \ /
  Last update: 2014-12-28 12:01    [W:0.219 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site