lkml.org 
[lkml]   [2014]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] mtd: nand: atmel: Update DT documentation after splitting NFC and NAND
Hi, Boris

Thanks for the patch.

You need to rebase on the top of current mtd-l2 git tree. As I had some
change on the binding document.

Best Regards,
Josh Wu

On 12/5/2014 6:30 AM, Boris Brezillon wrote:
> The NAND and NFC (NAND Flash Controller) were linked together with a
> parent <-> child relationship.
>
> This model has several drawbacks:
> - it does not allow for multiple NAND chip handling while the controller
> support multi-chip (even though the driver is not ready yet)
> - it mixes NAND partitions and NFC nodes at the same level (which is a bit
> disturbing)
> - the introduction of the EBI bus implies defining NAND chips under the
> EBI node, and the ranges available under the EBI node should be
> restricted to EBI address space, while the NFC references several
> registers outside of these EBI ranges.
>
> Move the NFC node outside of the NAND node, to get a more future-proof
> model.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> .../devicetree/bindings/mtd/atmel-nand.txt | 46 ++++++++++++----------
> 1 file changed, 26 insertions(+), 20 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> index 6edc3b6..8896850 100644
> --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> @@ -30,15 +30,19 @@ Optional properties:
> sector size 1024.
> - nand-bus-width : 8 or 16 bus width if not present 8
> - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
> -- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
> - - Required properties:
> - - compatible : "atmel,sama5d3-nfc".
> - - reg : should specify the address and size used for NFC command registers,
> - NFC registers and NFC Sram. NFC Sram address and size can be absent
> - if don't want to use it.
> - - clocks: phandle to the peripheral clock
> - - Optional properties:
> - - atmel,write-by-sram: boolean to enable NFC write by sram.
> +- atmel,nfc: phandle referencing the NAND Flash Controller, if available.
> +
> +The NAND Flash Controller (NFC) is an advanced NAND controller and should be
> +used in conjunction with the NAND flash device.
> +Required properties:
> + - compatible : "atmel,sama5d3-nfc".
> + - reg : should specify the address and size used for NFC command registers,
> + NFC registers and NFC Sram. NFC Sram address and size can be absent
> + if you don't want to use it.
> + - clocks: phandle to the peripheral clock
> +
> +Optional properties:
> + - atmel,write-by-sram: boolean to enable NFC write by sram.
>
> Examples:
> nand0: nand@40000000,0 {
> @@ -89,21 +93,23 @@ nand0: nand@40000000 {
> };
>
> /* for NFC supported chips */
> +nfc: nfc@70000000 {
> + compatible = "atmel,sama5d3-nfc";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&hsmc_clk>
> + reg = <
> + 0x70000000 0x10000000 /* NFC Command Registers */
> + 0xffffc000 0x00000070 /* NFC HSMC regs */
> + 0x00200000 0x00100000 /* NFC SRAM banks */
> + >;
> +};
> +
> nand0: nand@40000000 {
> compatible = "atmel,at91rm9200-nand";
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
> + atmel,nfc = <&nfc>;
> ...
> - nfc@70000000 {
> - compatible = "atmel,sama5d3-nfc";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - clocks = <&hsmc_clk>
> - reg = <
> - 0x70000000 0x10000000 /* NFC Command Registers */
> - 0xffffc000 0x00000070 /* NFC HSMC regs */
> - 0x00200000 0x00100000 /* NFC SRAM banks */
> - >;
> - };
> };



\
 
 \ /
  Last update: 2014-12-26 11:01    [W:0.109 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site