lkml.org 
[lkml]   [2014]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] ARM: dts: berlin: correct BG2Q's SM GPIO location.
Date
The gpio4 and gpio5 are in 0xf7fc0000 apb which is located in the SM domain.
This patch moves gpio4 and gpio5 to the correct location. This patch also
renames them as the following to match the names we internally used in
marvell:
gpio4 -> sm_gpio1
gpio5 -> sm_gpio0
porte -> portf
portf -> porte

This also matches what we did for BG2 and BG2CD's SM GPIO.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 60 ++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 41a683f..f0ddbec 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -356,36 +356,6 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
-
- gpio4: gpio@5000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0x5000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- porte: gpio-port@4 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
-
- gpio5: gpio@c000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xc000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- portf: gpio-port@5 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
};

chip: chip-control@ea0000 {
@@ -474,6 +444,21 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;

+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
i2c2: i2c@7000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
@@ -524,6 +509,21 @@
status = "disabled";
};

+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
sysctrl: pin-controller@d000 {
compatible = "marvell,berlin2q-system-ctrl";
reg = <0xd000 0x100>;
--
2.1.4


\
 
 \ /
  Last update: 2014-12-26 10:41    [W:2.612 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site