lkml.org 
[lkml]   [2014]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] media: i2c/adp1653: devicetree support for adp1653
Em Wed, 3 Dec 2014 22:46:41 +0100
Pavel Machek <pavel@ucw.cz> escreveu:

>
> We are moving to device tree support on OMAP3, but that currently
> breaks ADP1653 driver. This adds device tree support, plus required
> documentation.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>

Please be sure to check your patch with checkpatch. There are several
issues on it:

WARNING: DT compatible string "adi,adp1653" appears un-documented -- check ./Documentation/devicetree/bindings/
#78: FILE: arch/arm/boot/dts/omap3-n900.dts:572:
+ compatible = "adi,adp1653";

ERROR: trailing whitespace
#136: FILE: drivers/media/i2c/adp1653.c:332:
+^I^I^I$

ERROR: trailing whitespace
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, $

WARNING: line over 80 characters
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash,

ERROR: trailing statements should be on next line
#177: FILE: drivers/media/i2c/adp1653.c:454:
+ if (!child) return -EINVAL;

WARNING: line over 80 characters
#178: FILE: drivers/media/i2c/adp1653.c:455:
+ if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#178: FILE: drivers/media/i2c/adp1653.c:455:
+ if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;

WARNING: line over 80 characters
#180: FILE: drivers/media/i2c/adp1653.c:457:
+ if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#180: FILE: drivers/media/i2c/adp1653.c:457:
+ if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#182: FILE: drivers/media/i2c/adp1653.c:459:
+ if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#186: FILE: drivers/media/i2c/adp1653.c:463:
+ if (!child) return -EINVAL;

ERROR: trailing statements should be on next line
#187: FILE: drivers/media/i2c/adp1653.c:464:
+ if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;

ERROR: trailing whitespace
#197: FILE: drivers/media/i2c/adp1653.c:474:
+^I^Idev_err(&client->dev, "Error getting GPIO\n"); $

total: 9 errors, 4 warnings, 199 lines checked

NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile

>
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
> @@ -0,0 +1,38 @@
> +* Analog Devices ADP1653 flash LED driver
> +
> +Required Properties:
> +
> + - compatible: Must contain one of the following
> + - "adi,adp1653"
> +
> + - reg: I2C slave address
> +
> + - gpios: References to the GPIO that controls the power for the chip.
> +
> +There are two led outputs available - flash and indicator. One led is
> +represented by one child node, nodes need to be named "flash" and "indicator".
> +
> +Required properties of the LED child node:
> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Required properties of the flash LED child node:
> +
> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example:
> +
> + adp1653: led-controller@30 {
> + compatible = "adi,adp1653";
> + reg = <0x30>;
> + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
> +
> + flash {
> + flash-timeout-microsec = <500000>;
> + flash-max-microamp = <320000>;
> + max-microamp = <50000>;
> + };
> + indicator {
> + max-microamp = <17500>;
> + };
> + };
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index cfddc3d..11d8afd 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -560,6 +567,22 @@
>
> ti,usb-charger-detection = <&isp1704>;
> };
> +
> + adp1653: led-controller@30 {
> + compatible = "adi,adp1653";
> + reg = <0x30>;
> + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
> +
> + flash {
> + flash-timeout-microsec = <500000>;
> + flash-max-microamp = <320000>;
> + max-microamp = <50000>;
> + };
> +
> + indicator {
> + max-microamp = <17500>;
> + };
> + };
> };
>
> &i2c3 {
> diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c
> index 873fe19..62601b2 100644
> --- a/drivers/media/i2c/adp1653.c
> +++ b/drivers/media/i2c/adp1653.c
> @@ -8,6 +8,7 @@
> * Contributors:
> * Sakari Ailus <sakari.ailus@iki.fi>
> * Tuukka Toivonen <tuukkat76@gmail.com>
> + * Pavel Machek <pavel@ucw.cz>
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License
> @@ -34,9 +35,11 @@
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/of_gpio.h>
> +#include <linux/gpio.h>
> #include <media/adp1653.h>
> #include <media/v4l2-device.h>
>
> #define TIMEOUT_MAX 820000
> #define TIMEOUT_STEP 54600
> #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
> @@ -306,9 +318,18 @@ adp1653_init_device(struct adp1653_flash *flash)
> static int
> __adp1653_set_power(struct adp1653_flash *flash, int on)
> {
> - int ret;
> + int ret = 0;
>
> - ret = flash->platform_data->power(&flash->subdev, on);
> + if (flash->platform_data->power)
> + ret = flash->platform_data->power(&flash->subdev, on);
> + else {
> + gpio_set_value(flash->platform_data->power_gpio, on);
> + if (on) {
> + /* Some delay is apparently required. */
> + udelay(20);
> + }
> + }
> +
> if (ret < 0)
> return ret;
>
> @@ -316,8 +337,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on)
> return 0;
>
> ret = adp1653_init_device(flash);
> - if (ret < 0)
> + if (ret >= 0)
> + return ret;
> +
> + if (flash->platform_data->power)
> flash->platform_data->power(&flash->subdev, 0);
> + else
> + gpio_set_value(flash->platform_data->power_gpio, 0);
>
> return ret;
> }
> @@ -407,21 +433,69 @@ static int adp1653_resume(struct device *dev)
>
> #endif /* CONFIG_PM */
>
> +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash,
> + struct device_node *node)
> +{
> + u32 val;
> + struct adp1653_platform_data *pd;
> + enum of_gpio_flags flags;
> + int gpio;
> + struct device_node *child;
> +
> + if (!node)
> + return -EINVAL;
> +
> + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd)
> + return -ENOMEM;
> + flash->platform_data = pd;
> +
> + child = of_get_child_by_name(node, "flash");
> + if (!child) return -EINVAL;

One statement per line, please. Same for other lines below.

> + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;
> + pd->max_flash_timeout = val;
> + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;
> + pd->max_flash_intensity = val/1000;
> + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
> + pd->max_torch_intensity = val/1000;
> +
> + child = of_get_child_by_name(node, "indicator");
> + if (!child) return -EINVAL;
> + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
> + pd->max_indicator_intensity = val;
> +
> + if (!of_find_property(node, "gpios", NULL)) {
> + dev_err(&client->dev, "No gpio node\n");
> + return -EINVAL;
> + }
> +
> + gpio = of_get_gpio_flags(node, 0, &flags);
> + if (gpio < 0) {
> + dev_err(&client->dev, "Error getting GPIO\n");
> + return -EINVAL;
> + }
> +
> + pd->power_gpio = gpio;
> + return 0;
> +}
> +
> +
> static int adp1653_probe(struct i2c_client *client,
> const struct i2c_device_id *devid)
> {
> struct adp1653_flash *flash;
> int ret;
>
> - /* we couldn't work without platform data */
> - if (client->dev.platform_data == NULL)
> - return -ENODEV;
> -
> flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
> if (flash == NULL)
> return -ENOMEM;
>
> flash->platform_data = client->dev.platform_data;
> + if (!flash->platform_data) {
> + ret = adp1653_of_init(client, flash, client->dev.of_node);
> + if (ret)
> + return ret;
> + }
>
> mutex_init(&flash->power_lock);
>
> diff --git a/include/media/adp1653.h b/include/media/adp1653.h
> index 1d9b48a..b556580 100644
> --- a/include/media/adp1653.h
> +++ b/include/media/adp1653.h
> @@ -100,9 +100,11 @@ struct adp1653_platform_data {
> int (*power)(struct v4l2_subdev *sd, int on);
>
> u32 max_flash_timeout; /* flash light timeout in us */
> - u32 max_flash_intensity; /* led intensity, flash mode */
> - u32 max_torch_intensity; /* led intensity, torch mode */
> - u32 max_indicator_intensity; /* indicator led intensity */
> + u32 max_flash_intensity; /* led intensity, flash mode, mA */
> + u32 max_torch_intensity; /* led intensity, torch mode, mA */
> + u32 max_indicator_intensity; /* indicator led intensity, uA */
> +
> + int power_gpio; /* for device-tree based boot */
> };
>
> #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev)
>


--

Cheers,
Mauro


\
 
 \ /
  Last update: 2014-12-23 19:01    [W:0.113 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site