Messages in this thread | | | Date | Mon, 22 Dec 2014 15:48:54 +0000 | From | Sid Boyce <> | Subject | Re: 3.19.0-rc1 nouvea build failure on GeForce GT 610 only |
| |
On 22/12/14 13:54, Paul Bolle wrote: > On Mon, 2014-12-22 at 14:37 +0100, Paul Bolle wrote: >> On Mon, 2014-12-22 at 13:01 +0000, Sid Boyce wrote: >>> CHK kernel/config_data.h >>> CC [M] drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.o >>> drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.c: In function >>> ‘nvd0_dmaobj_bind’: >>> drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.c:54:8: error: >>> ‘GM204_DISP_CORE_CHANNEL_DMA’ undeclared (first use in this function) >>> case GM204_DISP_CORE_CHANNEL_DMA: >>> ^ >>> drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.c:54:8: note: each >>> undeclared identifier is reported only once for each function it appears in >>> scripts/Makefile.build:257: recipe for target >>> 'drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.o' failed >>> make[4]: *** [drivers/gpu/drm/nouveau/core/engine/dmaobj/nvd0.o] Error 1 >>> scripts/Makefile.build:402: recipe for target 'drivers/gpu/drm/nouveau' >>> failed >>> make[3]: *** [drivers/gpu/drm/nouveau] Error 2 >>> scripts/Makefile.build:402: recipe for target 'drivers/gpu/drm' failed >>> make[2]: *** [drivers/gpu/drm] Error 2 >>> scripts/Makefile.build:402: recipe for target 'drivers/gpu' failed >>> make[1]: *** [drivers/gpu] Error 2 >>> Makefile:938: recipe for target 'drivers' failed >>> make: *** [drivers] Error 2 >>> >>> 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT >>> 610] (rev a1) >> Why would that controller influence the build? >> >>> No problems on 2 other boxes with GeForce 8600 GT] (rev a1) >> I ran into this error twice, while building Fedora 21 kernel rpms for >> v3.19-rc1 on my outdated ThinkPad X41 (which uses i915, for what it's >> worth). The error made very little sense to me. Especially since it >> didn't happen when building in the local git repository. >> >> So I basically, well, scrubbed the rpmbuild environment. And then the >> the third attempt to build kernels rpm succeeded! I assumed a hardware >> failure (see outdated above) and made a mental note to investigate that >> one of these days. >> >> But your report makes me think it's not my hardware. Could there be some >> _random_ failure with this driver in the build? Very odd... > A theory based on Mark's message in > https://lkml.org/lkml/2014/12/8/602 : > > My two failed builds somehow used previous version of class.h, that > didn't yet have commit 1f89b4756fb8 ("drm/gm204/disp: initial support") > applied. It's that commit which added the define for > GM204_DISP_CORE_CHANNEL_DMA. > > Is that even possible? Perhaps rpmbuild has a surprising way to handle > symlinks? All very puzzling... > > > Paul Bolle > > I did a git pull up to 3.19-rc1 separately on the 3 boxes and used the .config from 3.18.0 as the base of make oldconfig.
When the build failed I did "make mrproper" and used the .config from one of the other boxes, then from the other, all 3 .config gave the same error.
Successfully rebooted one of the boxes. sabre:~ # uname -r 3.19.0-rc1-smp+
Regards ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
| |