lkml.org 
[lkml]   [2014]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: Bump SD card pin drive strength up on rk3288-evb
Date
Am Mittwoch, 10. Dezember 2014, 12:55:29 schrieb Doug Anderson:
> It seems that ever since (536f6b9 mmc: dw_mmc: Reset DMA before
> enabling IDMAC) landed upstream that SD cards have been very unhappy
> on rk3288-evb. They were a little unhappy before that change, but
> after that change they're REALLY unhappy.
>
> It turns out that the above fix happens to fix a corruption when
> reading card information during probe time. Without the fix we didn't
> detect that high speed SD cards could actually support high speed.
> With the fix we suddenly detect that they're high speed and we try to
> use them at 50MHz. That doesn't work so well on EVB with the default
> drive strength (maybe because there are two physical SD card slots
> hooked up to the same pin?).
>
> Fix the problem by bumping up the drive strength of the sdmmc lines.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Fixes: 536f6b91d21b ("mmc: dw_mmc: Reset DMA before enabling IDMAC")

applied to my 3.19 dts-fixes branch
(after a slight modification of the subject: please use "ARM: dts: rockchip:")


Heiko


\
 
 \ /
  Last update: 2014-12-21 15:41    [W:0.065 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site