lkml.org 
[lkml]   [2014]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH net-next v2 1/1] net: Support for switch port configuration
On 12/18/14, 3:29 AM, Varlese, Marco wrote:
> From: Marco Varlese <marco.varlese@intel.com>
>
> Switch hardware offers a list of attributes that are configurable
> on a per port basis.
> This patch provides a mechanism to configure switch ports by adding
> an NDO for setting specific values to specific attributes.
> There will be a separate patch that adds the "get" functionality via
> another NDO and another patch that extends iproute2 to call the two
> new NDOs.
>
> Signed-off-by: Marco Varlese <marco.varlese@intel.com>
> ---
> include/linux/netdevice.h | 5 ++++
> include/uapi/linux/if_link.h | 15 ++++++++++++
> net/core/rtnetlink.c | 54 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 74 insertions(+)
>
> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> index c31f74d..4881c7b 100644
> --- a/include/linux/netdevice.h
> +++ b/include/linux/netdevice.h
> @@ -1027,6 +1027,9 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev,
> * int (*ndo_switch_port_stp_update)(struct net_device *dev, u8 state);
> * Called to notify switch device port of bridge port STP
> * state change.
> + * int (*ndo_switch_port_set_cfg)(struct net_device *dev,
> + * u32 attr, u64 value);
> + * Called to set specific switch ports attributes.
> */
> struct net_device_ops {
> int (*ndo_init)(struct net_device *dev);
> @@ -1185,6 +1188,8 @@ struct net_device_ops {
> struct netdev_phys_item_id *psid);
> int (*ndo_switch_port_stp_update)(struct net_device *dev,
> u8 state);
> + int (*ndo_switch_port_set_cfg)(struct net_device *dev,
> + u32 attr, u64 value);
> #endif
> };
>
> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
> index f7d0d2d..19cb51a 100644
> --- a/include/uapi/linux/if_link.h
> +++ b/include/uapi/linux/if_link.h
> @@ -146,6 +146,7 @@ enum {
> IFLA_PHYS_PORT_ID,
> IFLA_CARRIER_CHANGES,
> IFLA_PHYS_SWITCH_ID,
> + IFLA_SWITCH_PORT_CFG,
> __IFLA_MAX
> };
>
> @@ -603,4 +604,18 @@ enum {
>
> #define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
>
> +/* Switch Port Attributes section */
> +
> +enum {
> + IFLA_ATTR_UNSPEC,
> + IFLA_ATTR_LEARNING,
Any reason you want learning here ?. This is covered as part of the
bridge setlink attributes.

> + IFLA_ATTR_LOOPBACK,
> + IFLA_ATTR_BCAST_FLOODING,
> + IFLA_ATTR_UCAST_FLOODING,
> + IFLA_ATTR_MCAST_FLOODING,
> + __IFLA_ATTR_MAX
> +};
> +
> +#define IFLA_ATTR_MAX (__IFLA_ATTR_MAX - 1)
> +
> #endif /* _UAPI_LINUX_IF_LINK_H */
> diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
> index eaa057f..c0d1c45 100644
> --- a/net/core/rtnetlink.c
> +++ b/net/core/rtnetlink.c
> @@ -1389,6 +1389,46 @@ static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[])
> return 0;
> }
>
> +#ifdef CONFIG_NET_SWITCHDEV
> +static int do_setswcfg(struct net_device *dev, struct nlattr *attr)
> +{
> + int rem, err = -EINVAL;
> + struct nlattr *v;
> + const struct net_device_ops *ops = dev->netdev_ops;
> +
> + nla_for_each_nested(v, attr, rem) {
> + u32 op = nla_type(v);
> + u64 value = 0;
> +
> + switch (op) {
> + case IFLA_ATTR_LEARNING:
> + case IFLA_ATTR_LOOPBACK:
> + case IFLA_ATTR_BCAST_FLOODING:
> + case IFLA_ATTR_UCAST_FLOODING:
> + case IFLA_ATTR_MCAST_FLOODING: {
> + if (nla_len(v) < sizeof(value)) {
> + err = -EINVAL;
> + break;
> + }
> +
> + value = nla_get_u64(v);
> + err = ops->ndo_switch_port_set_cfg(dev,
> + op,
> + value);
> + break;
> + }
> + default:
> + err = -EINVAL;
> + break;
> + }
> + if (err)
> + break;
> + }
> + return err;
> +}
> +
> +#endif
> +
> static int do_setvfinfo(struct net_device *dev, struct nlattr *attr)
> {
> int rem, err = -EINVAL;
> @@ -1740,6 +1780,20 @@ static int do_setlink(const struct sk_buff *skb,
> status |= DO_SETLINK_NOTIFY;
> }
> }
> +#ifdef CONFIG_NET_SWITCHDEV
> + if (tb[IFLA_SWITCH_PORT_CFG]) {
> + err = -EOPNOTSUPP;
> + if (!ops->ndo_switch_port_set_cfg)
> + goto errout;
> + if (!ops->ndo_switch_parent_id_get)
> + goto errout;
> + err = do_setswcfg(dev, tb[IFLA_SWITCH_PORT_CFG]);
> + if (err < 0)
> + goto errout;
> +
> + status |= DO_SETLINK_NOTIFY;
> + }
> +#endif
> err = 0;
>
> errout:



\
 
 \ /
  Last update: 2014-12-18 16:21    [W:0.133 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site