lkml.org 
[lkml]   [2014]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Possible regression with commit 52221610d
From
On Tue, Dec 16, 2014 at 10:18 AM, Bjorn Andersson <bjorn@kryo.se> wrote:

> We are routing the regulators straight to vdd of the memory and should
> hence use vmmc to specify this. However unless I actually program 0x29
> in the Qualcomm sdhci block I get no responses from the card.
>
> Which I believe is correct behavior as the SDHC specification [1] says
> the following about BIT(0) of 0x29:
>
> "If this bit is cleared, the Host Controller shall immediately stop
> driving CMD and DAT[3:0] (tri-state) and drive SDCLK to low level".
>
>
> So I think 52221610d is indeed incorrect.
>
> [1] https://www.sdcard.org/downloads/pls/simplified_specs/archive/partA2_300.pdf

Agreed. Host controllers that fail to implement the required internal
regulator configured via bits 1-3 of the Power Control Register may
still follow the specification with regard to bit zero of that same
register. The driver should be updated to configure bit zero
appropriately even when an external regulator is used.

If you like, I can propose a patch or if you have one ready, I will be
happy to review yours.

Thanks,
Tim Kryger


\
 
 \ /
  Last update: 2014-12-17 08:01    [W:0.051 / U:2.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site