lkml.org 
[lkml]   [2014]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] USB: serial: add nt124 usb to serial driver
From
Johan,

While working on the tx_empty changes you suggested it occurred to me
that it might not be obvious to others that the firmware doesn't send
a packet with the NT124_CTRL_TXEMPTY flag cleared when it begins
transmitting. The practical implication is that if the driver sets
tx_empty = true when it sees NT124_CTRL_TXEMPTY, tx_empty must be
reset to false somewhere when more data is transmitted. Perhaps I
could add prepare_write_buffer and do it in there before calling
usb_serial_generic_prepare_write_buffer(). Does that sound acceptable?
If so I'll also initialize tx_empty = true in nt124_port_probe.

Regards,
George


\
 
 \ /
  Last update: 2014-12-14 19:21    [W:0.055 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site