lkml.org 
[lkml]   [2014]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor
Date
Shunt resistance values greater than the chip's calibration factor make no
sense since the actual value written to the register equals:

<calibration factor> / <shunt>

Bail-out from ina2xx_probe() if the configured value is greater than the
calibration factor.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/hwmon/ina2xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 39e017b..3234e57 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -313,7 +313,8 @@ static int ina2xx_probe(struct i2c_client *client,
data->config = &ina2xx_config[data->kind];
data->client = client;

- if (data->rshunt <= 0)
+ if (data->rshunt <= 0 ||
+ data->rshunt > data->config->calibration_factor)
return -ENODEV;

ret = ina2xx_init(data);
--
2.1.3


\
 
 \ /
  Last update: 2014-12-13 18:01    [W:0.064 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site