lkml.org 
[lkml]   [2014]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 00/15] Resource tracking/allocation framework
On Wed, Dec 10, 2014 at 06:23:49PM +0100, A H wrote:
> 10 gru 2014 17:16 "Russell King - ARM Linux" <linux@arm.linux.org.uk>
> napisał(a):
> >
> > On Wed, Dec 10, 2014 at 04:48:18PM +0100, Andrzej Hajda wrote:
> > > 3. There are drivers which can work without specific resource, but if
> > > the resource becomes available/unavailable it can do some additional
> stuff.
> > > An example of such driver is DRM driver (more precisely
> drm_connector) -
> > > it can start without attached drm_panel, but if the panel becomes
> available it
> > > can react by generating HPD event and start using it.
> >
> > Bad example, and actually incorrect. DRM connectors are referenced in
> > userspace by an IDR number, which can be re-used in the case of a
> > connector appearing, disappearing, and then a different connector
> > re-appearing.
>
> But it is not about reappearing of drm_connector, it is about reappearing
> of drm_panel which is fortunately not a part of drm driver. Connector here
> is only consumer of drm_panel which should have possibility to receive
> notifications on panel (dis-)appearance.

Okay, so that's exactly like a panel being "hotplugged" to the connector,
which should be fine.

--
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2014-12-10 19:21    [W:1.679 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site