lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [LKP] [dmi] PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
From
On 7 November 2014 06:47, LKP <lkp@01.org> wrote:
> FYI, we noticed the below changes on
>
> https://git.linaro.org/people/ard.biesheuvel/linux-arm efi-for-3.19
> commit aacdce6e880894acb57d71dcb2e3fc61b4ed4e96 ("dmi: add support for SMBIOS 3.0 64-bit entry point")
>
>
> +-----------------------+------------+------------+
> | | 2fa165a26c | aacdce6e88 |
> +-----------------------+------------+------------+
> | boot_successes | 20 | 10 |
> | early-boot-hang | 1 | |
> | boot_failures | 0 | 5 |
> | PANIC:early_exception | 0 | 5 |
> +-----------------------+------------+------------+
>
>
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
> [ 0.000000] bootconsole [earlyser0] enabled
> [ 0.000000] NX (Execute Disable) protection: active
> PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
> [ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
> [ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
> [ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
> [ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
> [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
> [ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
> [ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
> [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
> [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
> [ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
> [ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
> [ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
> [ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
> [ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
> [ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
> [ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
> [ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
> [ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
> [ 0.000000] RIP 0x4
>

This is most puzzling. Could anyone decode the exception?
This looks like the non-EFI path through dmi_scan_machine(), which
calls dmi_present() /after/ calling dmi_smbios3_present(), which
apparently has not found the _SM3_ header tag. Or could the call stack
be inaccurate?

Anyway, it would be good to know the exact type of the platform, and
perhaps we could find out if there is an inadvertent _SM3_ tag
somewhere in the 0xF0000 - 0xFFFFF range?

--
Ard.


\
 
 \ /
  Last update: 2014-11-07 09:01    [W:0.096 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site