lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15
On 11/07/2014 12:47 PM, Nishanth Menon wrote:
> BeagleBoard-X15 is the next generation Open Source Hardware
> BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
> processor. The platform features 2GB DDR3L (w/dual 32bit busses),
> eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
> port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
> Ethernet.
>
> For more information, refer to:
> BeagleBoard-X15 Wiki:
> http://www.elinux.org/Beagleboard:BeagleBoard-X15
>
> AM5728 is part of the Sitara product family whose additional details
> will be available: http://www.ti.com/lsds/ti/arm/overview.page
>
> Technical Reference Manual for AM5728 is public domain at:
> http://www.ti.com/lit/spruhz6
>
> Just add basic support for the moment, the following updates are needed:
> i) Ethernet - depends on SoC dts fixes
> ii) USB Client (USB2) - depends on GPIO extcon
> ii) HDMI - additional driver fixes pending
> iii) Audio - additional driver fixes pending
>
> NOTE:
> AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
> unused power supply balls must be supplied with the voltages specified
> in the Section 5.2, Recommended Operating Conditions". This implies
> that all unused voltage rails for AM5728 can never be switched off even
> if the hardware blocks inside that voltage domain is unused. Switching
> off these unused rails may result in stability issues on other domains
> and increased leakage and power-on-hour impacts.
>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>

Reviewed-by: Tom Rini <trini@ti.com>


--
Tom


\
 
 \ /
  Last update: 2014-11-07 20:01    [W:0.036 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site