Messages in this thread | | | From | Heiko Stübner <> | Subject | Re: [PATCH] ARM: dts: rockchip: add pinctrl nodes for SPDIF, LCDC, CIF, HDMI, USB and GPS | Date | Fri, 07 Nov 2014 17:52:23 +0100 |
| |
Hi Julien,
Am Freitag, 7. November 2014, 16:19:49 schrieb Julien CHAUVEAU: > On RK3066, add pinctrl nodes for SPDIF, LCDC1, CIF0/1, HDMI and USB. > On RK3188, add pinctrl nodes for SPDIF, LCDC1, CIF and GPS.
Please don't bulk-add pinctrl settings nobody is using for the forseeable future. There are currently no spdif, lcdc, cif and hdmi drivers for those socs and things like the usb_vbus and sd_pwr pins are used as gpios through regulators.
Pinctrl settings can be added in the same patch adding the device node, _after_ a driver got accepted.
> At the same time, add some missing pinctrl for SDMMC0 and SDMMC1 > and fix the unit addresses of GPIO0 and GPIO1 banks in rk3188.dtsi.
I you're concatenating change descriptions by "and" or your "At the same time", it's a good indicator that these should be two separate patches. The general rule is, one patch - one issue.
So I'd suggest resending the address fix for the two gpios and leaving the pin settings be till something really uses them,
Heiko
| |