lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFCv2 0/8] [media] si4713 DT binding
On 10/21/14 17:06, Sebastian Reichel wrote:
> Hi,
>
> This is the RFCv2 patchset adding DT support to the si4713
> radio transmitter i2c driver. The changes can be summarized
> as follows:
>
> * Move regulator information back into the driver. The
> regulators needed are documented in the chip and have
> nothing to do with boarddata. Instead devm_regulator_get_optional
> is used and errors are handled quite loosely now. Maybe the USB
> driver should provide dummy regulators.
> * GPIO handling is updated to gpiod consumer interface, resulting
> in a driver cleanup and easy DT handling
> * The driver is updated to use managed resources wherever possible
>
> So much about the nice stuff. But there is also
>
> * Instantiation of the platform device from the i2c (sub-)device. Since DT
> is not supposed to contain linuxisms the device is a simple i2c node
> resulting in the i2c probe function being called. Thus registering the main
> v4l device must happen from there.
>
> Tested:
> * Compilation on torvalds/linux.git:master (based on 52d589a)
> * Booting in DT mode
> * Some simply driver queries using v4l2-ctl
>
> Not tested:
> * The USB driver, since I do not own the USB dongle

I will test this on Monday for the USB device. It looks good, but I need
to verify that it doesn't break the USB driver.

Regards,

Hans

> * The legacy platform code (only DT boot has been tested).
> (The legacy platform code is supposed to removed in the near future anyways)
>
> Changes since RFCv1 (requested by Hans Verkuil):
> - splitted the patchset into more patches
> - replaced dev_info with dev_dbg for missing regulators
> - check for ENOSYS value from devm_gpiod_get (disabled GPIOLIB)
>
> -- Sebastian
>
> Sebastian Reichel (8):
> [media] si4713: switch to devm regulator API
> [media] si4713: switch reset gpio to devm_gpiod API
> [media] si4713: use managed memory allocation
> [media] si4713: use managed irq request
> [media] si4713: add device tree support
> [media] si4713: add DT binding documentation
> ARM: OMAP2: RX-51: update si4713 platform data
> [media] si4713: cleanup platform data
>
> Documentation/devicetree/bindings/media/si4713.txt | 30 ++++
> arch/arm/mach-omap2/board-rx51-peripherals.c | 69 ++++-----
> drivers/media/radio/si4713/radio-platform-si4713.c | 28 +---
> drivers/media/radio/si4713/si4713.c | 167 +++++++++++++--------
> drivers/media/radio/si4713/si4713.h | 15 +-
> include/media/radio-si4713.h | 30 ----
> include/media/si4713.h | 4 +-
> 7 files changed, 186 insertions(+), 157 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/si4713.txt
> delete mode 100644 include/media/radio-si4713.h
>



\
 
 \ /
  Last update: 2014-11-07 14:21    [W:0.217 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site