lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/panel: update innolux n116bge timings
On Mon, Sep 22, 2014 at 06:12:41PM +0800, Daniel Kurtz wrote:
> On Mon, Sep 22, 2014 at 4:39 PM, Thierry Reding
> <thierry.reding@gmail.com> wrote:
> >
> > On Tue, Sep 02, 2014 at 10:56:46AM +0800, Daniel Kurtz wrote:
> > > There are several different models of N116BGE. According to the commit
> > > that added innolux_n116bge_mode [0], this N116BGE is for the eDP variety.
> > >
> > > [0] commit 0a2288c06aab73c966e82045c8f20b0e713baf2a
> > > Author: Thierry Reding <treding@nvidia.com>
> > > Date: Thu Jul 3 14:02:59 2014 +0200
> > >
> > > drm/panel: simple: Add Innolux N116BGE panel support
> > >
> > > The clock and htotal values from add by that patch are out of spec according to
> > > the datasheets I have seen for the eDP N116BGE (-EA2 and -EB2).
> >
> > Does out of spec imply that these timings aren't working for you?
>
> No, I didn't even try with your values, actually.
> Out of spec just means that the numbers do not fall between Min and
> Max on the datasheet:
>
> 72.6 <= DCLK <= 80.24 vs. 71
> 1506 <= htotal <= 1716 vs. 1500
>
> > > This patch changes the values to the "Typ" values on the datasheet.
> >
> > The original patch was based on -E42 of the datasheet. But I can run
> > some tests to see if the timings in this patch work on the panel that I
> > have. If so I guess the easiest would be to apply this.
>
> Thanks!

Took me a while longer to test this than I had expected. Turns out the
Tegra132 Norrin board that I have works with the timings you provide in
this patch too, so I'm going to apply this patch.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-11-07 13:21    [W:0.058 / U:1.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site