lkml.org 
[lkml]   [2014]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v17 1/5] thermal: rockchip: add driver for thermal
Hello Caesar,

On Sat, Nov 01, 2014 at 10:44:29AM +0800, Caesar Wang wrote:
> Thermal is TS-ADC Controller module supports
> user-defined mode and automatic mode.
>
> User-defined mode refers,TSADC all the control signals entirely by
> software writing to register for direct control.
>
> Automaic mode refers to the module automatically poll TSADC output,
> and the results were checked.If you find that the temperature High
> in a period of time,an interrupt is generated to the processor
> down-measures taken;If the temperature over a period of time High,
> the resulting TSHUT gave CRU module,let it reset the entire chip,
> or via GPIO give PMIC.
>

First thing, very good progress in this driver!

> Signed-off-by: zhaoyifeng <zyf@rock-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Just for the sake of code / documentation history, this patch, which
adds the driver, should come after patch 2, which adds dt documentation.

> ---
> drivers/thermal/Kconfig | 9 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/rockchip_thermal.c | 711 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 721 insertions(+)
> create mode 100644 drivers/thermal/rockchip_thermal.c

<big cut>

> +static int
> +rockchip_thermal_register_sensor(struct platform_device *pdev,
> + struct rockchip_thermal_data *thermal,
> + struct rockchip_thermal_sensor *sensor,
> + enum sensor_id id)
> +{
> + const struct rockchip_tsadc_chip *tsadc = thermal->chip;
> + int error;
> +
> + tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
> + tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
> +
> + sensor->thermal = thermal;
> + sensor->id = id;
> + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
> + rockchip_thermal_get_temp,
> + NULL,
> + rockchip_thermal_set_trips);

So, did I miss something here? Looks like you have extended the of
thermal, and I haven't seen the patch.
CC [M] drivers/thermal/rockchip_thermal.o
drivers/thermal/rockchip_thermal.c: In function
`rockchip_thermal_register_sensor':
drivers/thermal/rockchip_thermal.c:482:7: error: too many arguments to
function `thermal_zone_of_sensor_register'
rockchip_thermal_set_trips);


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-11-07 03:01    [W:0.200 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site