lkml.org 
[lkml]   [2014]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
On Mon, Oct 27, 2014 at 06:31:12PM +0200, Octavian Purdila wrote:
> From: Daniel Baluta <daniel.baluta@intel.com>
>
> This patch adds GPIO and IRQ support for the Diolan DLN-2 GPIO module.

[...]

> +static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
> + unsigned int pin, int value)
> +{
> + struct dln2_gpio_pin_val req = {
> + .pin = cpu_to_le16(pin),
> + .value = cpu_to_le16(value),

Drop cpu_to_le16 (value is u8).

> + };
> +
> + dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
> + sizeof(req));
> +}
> +
> +#define DLN2_GPIO_DIRECTION_IN 0
> +#define DLN2_GPIO_DIRECTION_OUT 1
> +
> +static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> + struct dln2_gpio_pin req = {
> + .pin = cpu_to_le16(offset),
> + };
> + struct dln2_gpio_pin_val rsp;
> + int len = sizeof(rsp);
> + int ret;
> +
> + ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
> + if (ret < 0)
> + return ret;
> +
> + /* cache the pin direction */
> + ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
> + &req, sizeof(req), &rsp, &len);
> + if (ret < 0)
> + return ret;
> + if (len < sizeof(rsp) || req.pin != rsp.pin) {
> + ret = -EPROTO;
> + goto out_disable;
> + }
> +
> + switch (rsp.value) {
> + case DLN2_GPIO_DIRECTION_IN:
> + clear_bit(offset, dln2->output_enabled);
> + return 0;
> + case DLN2_GPIO_DIRECTION_OUT:
> + set_bit(offset, dln2->output_enabled);
> + return 0;
> + default:
> + ret = -EPROTO;
> + goto out_disable;
> + }
> +
> +out_disable:
> + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
> + return ret;
> +}
> +
> +static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> +
> + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
> +}
> +
> +static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> +
> + if (test_bit(offset, dln2->output_enabled))
> + return GPIOF_DIR_OUT;
> +
> + return GPIOF_DIR_IN;
> +}
> +
> +static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> + int dir;
> +
> + dir = dln2_gpio_get_direction(chip, offset);
> + if (dir < 0)
> + return dir;
> +
> + if (dir == GPIOF_DIR_IN)
> + return dln2_gpio_pin_get_in_val(dln2, offset);
> +
> + return dln2_gpio_pin_get_out_val(dln2, offset);
> +}
> +
> +static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> +
> + dln2_gpio_pin_set_out_val(dln2, offset, value);
> +}
> +
> +static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
> + unsigned dir)
> +{
> + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
> + struct dln2_gpio_pin_val req = {
> + .pin = cpu_to_le16(offset),
> + .value = cpu_to_le16(dir),

Same here.

Johan


\
 
 \ /
  Last update: 2014-11-05 17:01    [W:0.084 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site