lkml.org 
[lkml]   [2014]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 11/13] arm: dts: dra7: add DMA properties for UART
On Tue, Nov 04, 2014 at 07:32:07PM +0100, Javier Martinez Canillas wrote:
> Hello,
>
> On Tue, Nov 4, 2014 at 6:21 PM, Lennart Sorensen
> <lsorense@csclub.uwaterloo.ca> wrote:
> >> Mind sharing the manual with me? Mine does not mention DMA channels for
> >> UART7-10. If you are able to test 7+8 (and it works) could you please
> >> make patch which with for the remaining four devices?
> >
> > Well the file I have is called AM572x_ES1.1_NDA_TRM_vT.pdf, so I am not
> > sure who I am allowed to share that file with. Might be simpler to just
> > ask TI for the latest version.
> >
> > How I hate NDAs.
> >
>
> I saw today an announcement about a public AM572x Silicon Revision 1.1
> TRM [0] that has just made available by TI. I'm not familiar with this
> SoC so I don't know if that has the information you want but I thought
> it was worth to mention in case it did.
>
> Best regards,
> Javier
>
> [0]: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf

That's the right one.

Page 3622 has the dma channels for uart 7 through 10, but it still needs
the updated crossbar dma driver to work.

--
Len Sorensen


\
 
 \ /
  Last update: 2014-11-04 21:01    [W:0.121 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site