lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/1] mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
Date
> -----Original Message-----
> From: Chen, Alvin
> Sent: Tuesday, November 4, 2014 8:46 AM
> To: 'Bryan O'Donoghue'; Tan, Raymond; Lee Jones; Samuel Ortiz
> Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
> Subject: RE: [PATCH 1/1] mfd: intel_quark_i2c_gpio: Add Intel Quark X1000
> I2C-GPIO MFD Driver
>
> >
> > On 03/11/14 07:39, Raymond Tan wrote:
> > > + pdata->properties->irq = pdev->irq;
> > > + pdata->properties->irq_shared = true;
> >
> > OK I see it.
> >
> > Thanks.
> >
> > My question is. How extensively have edge triggered interrupts been
> > tested on the GPIO block ?
> >
> > The BSP reference code is quite explicit about not missing edge interrupts.
> >
> > Have you tested GPIO input in edge mode ?
> We indeed test edge mode. Now all are moved to gpio-dwapb module which
> has been accepted by maintainer.
> The BSP code doesn't meet the requirement of upstream, so we totally
> re-implement this feature in gpio-dwapb.
> This patch only passes the necessary parameters and registers the platform
> devices.
>
>
Just double check, the support of Quark designware GPIO has been in 3.18-rc2.



\
 
 \ /
  Last update: 2014-11-04 02:01    [W:0.088 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site