lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
On Thu, Oct 30, 2014 at 02:16:04PM +0100, Matthias Brugger wrote:
> 2014-10-29 6:37 GMT+01:00 Xudong Chen <xudong.chen@mediatek.com>:
> > +static int mt_i2c_do_transfer(struct mt_i2c *i2c)
> > +{
> > + u16 addr_reg;
> > + u16 control_reg;
> > + int tmo = i2c->adap.timeout;
> > +
> > + i2c->trans_stop = false;
> > + i2c->irq_stat = 0;
> > +
> > + /* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
> > + if (i2c->have_pmic)
> > + i2c_writew(I2C_CONTROL_WRAPPER, i2c, OFFSET_PATH_DIR);
>
> So this is some sort of multiplexer bit, right?
> I think in this case we need to build a multi function device (mfd)
> where the pmic driver will set this bit.

This bit is in the i2c controller register space, so it shouldn't be
controlled by some other driver. I think the configuration of this
register is already in the correct place. What I could think of is that
the PMIC could implement a pinctrl driver and the i2c controller driver
gets the pins from the PMIC. Anyway, the controlling of this bit would
still be in the i2c driver.

Sascha

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2014-11-03 09:41    [W:0.086 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site